messages from 2015-05-18 11:19:38 to 2015-06-05 11:38:14 UTC [more...]
[rtc-linux] [PATCH v2 0/2] clk: adapt ->round_rate()/->determine_rate() prototypes
2015-06-05 11:38 UTC (10+ messages)
` [rtc-linux] [PATCH v2 1/2] clk: change clk_ops' ->round_rate() prototype
` [rtc-linux] "
[rtc-linux] [PATCH 0/2] add dt support for mxc rtc
2015-06-04 22:22 UTC (12+ messages)
` [rtc-linux] [PATCH 1/2] rtc: mxc: add a second clock
` [rtc-linux] "
` [rtc-linux] [PATCH 2/2] rtc: mxc: add support of device tree
` [rtc-linux] "
[rtc-linux] [PATCH 0/2] change "client->irq >= 0" to "client->irq > 0"
2015-06-03 19:20 UTC (10+ messages)
` [rtc-linux] [PATCH 1/2] iio: "
` [rtc-linux] "
` [rtc-linux] [PATCH 2/2] rtc: "
` [rtc-linux] "
` [rtc-linux] Re: [PATCH 0/2] "
[5/5] drivers/rtc/sa1100: Replace deprecated rtc_tm_to_time() and rtc_time_to_tm()
2015-06-03 14:17 UTC (7+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH v4 0/6] SA1100/PXA RTC clean-up
2015-06-03 5:31 UTC (5+ messages)
` "
` [rtc-linux] "
[rtc-linux] [PATCH v2 1/4] drivers/rtc/pcf8563: Replace deprecated rtc_time_to_tm() and rtc_tm_to_time()
2015-06-03 1:19 UTC (8+ messages)
` [rtc-linux] [PATCH v2 2/4] rtc/lib: Introduce rtc_tm_subtract() helper function
` [rtc-linux] [PATCH v2 3/4] drivers/rtc/isl1208: Replace deprecated rtc_tm_to_time()
` [rtc-linux] [PATCH v2 4/4] drivers/rtc/sunxi: "
` [rtc-linux] Re: [PATCH v2 1/4] drivers/rtc/pcf8563: Replace deprecated rtc_time_to_tm() and rtc_tm_to_time()
[rtc-linux] [PATCH 0/4] Add Device tree support for 88PM800 mfd and rtc driver
2015-06-02 10:18 UTC (16+ messages)
` [rtc-linux] [PATCH 1/4] mfd: 88pm800: add device tree support
` [rtc-linux] "
` [rtc-linux] [PATCH 2/4] mfd: 88pm800: use irq_mode to configure interrupt status reg clear method
` [rtc-linux] "
` [rtc-linux] [PATCH 3/4] rtc: 88pm80x: add device tree support
` [rtc-linux] [PATCH 4/4] mfd: 88pm800: allocate pdata->rtc if not allocated earlier
` [rtc-linux] "
[rtc-linux] [PATCH v2 1/4] NTP: rtc: Add CONFIG_RTC_SYSTOHC_DEVICE for NTP synchronization
2015-06-02 9:14 UTC (4+ messages)
` [rtc-linux] [PATCH v2 2/4] sparc: time: Replace update_persistent_clock() with CONFIG_RTC_SYSTOHC
` [rtc-linux] [PATCH v2 3/4] drivers/rtc/interface.c: Remove rtc_set_mmss()
` [rtc-linux] [PATCH v2 4/4] cris: time: Cleanup of persistent clock stuff
[rtc-linux] [PATCH RESEND 1/3] drivers/rtc/pcf8563: Replace deprecated rtc_time_to_tm() and rtc_tm_to_time()
2015-06-02 3:21 UTC (7+ messages)
` [rtc-linux] [PATCH RESEND 2/3] drivers/rtc/isl1208: Replace deprecated rtc_tm_to_time()
` [rtc-linux] "
` [rtc-linux] [PATCH RESEND 3/3] drivers/rtc/sunxi: "
` [rtc-linux] "
` [rtc-linux] Re: [PATCH RESEND 1/3] drivers/rtc/pcf8563: Replace deprecated rtc_time_to_tm() and rtc_tm_to_time()
[rtc-linux] [PATCH v2 1/4] NTP: rtc: Add CONFIG_RTC_SYSTOHC_DEVICE for NTP synchronization
2015-06-02 3:18 UTC (6+ messages)
` [rtc-linux] [PATCH v2 2/4] sparc: time: Replace update_persistent_clock() with CONFIG_RTC_SYSTOHC
` [rtc-linux] [PATCH v2 3/4] drivers/rtc/interface.c: Remove rtc_set_mmss()
` [rtc-linux] [PATCH v2 4/4] cris: time: Cleanup of persistent clock stuff
` [rtc-linux] Re: [PATCH v2 1/4] NTP: rtc: Add CONFIG_RTC_SYSTOHC_DEVICE for NTP synchronization
[rtc-linux] [PATCH v5 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver
2015-06-01 20:25 UTC (16+ messages)
` [rtc-linux] [PATCH v5 1/6] rtc: arm: imx: snvs: change use syscon to access register
` [rtc-linux] "
` [rtc-linux] [PATCH v5 2/6] Document: dt: fsl: snvs: change support syscon
` [rtc-linux] [PATCH v5 3/6] ARM: dts: imx: update snvs to use syscon access register
` [rtc-linux] [PATCH v5 4/6] input: keyboard: imx: add snvs power key driver
` [rtc-linux] "
` [rtc-linux] [PATCH v5 5/6] Document: devicetree: input: imx: i.mx snvs power device tree bindings
` [rtc-linux] [PATCH v5 6/6] ARM: dts: imx6sx: enable snvs power key
` [rtc-linux] Re: [PATCH v5 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver
[rtc-linux] [PATCH RESEND] rtc: snvs: fix wakealarm by call enable_irq_wake earlier
2015-06-01 18:35 UTC
[rtc-linux] [PATCH v2 00/12] mfd: Add support for Clocksource to LPC set
2015-06-01 7:38 UTC (7+ messages)
` [rtc-linux] [PATCH v2 02/12] clocksource: sti: Provide support for the ST LPC Clocksource IP
` [rtc-linux] [PATCH v2.1 "
` [rtc-linux] "
` [rtc-linux] [PATCH v2 03/12] clocksource: sti: Provide 'use timer as sched clock' capability
` [rtc-linux] "
` [rtc-linux] Re: [PATCH v2 00/12] mfd: Add support for Clocksource to LPC set
[v2] rtc: Fix suspend/resume for APM X-Gene SoC RTC driver
2015-05-31 22:55 UTC (2+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH v2] rtc: pcf8563 fix: return -EINVAL if we read an invalid time
2015-05-30 22:21 UTC (5+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH v3] rtc: pcf8563 fix: return -EINVAL if we read an invalid time
2015-05-30 21:56 UTC (2+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH] rtc: snvs: fix wakealarm by call enable_irq_wake earlier
2015-05-30 20:53 UTC (2+ messages)
[rtc-linux] [PATCH] rtc: palmas: Initialise bb_charging flag before using it
2015-05-29 12:14 UTC
[rtc-linux] [PATCH] rtc: sa1100: drop mach/irqs.h include
2015-05-28 19:48 UTC (2+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH V4 0/3] da9062: DA9062 driver submission
2015-05-28 13:33 UTC (4+ messages)
` [rtc-linux] [PATCH V4 1/3] mfd: da9062: DA9062 MFD core driver
` [rtc-linux] [PATCH V4 3/3] devicetree: da9062: Add bindings for DA9062 driver
` [rtc-linux] [PATCH V4 2/3] watchdog: da9062: DA9062 watchdog driver
drivers/rtc/rtc-ds1307.c: Support optional wakeup interrupt source
2015-05-28 13:09 UTC (3+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH V3 0/4] da9062: DA9062 driver submission
2015-05-28 12:52 UTC (11+ messages)
` [rtc-linux] [PATCH V3 3/4] watchdog: da9062: DA9062 watchdog driver
` [rtc-linux] "
` [rtc-linux] "
` [rtc-linux] [PATCH V3 2/4] regulator: da9062: DA9062 regulator driver
` [rtc-linux] "
` [rtc-linux] "
` [rtc-linux] [PATCH V3 1/4] mfd: da9062: DA9062 MFD core driver
` [rtc-linux] "
` [rtc-linux] "
` [rtc-linux] [PATCH V3 4/4] devicetree: da9062: Add bindings for DA9062 driver
[rtc-linux] [RFC PATCH 2/2] rtc: Restore the RTC alarm time to the configured alarm time in BIOS Setup
2015-05-28 11:16 UTC (5+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH] rtc: pcf8563 fix: return -EINVAL if we read an invalid time
2015-05-27 8:55 UTC (2+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH 1/2] rtc-isl1208: Add device tree binding
2015-05-26 20:49 UTC (4+ messages)
` [rtc-linux] [PATCH 2/2] rtc-isl1208: add device tree support
` [rtc-linux] "
[rtc-linux] [PATCH] driver: rtc: pcf2127: use OFS flag to detect unreliable date and warn the user
2015-05-26 8:17 UTC
[rtc-linux] [PATCH v4 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver
2015-05-25 7:39 UTC (14+ messages)
` [rtc-linux] [PATCH v4 1/6] rtc: arm: imx: snvs: change use syscon to access register
` [rtc-linux] "
` [rtc-linux] [PATCH v4 2/6] Document: dt: fsl: snvs: change support syscon
` [rtc-linux] "
` [rtc-linux] [PATCH v4 3/6] arm: dts: imx: update snvs to use syscon access register
` [rtc-linux] "
` [rtc-linux] [PATCH v4 4/6] input: keyboard: imx: add snvs power key driver
` [rtc-linux] "
` [rtc-linux] [PATCH v4 5/6] document: devicetree: input: imx: i.mx snvs power device tree bindings
` [rtc-linux] [PATCH v4 6/6] arm: dts: imx6sx: enable snvs power key
` [rtc-linux] "
` [rtc-linux] Re: [PATCH v4 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver
[rtc-linux] [PATCH v3 0/6] Change snvs rtc and poweroff to use syscon add pwrkey driver
2015-05-25 5:54 UTC (9+ messages)
` [rtc-linux] [PATCH v3 1/6] rtc: arm: imx: snvs: change use syscon to access register
` [rtc-linux] "
` [rtc-linux] [PATCH v3 2/6] Document: dt: fsl: snvs: change support syscon
` [rtc-linux] [PATCH v3 3/6] arm: dts: imx: update snvs to use syscon access register
` [rtc-linux] [PATCH v3 4/6] input: keyboard: imx: add snvs power key driver
` [rtc-linux] [PATCH v3 5/6] document: devicetree: input: imx: i.mx snvs power device tree bindings
` [rtc-linux] [PATCH v3 6/6] arm: dts: imx6sx: enable snvs power key
[rtc-linux] [RFC PATCH 1/2] Revert "rtc-cmos: Add an alarm disable quirk"
2015-05-22 6:20 UTC (13+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH v2 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver
2015-05-21 1:16 UTC (21+ messages)
` [rtc-linux] [PATCH v2 1/7] arm: imx: power-off: change to syscon to access register
` [rtc-linux] [PATCH v2 2/7] rtc: arm: imx: snvs: change use "
` [rtc-linux] "
` [rtc-linux] [PATCH v2 3/7] Document: dt: fsl: snvs: change support syscon
` [rtc-linux] [PATCH v2 4/7] arm: dts: imx: update snvs to use syscon access register
` [rtc-linux] [PATCH v2 5/7] input: keyboard: imx: add snvs power key driver
` [rtc-linux] [PATCH v2 6/7] document: devicetree: input: imx: i.mx snvs power device tree bindings
` [rtc-linux] [PATCH v2 7/7] arm: dts: imx6sx: enable snvs power key
` [rtc-linux] Re: [PATCH v2 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver
rtc: ep93xx: Use readl/writel for io
2015-05-20 0:13 UTC (3+ messages)
` [rtc-linux] "
` [rtc-linux] "
[V2] rtc: rtc-v3020: use gpio_request_array()
2015-05-19 22:11 UTC (2+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH V2 0/4] da9062: DA9062 driver submission
2015-05-19 10:16 UTC (17+ messages)
` [rtc-linux] [PATCH V2 1/4] mfd: da9062: DA9062 MFD core driver
` [rtc-linux] [PATCH V2 3/4] watchdog: da9062: DA9062 watchdog driver
` [rtc-linux] "
` [rtc-linux] "
[rtc-linux] [PATCH 0/2] rtc: Fix module autoload for max77xx RTC drivers
2015-05-18 22:45 UTC (2+ messages)
` [rtc-linux] "
RTC: Add MODULE_DEVICE_TABLE to rtc-ds1672/rtc-max6900/rtc-max8998
2015-05-18 22:26 UTC (2+ messages)
` [rtc-linux] "
[rtc-linux] [PATCH resend 0/7] Change snvs rtc and poweroff to use syscon add pwrkey driver
2015-05-18 22:17 UTC (5+ messages)
` [rtc-linux] [PATCH 4/7] arm: dts: imx: update snvs to use syscon access register
` [rtc-linux] "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox