From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Sender: rtc-linux@googlegroups.com Received: from mail-wm0-x235.google.com (mail-wm0-x235.google.com. [2a00:1450:400c:c09::235]) by gmr-mx.google.com with ESMTPS id f138si324531wmf.3.2016.06.20.02.03.10 for (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Mon, 20 Jun 2016 02:03:10 -0700 (PDT) Received: by mail-wm0-x235.google.com with SMTP id r201so51510290wme.1 for ; Mon, 20 Jun 2016 02:03:10 -0700 (PDT) Subject: [rtc-linux] Re: [PATCH 5/5] regulator: qcom_rpm-regulator: Add support for pm8018 rpm regulator To: Bjorn Andersson References: <1466158929-19524-1-git-send-email-narmstrong@baylibre.com> <1466158929-19524-6-git-send-email-narmstrong@baylibre.com> <20160617165352.GA1256@tuxbot> Cc: dmitry.torokhov@gmail.com, andy.gross@linaro.org, david.brown@linaro.org, lee.jones@linaro.org, lgirdwood@gmail.com, broonie@kernel.org, a.zummo@towertech.it, alexandre.belloni@free-electrons.com, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org, rtc-linux@googlegroups.com From: Neil Armstrong Message-ID: <5767B147.5000102@baylibre.com> Date: Mon, 20 Jun 2016 11:03:03 +0200 MIME-Version: 1.0 In-Reply-To: <20160617165352.GA1256@tuxbot> Content-Type: text/plain; charset=UTF-8 Reply-To: rtc-linux@googlegroups.com List-ID: List-Post: , List-Help: , List-Archive: , List-Unsubscribe: , On 06/17/2016 06:53 PM, Bjorn Andersson wrote: > On Fri 17 Jun 03:22 PDT 2016, Neil Armstrong wrote: > >> In order to support eh Qualcomm MDM9615 SoC, add support for the >> PM8018 RPM regulator in the qcom_rpm-regulator driver. >> >> Signed-off-by: Neil Armstrong > [..] >> diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c > [..] >> +/** >> + * enum rpm_vreg_voltage_corner - possible voltage corner values >> + * >> + * These should be used in regulator_set_voltage and rpm_vreg_set_voltage calls >> + * for corner type regulators as if they had units of uV. >> + */ >> +enum rpm_vreg_voltage_corner { >> + RPM_VREG_CORNER_NONE = 1, >> + RPM_VREG_CORNER_LOW, >> + RPM_VREG_CORNER_NOMINAL, >> + RPM_VREG_CORNER_HIGH, >> +}; >> + >> +static struct regulator_linear_range corner_ranges[] = { >> + REGULATOR_LINEAR_RANGE(RPM_VREG_CORNER_NONE, 0, >> + RPM_VREG_CORNER_HIGH, 1), >> +}; >> + >> static int rpm_reg_write(struct qcom_rpm_reg *vreg, > [..] >> + >> +static const struct qcom_rpm_reg pm8018_corner = { >> + .desc.linear_ranges = corner_ranges, >> + .desc.n_linear_ranges = ARRAY_SIZE(corner_ranges), >> + .desc.n_voltages = 4, >> + .desc.ops = &uV_ops, >> + .parts = &rpm8018_corner_parts, >> +}; >> + > [..] >> +static const struct rpm_regulator_data rpm_pm8018_regulators[] = { > [..] >> + { "dig_corner", QCOM_RPM_VOLTAGE_CORNER, &pm8018_corner, >> + "vdd_dig_corner" }, >> + >> + { } >> +}; > > We have discussed the corners for a long time and I think we've > concluded that they should be exposed as something like an OPP. What we > have agreed on is that they should not be exposed as a regulator with > voltages 1-4uV. > > So please drop the corner for now. OK, Thanks, Neil > > Regards, > Bjorn > -- You received this message because you are subscribed to "rtc-linux". Membership options at http://groups.google.com/group/rtc-linux . Please read http://groups.google.com/group/rtc-linux/web/checklist before submitting a driver. --- You received this message because you are subscribed to the Google Groups "rtc-linux" group. To unsubscribe from this group and stop receiving emails from it, send an email to rtc-linux+unsubscribe@googlegroups.com. For more options, visit https://groups.google.com/d/optout.