messages from 2015-05-08 09:52:13 to 2015-05-21 16:17:44 UTC [more...]
[rtc-linux] [PATCH v3 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver
2015-05-21 16:16 UTC (2+ messages)
` [rtc-linux] [PATCH v3 1/6] rtc: arm: imx: snvs: change use syscon to access register
[rtc-linux] [PATCH] rtc: snvs: fix wakealarm by call enable_irq_wake earlier
2015-05-21 15:29 UTC
[rtc-linux] [PATCH V3 0/4] da9062: DA9062 driver submission
2015-05-21 13:48 UTC (9+ messages)
` [rtc-linux] [PATCH V3 3/4] watchdog: da9062: DA9062 watchdog driver
` [rtc-linux] "
` [rtc-linux] "
` [rtc-linux] [PATCH V3 2/4] regulator: da9062: DA9062 regulator driver
` [rtc-linux] "
` [rtc-linux] "
` [rtc-linux] [PATCH V3 4/4] devicetree: da9062: Add bindings for DA9062 driver
` [rtc-linux] [PATCH V3 1/4] mfd: da9062: DA9062 MFD core driver
[rtc-linux] [RFC PATCH 1/2] Revert "rtc-cmos: Add an alarm disable quirk"
2015-05-21 8:31 UTC (8+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH v2 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver
2015-05-21 1:16 UTC (21+ messages)
` [rtc-linux] [PATCH v2 1/7] arm: imx: power-off: change to syscon to access register
` [rtc-linux] [PATCH v2 2/7] rtc: arm: imx: snvs: change use "
` [rtc-linux] "
` [rtc-linux] [PATCH v2 3/7] Document: dt: fsl: snvs: change support syscon
` [rtc-linux] [PATCH v2 4/7] arm: dts: imx: update snvs to use syscon access register
` [rtc-linux] [PATCH v2 5/7] input: keyboard: imx: add snvs power key driver
` [rtc-linux] [PATCH v2 6/7] document: devicetree: input: imx: i.mx snvs power device tree bindings
` [rtc-linux] [PATCH v2 7/7] arm: dts: imx6sx: enable snvs power key
` [rtc-linux] Re: [PATCH v2 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver
[rtc-linux] [RFC PATCH 2/2] rtc: Restore the RTC alarm time to the configured alarm time in BIOS Setup
2015-05-20 4:30 UTC (3+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH v2 0/2] clk: adapt ->round_rate()/->determine_rate() prototypes
2015-05-20 1:01 UTC (7+ messages)
` [rtc-linux] [PATCH v2 1/2] clk: change clk_ops' ->round_rate() prototype
` [rtc-linux] "
rtc: ep93xx: Use readl/writel for io
2015-05-20 0:13 UTC (3+ messages)
` [rtc-linux] "
` [rtc-linux] "
[V2] rtc: rtc-v3020: use gpio_request_array()
2015-05-19 22:11 UTC (2+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH V2 0/4] da9062: DA9062 driver submission
2015-05-19 10:16 UTC (19+ messages)
` [rtc-linux] [PATCH V2 1/4] mfd: da9062: DA9062 MFD core driver
` [rtc-linux] [PATCH V2 4/4] devicetree: da9062: Add bindings for DA9062 driver
` [rtc-linux] [PATCH V2 2/4] regulator: da9062: DA9062 regulator driver
` [rtc-linux] [PATCH V2 3/4] watchdog: da9062: DA9062 watchdog driver
` [rtc-linux] "
` [rtc-linux] "
[rtc-linux] [PATCH 0/2] add dt support for mxc rtc
2015-05-19 5:27 UTC (6+ messages)
` [rtc-linux] [PATCH 1/2] rtc: mxc: add a second clock
` [rtc-linux] "
` [rtc-linux] [PATCH 2/2] rtc: mxc: add support of device tree
[rtc-linux] [PATCH 0/2] rtc: Fix module autoload for max77xx RTC drivers
2015-05-18 22:45 UTC (5+ messages)
` [rtc-linux] [PATCH 1/2] rtc: max77686: Report platform modalias to fix module autoload
` [rtc-linux] [PATCH 2/2] rtc: max77802: "
` [rtc-linux] Re: [PATCH 0/2] rtc: Fix module autoload for max77xx RTC drivers
RTC: Add MODULE_DEVICE_TABLE to rtc-ds1672/rtc-max6900/rtc-max8998
2015-05-18 22:26 UTC (2+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH resend 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver
2015-05-18 22:17 UTC (15+ messages)
` [rtc-linux] [PATCH 1/7] arm: imx: power-off: change to syscon to access register
` [rtc-linux] "
` [rtc-linux] [PATCH 2/7] rtc: arm: imx: snvs: change use "
` [rtc-linux] "
` [rtc-linux] [PATCH 3/7] Document: dt: fsl: snvs: change support syscon
` [rtc-linux] [PATCH 4/7] arm: dts: imx: update snvs to use syscon access register
` [rtc-linux] "
` [rtc-linux] [PATCH 5/7] input: keyboard: imx: add snvs power key driver
` [rtc-linux] "
` [rtc-linux] [PATCH 6/7] document: devicetree: input: imx: i.mx snvs power device tree bindings
` [rtc-linux] [PATCH 7/7] arm: dts: imx6sx: enable snvs power key
` [rtc-linux] Re: [PATCH resend 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver
[rtc-linux] [PATCH v4 0/6] SA1100/PXA RTC clean-up
2015-05-18 18:43 UTC (10+ messages)
` [rtc-linux] [PATCH v4 1/6] rtc: sa1100: prepare to share sa1100_rtc_ops
` [rtc-linux] [PATCH v4 2/6] rtc: pxa: convert to use shared sa1100 functions
` [rtc-linux] [PATCH v4 3/6] ARM: pxa: add memory resource to SA1100 RTC device
` [rtc-linux] [PATCH v4 4/6] rtc: sa1100/pxa: convert to run-time register mapping
` [rtc-linux] [PATCH v4 5/6] ARM: sa1100: remove unused RTC register definitions
` [rtc-linux] [PATCH v4 6/6] ARM: mmp: "
` [PATCH v4 0/6] SA1100/PXA RTC clean-up
` [rtc-linux] "
[rtc-linux] [PATCH] rtc: mt6397: fix build on some 32bits platforms
2015-05-17 10:47 UTC (4+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH v2 0/2] RTC support for NXP LPC18xx family
2015-05-16 16:53 UTC (8+ messages)
` [rtc-linux] [PATCH v2 1/2] rtc: add rtc-lpc24xx driver
` [rtc-linux] "
` [rtc-linux] [PATCH v2 2/2] doc: dt: add documentation for nxp,lpc1788-rtc
[rtc-linux] [PATCH 1/2] drivers/rtc/interface.c: Change rtc_set_mmss() to use time64_t
2015-05-16 9:19 UTC (4+ messages)
` [rtc-linux] [PATCH 2/2] sparc: time: Provide update_persistent_clock64()
` [rtc-linux] Re: [PATCH 1/2] drivers/rtc/interface.c: Change rtc_set_mmss() to use time64_t
[rtc-linux] [PATCH 0/2] RTC support for NXP LPC18xx family
2015-05-14 22:56 UTC (7+ messages)
` [rtc-linux] [PATCH 1/2] rtc: add rtc-lpc24xx driver
` [rtc-linux] "
` [rtc-linux] [PATCH 2/2] doc: dt: add documentation for nxp,lpc1788-rtc
[rtc-linux] [PATCH] rtc: pfc8563: fix uninitialized variable warning
2015-05-14 21:50 UTC (2+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH] rtc: armada38x: Remove the unused variables
2015-05-14 21:48 UTC (2+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH] rtc: stmp3xxx select STMP_DEVICE
2015-05-14 21:14 UTC
[rtc-linux] [PATCH 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver
2015-05-14 17:18 UTC (8+ messages)
` [rtc-linux] [PATCH 1/7] arm: imx: power-off: change to syscon to access register
` [rtc-linux] [PATCH 2/7] rtc: arm: imx: snvs: change use "
` [rtc-linux] [PATCH 3/7] Document: dt: fsl: snvs: change support syscon
` [rtc-linux] [PATCH 4/7] arm: dts: imx: update snvs to use syscon access register
` [rtc-linux] [PATCH 5/7] input: keyboard: imx: add snvs power key driver
` [rtc-linux] [PATCH 6/7] document: devicetree: input: imx: i.mx snvs power device tree bindings
` [rtc-linux] [PATCH 7/7] arm: dts: imx6sx: enable snvs power key
[rtc-linux] [PATCH V1 0/6] COVER LETTER
2015-05-13 14:56 UTC (12+ messages)
` [rtc-linux] [PATCH V1 3/6] rtc: da9062: DA9062 RTC driver
` [rtc-linux] [PATCH V1 5/6] watchdog: da9062: DA9062 watchdog driver
` [rtc-linux] "
` [rtc-linux] "
[rtc-linux] [PATCH] rtc: armada38x: remove unused variables
2015-05-12 22:03 UTC (2+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH v3 0/4] SA1100 RTC clean-up for ARM64
2015-05-12 20:49 UTC (14+ messages)
` [rtc-linux] [PATCH v3 1/4] ARM: pxa: add memory resource to RTC device
` [rtc-linux] "
` "
` [rtc-linux] [PATCH v3 2/4] rtc: sa1100: convert to run-time register mapping
` [rtc-linux] [PATCH v3 3/4] ARM: sa1100: remove unused RTC register definitions
` [rtc-linux] [PATCH v3 4/4] ARM: mmp: "
[rtc-linux] [PATCH v2 00/12] mfd: Add support for Clocksource to LPC set
2015-05-12 15:55 UTC (14+ messages)
` [rtc-linux] [PATCH v2 01/12] mfd: dt-bindings: Provide human readable define for Clocksource mode
` [rtc-linux] [PATCH v2 02/12] clocksource: sti: Provide support for the ST LPC Clocksource IP
` [rtc-linux] "
` [rtc-linux] [PATCH v2 03/12] clocksource: sti: Provide 'use timer as sched clock' capability
` [rtc-linux] [PATCH v2 04/12] clocksource: bindings: Provide bindings for ST's LPC Clocksource device
` [rtc-linux] [PATCH v2 05/12] watchdog: st_wdt: Update IP layout information to include Clocksource
` [rtc-linux] [PATCH v2 06/12] watchdog: bindings: Supply knowledge of a third supported device - clocksource
` [rtc-linux] [PATCH v2 07/12] rtc: st: Update IP layout information to include Clocksource
` [rtc-linux] [PATCH v2 08/12] rtc: bindings: Supply knowledge of a third supported device - clocksource
` [rtc-linux] [PATCH v2 09/12] MAINTAINERS: Add the LPC Clocksource to STi maintained driver list
` [rtc-linux] [PATCH v2 10/12] ARM: STi: DT: STih407: Switch LPC mode from RTC to Clocksource
` [rtc-linux] [PATCH v2 11/12] ARM: STi: Enable LPC Clocksource
` [rtc-linux] [PATCH v2 12/12] ARM: STi: Update platform level menuconfig 'help'
[rtc-linux] [PATCH v4 0/3] Add Mediatek SoC RTC driver
2015-05-12 8:41 UTC (4+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH 00/12] mfd: watchdog: rtc: Add LPC Clocksource driver
2015-05-11 11:52 UTC (20+ messages)
` [rtc-linux] [PATCH 02/12] clocksource: sti: Provide support for the ST LPC Clocksource IP
` [rtc-linux] "
` [rtc-linux] [PATCH 03/12] clocksource: sti: Provide 'use timer as sched clock' capability
` [rtc-linux] "
` [rtc-linux] [PATCH 07/12] rtc: st: Update IP layout information to include Clocksource
rtc: mc13xxx: fix obfuscated and wrong format string
2015-05-11 7:26 UTC (2+ messages)
[PATCH] rtc: snvs: improve timeout handling in snvs_rtc_enable()
2015-05-10 21:42 UTC (2+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH v2 0/4] SA1100 RTC clean-up for ARM64
2015-05-10 10:31 UTC (5+ messages)
` [rtc-linux] [PATCH v2 2/4] rtc: sa1100: convert to run-time register mapping
` [rtc-linux] "
[1/2] RTC: Add core rtc support for Gemini Soc devices
2015-05-08 18:28 UTC (10+ messages)
` [rtc-linux] "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox