On Fri, Aug 21, 2026 at 02:55:57PM +0100, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> 
> rzn1_rtc_set_alarm() updates RZN1_RTC_ALM, RZN1_RTC_ALH and
> RZN1_RTC_ALW using separate MMIO writes without first disabling the
> alarm interrupt. If a previous alarm is still enabled, the interrupt
> can fire while the alarm registers contain a mixture of old and newly
> written values.
> 
> Fix this by disabling the alarm interrupt before reprogramming ALM, ALH
> and ALW with a call to rzn1_rtc_alarm_irq_enable().
> 
> Fixes: b5ad1bf00d2c4 ("rtc: rzn1: Add alarm support")
> Cc: stable@vger.kernel.org
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>

Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>