[rtc-linux] Re: [PATCH V4 1/5] DT: mfd: add device-tree binding doc fro PMIC max77620/max20024

[Laxman Dewangan <ldewangan@nvidia.com>]

On Tuesday 26 January 2016 08:28 PM, Lee Jones wrote:
> On Mon, 25 Jan 2016, Laxman Dewangan wrote:
>
>> Hmm. I describe the boolean and tristate only. Do I need to define
>> type for integer,string also?
> I wouldn't describe any of them.  It's normally pretty obvious which
> properties are boolean by the lack of required cell description.
>

Rob suggested to use the type also for Boolean and tristate. I think it 
is good to have for all places that what type of values are valid.


>>>> +The property for fps child nodes as:
>>>> +Required properties:
>>>> +	-reg: FPS number like 0, 1, 2 for FPS0, FPS1 and FPS2 respectively.
>>> I'm surprised Rob Acked this.  We don't usually do device numbers in DT.
>> What is best way to make the child node for FPS and differentiate FPS0,1, 2?
>> What is your suggestion here?
> There are lots of ways you can solve this and so many examples of
> others doing so.  I suggest you have a look at some DTS files and
> figure it out.  One possible solution is to use different compatible
> strings.
Here, I think I can go similar to regulators where child node name 
identifies the regulators.

     fps-config {
         fps0 {
             maxim,fps-time-period-us = <1280>;
             maxim,fps-enable-input = <FPS_EN_SRC_EN0>;
         };

         fps1 {
             maxim,fps-time-period-us = <2560>;
             maxim,fps-enable-input = <FPS_EN_SRC_EN1>;
         };

         fps2 {
             maxim,fps-time-period-us = <640>;
             maxim,fps-enable-input = <FPS_EN_SRC_SW>;
         };
     };

So node name gives the FPS name.

>>> +Pinmux and GPIO:
>>> +===============
>>> I think this whole section needs moving to ../pinctrl and needs to be
>>> reviewed by Linus W.
>> Is this mean I need to create DT binding doc for the each subsystem
>> differently?
>> Actually during AS3722, I had different understanding to have single file.
> Yes, that way you have each of the the subsystem experts review your
> documentation.  You can then link to them from this document.
OK, I will add different dt binding doc in respective driver and squash 
that with respected submodule drivers.

-- 
-- 
You received this message because you are subscribed to "rtc-linux".
Membership options at http://groups.google.com/group/rtc-linux .
Please read http://groups.google.com/group/rtc-linux/web/checklist
before submitting a driver.
--- 
You received this message because you are subscribed to the Google Groups "rtc-linux" group.
To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.