Re: [PATCH v4 2/2] rtc: max31335: add driver support

[Guenter Roeck <linux@roeck-us.net>]

On Wed, Nov 01, 2023 at 11:48:14AM +0200, Antoniu Miclaus wrote:
> RTC driver for MAX31335 ±2ppm Automotive Real-Time Clock with
> Integrated MEMS Resonator.
> 
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> ---
> changes in v4:
>  - add Kconfig entry for HWMON dependency.
>  MAINTAINERS                |   8 +
>  drivers/rtc/Kconfig        |  20 +
>  drivers/rtc/Makefile       |   1 +
>  drivers/rtc/rtc-max31335.c | 765 +++++++++++++++++++++++++++++++++++++
>  4 files changed, 794 insertions(+)
>  create mode 100644 drivers/rtc/rtc-max31335.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index dd5de540ec0b..bc484cb997ab 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12823,6 +12823,14 @@ F:	Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
>  F:	Documentation/hwmon/max31827.rst
>  F:	drivers/hwmon/max31827.c
>  
> +MAX31335 RTC DRIVER
> +M:	Antoniu Miclaus <antoniu.miclaus@analog.com>
> +L:	linux-rtc@vger.kernel.org
> +S:	Supported
> +W:	https://ez.analog.com/linux-software-drivers
> +F:	Documentation/devicetree/bindings/rtc/adi,max31335.yaml
> +F:	drivers/rtc/rtc-max31335.c
> +
>  MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
>  L:	linux-hwmon@vger.kernel.org
>  S:	Orphan
> diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
> index d7502433c78a..360da13fe61b 100644
> --- a/drivers/rtc/Kconfig
> +++ b/drivers/rtc/Kconfig
> @@ -373,6 +373,26 @@ config RTC_DRV_MAX8997
>  	  This driver can also be built as a module. If so, the module
>  	  will be called rtc-max8997.
>  
> +config RTC_DRV_MAX31335
> +	tristate "Analog Devices MAX31335"
> +	depends on I2C
> +	select REGMAP_I2C
> +	help
> +	  If you say yes here you get support for the Analog Devices
> +	  MAX31335.
> +
> +	  This driver can also be built as a module. If so, the module
> +	  will be called rtc-max31335.
> +
> +config RTC_DRV_MAX31335_HWMON
> +	bool "HWMON support for Analog Devices MAX31335"
> +	depends on RTC_DRV_MAX31335 && HWMON
> +	depends on !(RTC_DRV_MAX31335=y && HWMON=m)
> +	default y
> +	help
> +	  Say Y here if you want to expose temperature sensor data on
> +	  rtc-max31335.
> +

This isn't used in the driver. Did you test with HWMON=n ?

Guenter