messages from 2019-02-18 20:04:26 to 2019-03-22 16:18:39 UTC [more...]
[BACKPORT 4.14.y 0/8] candidates from spreadtrum 4.14 product kernel
2019-03-22 16:17 UTC
[PATCH 1/2] rtc: da9063: set range
2019-03-22 15:28 UTC (4+ messages)
` [PATCH 2/2] rtc: da9063: switch to rtc_time64_to_tm/rtc_tm_to_time64
[PATCH 1/4] rtc: wm831x: set range
2019-03-22 9:37 UTC (8+ messages)
` [PATCH 2/4] rtc: wm831x: remove unnecessary goto
` [PATCH 3/4] rtc: wm831x: switch to rtc_time64_to_tm/rtc_tm_to_time64
` [PATCH 4/4] rtc: wm831x: convert to SPDX identifier
[PATCH] rtc: Fix timestamp value for RTC_TIMESTAMP_BEGIN_1900
2019-03-22 7:26 UTC
[PATCH 1/3] rtc: sh: stop resetting time to epoch
2019-03-22 7:26 UTC (8+ messages)
` [PATCH 2/3] rtc: sh: fix possible race condition
` [PATCH 3/3] rtc: sh: set range
[PATCH 1/3] rtc: sun4v: switch to rtc_time64_to_tm/rtc_tm_to_time64
2019-03-22 7:22 UTC (3+ messages)
` [PATCH 2/3] rtc: sun4v: set range
` [PATCH 3/3] rtc: sun4v: switch to SPDX identifier
[PATCH 1/4] rtc: wm831x: set range
2019-03-22 7:13 UTC (4+ messages)
` [PATCH 2/4] rtc: wm831x: remove unnecessary goto
` [PATCH 3/4] rtc: wm831x: switch to rtc_time64_to_tm/rtc_tm_to_time64
` [PATCH 4/4] rtc: wm831x: convert to SPDX identifier
[PATCH 1/3] rtc: omap: switch to rtc_time64_to_tm/rtc_tm_to_time64
2019-03-22 6:35 UTC (5+ messages)
` [PATCH 2/3] rtc: omap: convert to SPDX identifier
` [PATCH 3/3] rtc: omap: checkpatch cleanup
[PATCH 1/2 v2] rtc: x1205: Add DT bindings
2019-03-22 6:23 UTC (3+ messages)
` [PATCH 2/2 v2] rtc: x1205: Add DT probing support
[PATCH 1/6] rtc: at91sam9: drop platform_data support
2019-03-21 10:11 UTC (7+ messages)
` [PATCH 2/6] rtc: at91sam9: convert to devm_rtc_allocate_device
` [PATCH 3/6] rtc: at91sam9: set range
` [PATCH 4/6] rtc: at91sam9: switch to rtc_time64_to_tm/rtc_tm_to_time64
` [PATCH 5/6] rtc: at91sam9: convert to SPDX identifier
` [PATCH 6/6] rtc: at91sam9: correct trivial checkpatch warnings
[PATCH v2 0/9] Add Support for MediaTek PMIC MT6358
2019-03-21 9:51 UTC (28+ messages)
` [PATCH v2 1/9] mfd: mt6397: clean up code
` [PATCH v2 2/9] mfd: mt6397: extract irq related code from core driver
` [PATCH v2 3/9] dt-bindings: mfd: Add compatible for the MediaTek MT6358 PMIC
` [PATCH v2 4/9] regulator: Add document for MT6358 regulator
` [PATCH v2 6/9] regulator: mt6358: Add support "
` [PATCH v2 7/9] arm64: dts: mt6358: add PMIC MT6358 related nodes
` [PATCH v2 8/9] rtc: mt6397: fix alarm register overwrite
` [PATCH v2 9/9] rtc: Add support for the MediaTek MT6358 RTC
` [PATCH v2 5/9] mfd: Add support for the MediaTek MT6358 PMIC
[PATCH 0/4] da9063: convert to SPDX
2019-03-20 19:19 UTC (4+ messages)
` [PATCH 4/4] rtc: da9063: convert header "
[PATCH 1/4] rtc: ps3: switch to rtc_time64_to_tm/rtc_tm_to_time64
2019-03-20 15:56 UTC (5+ messages)
` [PATCH 2/4] rtc: ps3: convert to SPDX identifier
` [PATCH 3/4] rtc: ps3: convert to devm_rtc_allocate_device
` [PATCH 4/4] rtc: ps3: set range
[PATCH 1/4] rtc: dm355evm: convert to devm_rtc_allocate_device
2019-03-20 12:43 UTC (4+ messages)
` [PATCH 2/4] rtc: dm355evm: set range
` [PATCH 3/4] rtc: dm355evm: switch to rtc_time64_to_tm/rtc_tm_to_time64
` [PATCH 4/4] rtc: dm355evm: convert to SPDX identifier
[PATCH] rtc: brcmstb-waketimer: switch to rtc_time64_to_tm
2019-03-20 12:39 UTC
[PATCH 1/6] rtc: goldfish: convert to devm_rtc_allocate_device
2019-03-20 12:34 UTC (6+ messages)
` [PATCH 2/6] rtc: goldfish: add range
` [PATCH 3/6] rtc: goldfish: sort headers
` [PATCH 4/6] rtc: goldfish: allow building on more than MIPS
` [PATCH 5/6] rtc: goldfish: switch to rtc_time64_to_tm/rtc_tm_to_time64
` [PATCH 6/6] rtc: goldfish: convert to SPDX identifier
[PATCH 1/7] rtc: xgene: fix possible race condition
2019-03-20 12:32 UTC (7+ messages)
` [PATCH 2/7] rtc: xgene: set range
` [PATCH 3/7] rtc: xgene: convert to SPDX identifier
` [PATCH 4/7] rtc: xgene: correct checkpatch issues
` [PATCH 5/7] rtc: xgene: stop caching alarm_time
` [PATCH 6/7] rtc: xgene: switch to rtc_time64_to_tm/rtc_tm_to_time64
` [PATCH 7/7] rtc: xgene: use .set_time
[PATCH] rtc: sd3078: fix manufacturer name
2019-03-20 12:10 UTC
[PATCH] rtc: test: do not use assignment in if condition
2019-03-20 12:03 UTC
[PATCH] rtc: 88pm80x: convert to SPDX identifier
2019-03-20 12:02 UTC
[PATCH] rtc: ab-b5ze-s3: correct checkpatch issues
2019-03-20 11:59 UTC
[PATCH] rtc: core: correct trivial checkpatch warnings
2019-03-20 11:59 UTC
[PATCH] rtc: sh: Fix invalid alarm warning for non-enabled alarm
2019-03-20 10:38 UTC (2+ messages)
[PATCH] rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configured
2019-03-20 10:38 UTC (3+ messages)
[PATCH] rtc: omap: let the core handle range
2019-03-20 6:18 UTC (8+ messages)
[PATCH -next] rtc: opal: Make opal_tpo_alarm_irq_enable static
2019-03-19 15:25 UTC
[PATCH v7 0/6] support a new type of PMIC,including two chips(rk817 and rk809)
2019-03-19 14:47 UTC (3+ messages)
[PATCH V5 1/4] dt-bindings: fsl: scu: add general interrupt support
2019-03-18 3:10 UTC (4+ messages)
` [PATCH V5 2/4] firmware: imx: enable imx scu general irq function
` [PATCH V5 3/4] arm64: dts: freescale: imx8qxp: enable scu general irq channel
` [PATCH V5 4/4] rtc: imx-sc: add rtc alarm support
[PATCH V4 1/4] dt-bindings: fsl: scu: add general interrupt support
2019-03-18 2:58 UTC (9+ messages)
` [PATCH V4 2/4] firmware: imx: enable imx scu general irq function
` [PATCH V4 3/4] arm64: dts: freescale: imx8qxp: enable scu general irq channel
` [PATCH V4 4/4] rtc: imx-sc: add rtc alarm support
[PATCH 1/3] rtc: mv: convert to SPDX identifier
2019-03-15 13:49 UTC (8+ messages)
` [PATCH 2/3] rtc: mv: convert to devm_rtc_allocate_device
` [PATCH 3/3] rtc: mv: add range
[PATCH] rtc: convert core to SPDX identifier
2019-03-13 22:04 UTC
[PATCH 1/5] rtc: ab-b5ze-s3: remove mutex
2019-03-13 21:04 UTC (5+ messages)
` [PATCH 2/5] rtc: ab-b5ze-s3: remove unnecessary gotos
` [PATCH 3/5] rtc: ab-b5ze-s3: switch to rtc_time64_to_tm/rtc_tm_to_time64
` [PATCH 4/5] rtc: ab-b5ze-s3: convert to SPDX identifier
` [PATCH 5/5] rtc: ab-b5ze-s3: remove unnecessary check
[PATCH] mfd: mt6397: Don't call irq_dispose_mapping
2019-03-11 7:55 UTC
[GIT PULL] RTC for 5.1
2019-03-08 18:35 UTC (2+ messages)
[PATCH] rtc: zynqmp: convert to SPDX identifier
2019-03-07 11:04 UTC
[PATCH v10 0/9] support ROHM BD70528 PMIC
2019-03-06 10:38 UTC (6+ messages)
[PATCH 1/3] rtc: abx80x: convert to SPDX identifier
2019-03-06 9:51 UTC (3+ messages)
` [PATCH 2/3] rtc: abx80x: use rtc_add_group
` [PATCH 3/3] rtc: abx80x: remove useless .remove
[PATCH] rtc: pic32: convert to SPDX identifier
2019-03-04 19:23 UTC
[PATCH] rtc: rv8803: convert to SPDX identifier
2019-03-04 19:20 UTC
[PATCH] rtc: update my email address
2019-03-04 19:19 UTC
[PATCH] rtc: tx4939: convert to SPDX identifier
2019-03-04 19:08 UTC
[PATCH 1/2] rtc: pic32: convert to devm_rtc_allocate_device
2019-03-04 10:20 UTC (2+ messages)
` [PATCH 2/2] rtc: pic32: let the core handle range
[PATCH] rtc: rv8803: let the core handle range
2019-03-04 10:04 UTC
[PATCH 0/5] Add EPSON RX-8571 RTC support
2019-03-04 7:36 UTC (6+ messages)
` [PATCH 1/5] rtc: rx8581: Add rx8571 compatible
` [PATCH 2/5] rtc: rx8581: Add support for rx8571 RTC
` [PATCH 3/5] rtc: rx8581: Add support for Epson "
[PATCH 1/4] rtc: tx4939: remove useless test
2019-03-03 22:21 UTC (4+ messages)
` [PATCH 2/4] rtc: tx4939: set range
` [PATCH 3/4] rtc: tx4939: switch to rtc_time64_to_tm/rtc_tm_to_time64
` [PATCH 4/4] rtc: tx4939: use .set_time
[PATCH 1/2] rtc: zynqmp: fix possible race condition
2019-03-03 21:45 UTC (2+ messages)
` [PATCH 2/2] rtc: zynqmp: let the core handle range
[PATCH] rtc: imx-sc: use rtc_time64_to_tm
2019-03-03 21:14 UTC
[PATCH] rtc: pcf85063: remove dead code
2019-03-02 20:58 UTC (2+ messages)
[RFC PATCH v1 00/13] support ROHM BD70528 PMIC
2019-02-28 15:37 UTC (5+ messages)
` [RFC PATCH v1 07/13] devicetree: bindings: Document first ROHM BD70528 bindings
High Quality IoT/M2M Products with Affordable Price and 3-Year Warranty
2019-02-28 3:20 UTC
[PATCH] rtc: remove rtc_class_ops.read_callback
2019-02-25 20:24 UTC
[PATCH V3 1/4] dt-bindings: fsl: scu: add general interrupt support
2019-02-20 5:46 UTC (6+ messages)
` [PATCH V3 2/4] firmware: imx: enable imx scu general irq function
` [PATCH V3 3/4] arm64: dts: freescale: imx8qxp: enable scu general irq channel
` [PATCH V3 4/4] rtc: imx-sc: add rtc alarm support
[PATCH V2 0/4] Add i.MX SCU general interrupt support
2019-02-19 3:11 UTC (6+ messages)
` [PATCH V2 1/4] dt-bindings: fsl: scu: add "
` [PATCH V2 4/4] rtc: imx-sc: add rtc alarm support
[PATCH v3 2/2] dt-bindings: rtc: add ABEOZ9 support
2019-02-18 21:36 UTC (4+ messages)
[PATCH v3 1/2] rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support
2019-02-18 21:36 UTC (2+ messages)
[PATCH v3 2/2] dt-bindings: rtc: add ABEOZ9 support
2019-02-18 21:35 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).