* Re: [PATCH v1 04/10] iio: adc: cpcap-adc: add support for Mot ADC
From: Andy Shevchenko @ 2026-01-26 10:11 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: Jonathan Cameron, David Lechner, Nuno Sá, Andy Shevchenko,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Dmitry Torokhov,
Lee Jones, Pavel Machek, Liam Girdwood, Mark Brown,
Alexandre Belloni, Dixit Parmar, Tony Lindgren, linux-iio,
devicetree, linux-kernel, linux-input, linux-leds, linux-rtc
In-Reply-To: <20260125134302.45958-5-clamor95@gmail.com>
On Sun, Jan 25, 2026 at 03:42:56PM +0200, Svyatoslav Ryhel wrote:
> Add support for ADC found in Motorola Mot board, used as a base for
> Atrix 4G and Droid X2 smartphones.
...
> - { }
> + { /* sentinel */ },
Stray change.
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply
* Re: [PATCH v1 02/10] regulator: cpcap-regulator: add support for Mot regulators
From: Andy Shevchenko @ 2026-01-26 10:10 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: Jonathan Cameron, David Lechner, Nuno Sá, Andy Shevchenko,
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Dmitry Torokhov,
Lee Jones, Pavel Machek, Liam Girdwood, Mark Brown,
Alexandre Belloni, Dixit Parmar, Tony Lindgren, linux-iio,
devicetree, linux-kernel, linux-input, linux-leds, linux-rtc
In-Reply-To: <20260125134302.45958-3-clamor95@gmail.com>
On Sun, Jan 25, 2026 at 03:42:54PM +0200, Svyatoslav Ryhel wrote:
> Add support for regulator set used in Motorola Mot board, used as a base
> for Atrix 4G and Droid X2 smartphones.
...
> +static const unsigned int sw_mot_val_tbl[] = { 600000, 612500, 625000,
> + 637500, 650000, 662500,
> + 675000, 687500, 700000,
> + 712500, 725000, 737500,
> + 750000, 762500, 775000,
> + 787500, 800000, 812500,
> + 825000, 837500, 850000,
> + 862500, 875000, 887500,
> + 900000, 912500, 925000,
> + 937500, 950000, 962500,
> + 975000, 987500, 1000000,
> + 1012500, 1025000, 1037500,
> + 1050000, 1062500, 1075000,
> + 1087500, 1100000, 1112500,
> + 1125000, 1137500, 1150000,
> + 1162500, 1175000, 1187500,
> + 1200000, 1212500, 1225000,
> + 1237500, 1250000, 1262500,
> + 1275000, 1287500, 1300000,
> + 1312500, 1325000, 1337500,
> + 1350000, 1362500, 1375000,
> + 1387500, 1400000, 1412500,
> + 1425000, 1437500, 1450000,
> + 1462500, 1475000, };
What a style! (Yeah, I see it's being used elsewhere here...)
...
> + CPCAP_REG(VAUDIO, CPCAP_REG_VAUDIOC, CPCAP_REG_ASSIGN4,
> + CPCAP_BIT_VAUDIO_SEL, vaudio_val_tbl,
> + 0x16, 0x1, 0x5, 0, 0),
> + { /* sentinel */ },
No trailing comma for sentinel.
> +};
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply
* Re: [PATCH 14/21] rtc: amlogic-a4: Remove IRQF_ONESHOT
From: Xianwei Zhao @ 2026-01-26 6:05 UTC (permalink / raw)
To: Sebastian Andrzej Siewior, linux-kernel
Cc: linux-rt-devel, Thomas Gleixner, Yiting Deng, Alexandre Belloni,
linux-amlogic, linux-rtc
In-Reply-To: <20260123113708.416727-15-bigeasy@linutronix.de>
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
On 2026/1/23 19:37, Sebastian Andrzej Siewior wrote:
> [ EXTERNAL EMAIL ]
>
> Passing IRQF_ONESHOT ensures that the interrupt source is masked until
> the secondary (threaded) handler is done. If only a primary handler is
> used then the flag makes no sense because the interrupt can not fire
> (again) while its handler is running.
> The flag also disallows force-threading of the primary handler and the
> irq-core will warn about this.
>
> Remove IRQF_ONESHOT from irqflags.
>
> Cc: Yiting Deng <yiting.deng@amlogic.com>
> Cc: Xianwei Zhao <xianwei.zhao@amlogic.com>
> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
> Cc: linux-amlogic@lists.infradead.org
> Cc: linux-rtc@vger.kernel.org
> Fixes: c89ac9182ee29 ("rtc: support for the Amlogic on-chip RTC")
> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
> ---
> drivers/rtc/rtc-amlogic-a4.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/rtc/rtc-amlogic-a4.c b/drivers/rtc/rtc-amlogic-a4.c
> index 123fb372fc9fe..50938c35af36a 100644
> --- a/drivers/rtc/rtc-amlogic-a4.c
> +++ b/drivers/rtc/rtc-amlogic-a4.c
> @@ -369,7 +369,7 @@ static int aml_rtc_probe(struct platform_device *pdev)
> return PTR_ERR(rtc->rtc_dev);
>
> ret = devm_request_irq(dev, rtc->irq, aml_rtc_handler,
> - IRQF_ONESHOT, "aml-rtc alarm", rtc);
> + 0, "aml-rtc alarm", rtc);
> if (ret) {
> dev_err_probe(dev, ret, "IRQ%d request failed, ret = %d\n",
> rtc->irq, ret);
> --
> 2.51.0
>
^ permalink raw reply
* Re: [PATCH v2 05/12] dt-bindings: mfd: s2mps11: add documentation for S2MU005 PMIC
From: Rob Herring (Arm) @ 2026-01-25 20:59 UTC (permalink / raw)
To: Kaustabh Chakraborty
Cc: Sebastian Reichel, André Draszik, Conor Dooley, Shuah Khan,
Jonathan Corbet, linux-kernel, Krzysztof Kozlowski, linux-pm,
linux-rtc, linux-doc, Alexandre Belloni, linux-samsung-soc,
MyungJoo Ham, Chanwoo Choi, devicetree, linux-leds,
Krzysztof Kozlowski, Lee Jones, Pavel Machek
In-Reply-To: <20260126-s2mu005-pmic-v2-5-78f1a75f547a@disroot.org>
On Mon, 26 Jan 2026 00:37:12 +0530, Kaustabh Chakraborty wrote:
> Samsung's S2MU005 PMIC includes subdevices for a charger, an MUIC (Micro
> USB Interface Controller), and flash and RGB LED controllers.
>
> Since regulators are not supported by this device, unmark this property
> as required and instead set this in a per-device basis for ones which
> need it.
>
> Add the compatible and documentation for the S2MU005 PMIC. Also, add an
> example for nodes for supported sub-devices, i.e. charger, extcon,
> flash, and rgb.
>
> Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
> ---
> .../devicetree/bindings/mfd/samsung,s2mps11.yaml | 103 ++++++++++++++++++++-
> 1 file changed, 102 insertions(+), 1 deletion(-)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml: Unresolvable reference: /schemas/power/supply/samsung,s2m-charger.yaml
Traceback (most recent call last):
File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 428, in get_or_retrieve
resource = registry._retrieve(uri)
File "/usr/local/lib/python3.13/dist-packages/dtschema/validator.py", line 426, in retrieve
return DRAFT201909.create_resource(self.schemas[uri])
~~~~~~~~~~~~^^^^^
KeyError: 'http://devicetree.org/schemas/power/supply/samsung,s2m-charger.yaml'
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 682, in lookup
retrieved = self._registry.get_or_retrieve(uri)
File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 435, in get_or_retrieve
raise exceptions.Unretrievable(ref=uri) from error
referencing.exceptions.Unretrievable: 'http://devicetree.org/schemas/power/supply/samsung,s2m-charger.yaml'
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 462, in _validate_reference
resolved = self._resolver.lookup(ref)
File "/usr/local/lib/python3.13/dist-packages/referencing/_core.py", line 686, in lookup
raise exceptions.Unresolvable(ref=ref) from error
referencing.exceptions.Unresolvable: /schemas/power/supply/samsung,s2m-charger.yaml
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File "/usr/local/bin/dt-validate", line 8, in <module>
sys.exit(main())
~~~~^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 158, in main
sg.check_dtb(filename)
~~~~~~~~~~~~^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 95, in check_dtb
self.check_subtree(dt, subtree, False, "/", "/", filename)
~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 88, in check_subtree
self.check_subtree(tree, value, disabled, name, fullname + name, filename)
~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 88, in check_subtree
self.check_subtree(tree, value, disabled, name, fullname + name, filename)
~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 88, in check_subtree
self.check_subtree(tree, value, disabled, name, fullname + name, filename)
~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 83, in check_subtree
self.check_node(tree, subtree, disabled, nodename, fullname, filename)
~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/dtb_validate.py", line 34, in check_node
for error in self.validator.iter_errors(node, filter=match_schema_file,
~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
compatible_match=compatible_match):
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/dtschema/validator.py", line 448, in iter_errors
for error in self.DtValidator(schema, registry=self.registry).iter_errors(instance):
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 383, in iter_errors
for error in errors:
^^^^^^
File "/usr/local/lib/python3.13/dist-packages/jsonschema/_keywords.py", line 296, in properties
yield from validator.descend(
...<4 lines>...
)
File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 431, in descend
for error in errors:
^^^^^^
File "/usr/local/lib/python3.13/dist-packages/jsonschema/_keywords.py", line 275, in ref
yield from validator._validate_reference(ref=ref, instance=instance)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/usr/local/lib/python3.13/dist-packages/jsonschema/validators.py", line 464, in _validate_reference
raise exceptions._WrappedReferencingError(err) from err
jsonschema.exceptions._WrappedReferencingError: Unresolvable: /schemas/power/supply/samsung,s2m-charger.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.kernel.org/project/devicetree/patch/20260126-s2mu005-pmic-v2-5-78f1a75f547a@disroot.org
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply
* [PATCH 5/5] arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable RTC
From: Ovidiu Panait @ 2026-01-25 19:27 UTC (permalink / raw)
To: claudiu.beznea.uj, alexandre.belloni, robh, krzk+dt, conor+dt,
geert+renesas, magnus.damm, mturquette, sboyd,
prabhakar.mahadev-lad.rj
Cc: linux-rtc, linux-renesas-soc, devicetree, linux-kernel, linux-clk
In-Reply-To: <20260125192706.27099-1-ovidiu.panait.rb@renesas.com>
Enable RTC.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
index 8399f4f705c4..434edccfe71d 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
@@ -471,6 +471,10 @@ &qextal_clk {
clock-frequency = <24000000>;
};
+&rtc {
+ status = "okay";
+};
+
&rtxin_clk {
clock-frequency = <32768>;
};
--
2.51.0
^ permalink raw reply related
* [PATCH 4/5] arm64: dts: renesas: r9a09g056: Add RTC node
From: Ovidiu Panait @ 2026-01-25 19:27 UTC (permalink / raw)
To: claudiu.beznea.uj, alexandre.belloni, robh, krzk+dt, conor+dt,
geert+renesas, magnus.damm, mturquette, sboyd,
prabhakar.mahadev-lad.rj
Cc: linux-rtc, linux-renesas-soc, devicetree, linux-kernel, linux-clk
In-Reply-To: <20260125192706.27099-1-ovidiu.panait.rb@renesas.com>
Add RTC node to Renesas RZ/V2N ("R9A09G056") SoC DTSI.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
arch/arm64/boot/dts/renesas/r9a09g056.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
index 9fb15ca24984..494f0e5a83ab 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
@@ -639,6 +639,21 @@ wdt3: watchdog@13000400 {
status = "disabled";
};
+ rtc: rtc@11c00800 {
+ compatible = "renesas,r9a09g056-rtca3", "renesas,rz-rtca3";
+ reg = <0 0x11c00800 0 0x400>;
+ interrupts = <GIC_SPI 524 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 525 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 526 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "alarm", "period", "carry";
+ clocks = <&cpg CPG_MOD 0x53>, <&rtxin_clk>;
+ clock-names = "bus", "counter";
+ power-domains = <&cpg>;
+ resets = <&cpg 0x79>, <&cpg 0x7a>;
+ reset-names = "rtc", "rtest";
+ status = "disabled";
+ };
+
scif: serial@11c01400 {
compatible = "renesas,scif-r9a09g056",
"renesas,scif-r9a09g057";
--
2.51.0
^ permalink raw reply related
* [PATCH 3/5] dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2N support
From: Ovidiu Panait @ 2026-01-25 19:27 UTC (permalink / raw)
To: claudiu.beznea.uj, alexandre.belloni, robh, krzk+dt, conor+dt,
geert+renesas, magnus.damm, mturquette, sboyd,
prabhakar.mahadev-lad.rj
Cc: linux-rtc, linux-renesas-soc, devicetree, linux-kernel, linux-clk
In-Reply-To: <20260125192706.27099-1-ovidiu.panait.rb@renesas.com>
The Renesas RZ/V2N (r9a09g056) RTC is identical to the RZ/V2H
(r9a09g057) variant. Add the compatible string for RZ/V2N and
extend the existing RZ/V2H reset configuration to cover both
variants.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml b/Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml
index ccb1638c35b9..988bb9fa8143 100644
--- a/Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml
+++ b/Documentation/devicetree/bindings/rtc/renesas,rz-rtca3.yaml
@@ -14,6 +14,7 @@ properties:
items:
- enum:
- renesas,r9a08g045-rtca3 # RZ/G3S
+ - renesas,r9a09g056-rtca3 # RZ/V2N
- renesas,r9a09g057-rtca3 # RZ/V2H
- const: renesas,rz-rtca3
@@ -82,7 +83,9 @@ allOf:
properties:
compatible:
contains:
- const: renesas,r9a09g057-rtca3
+ enum:
+ - renesas,r9a09g056-rtca3
+ - renesas,r9a09g057-rtca3
then:
properties:
resets:
--
2.51.0
^ permalink raw reply related
* [PATCH 2/5] clk: renesas: r9a09g056: Add clock and reset entries for RTC
From: Ovidiu Panait @ 2026-01-25 19:27 UTC (permalink / raw)
To: claudiu.beznea.uj, alexandre.belloni, robh, krzk+dt, conor+dt,
geert+renesas, magnus.damm, mturquette, sboyd,
prabhakar.mahadev-lad.rj
Cc: linux-rtc, linux-renesas-soc, devicetree, linux-kernel, linux-clk
In-Reply-To: <20260125192706.27099-1-ovidiu.panait.rb@renesas.com>
Add module clock and reset entries for the RTC module on the Renesas RZ/V2N
(R9A09G056) SoC.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
drivers/clk/renesas/r9a09g056-cpg.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/clk/renesas/r9a09g056-cpg.c b/drivers/clk/renesas/r9a09g056-cpg.c
index 70de6bb929b9..549c882f9a18 100644
--- a/drivers/clk/renesas/r9a09g056-cpg.c
+++ b/drivers/clk/renesas/r9a09g056-cpg.c
@@ -289,6 +289,8 @@ static const struct rzv2h_mod_clk r9a09g056_mod_clks[] __initconst = {
BUS_MSTOP(5, BIT(13))),
DEF_MOD("wdt_3_clk_loco", CLK_QEXTAL, 5, 2, 2, 18,
BUS_MSTOP(5, BIT(13))),
+ DEF_MOD("rtc_0_clk_rtc", CLK_PLLCM33_DIV16, 5, 3, 2, 19,
+ BUS_MSTOP(3, BIT(11) | BIT(12))),
DEF_MOD("rspi_0_pclk", CLK_PLLCLN_DIV8, 5, 4, 2, 20,
BUS_MSTOP(11, BIT(0))),
DEF_MOD("rspi_0_pclk_sfr", CLK_PLLCLN_DIV8, 5, 5, 2, 21,
@@ -593,6 +595,8 @@ static const struct rzv2h_reset r9a09g056_resets[] __initconst = {
DEF_RST(9, 2, 4, 3), /* RSCI8_TRESETN */
DEF_RST(9, 3, 4, 4), /* RSCI9_PRESETN */
DEF_RST(9, 4, 4, 5), /* RSCI9_TRESETN */
+ DEF_RST(7, 9, 3, 10), /* RTC_0_RST_RTC */
+ DEF_RST(7, 10, 3, 11), /* RTC_0_RST_RTC_V */
DEF_RST(7, 11, 3, 12), /* RSPI_0_PRESETN */
DEF_RST(7, 12, 3, 13), /* RSPI_0_TRESETN */
DEF_RST(7, 13, 3, 14), /* RSPI_1_PRESETN */
--
2.51.0
^ permalink raw reply related
* [PATCH 1/5] clk: renesas: r9a09g056: Fix ordering of module clocks array
From: Ovidiu Panait @ 2026-01-25 19:27 UTC (permalink / raw)
To: claudiu.beznea.uj, alexandre.belloni, robh, krzk+dt, conor+dt,
geert+renesas, magnus.damm, mturquette, sboyd,
prabhakar.mahadev-lad.rj
Cc: linux-rtc, linux-renesas-soc, devicetree, linux-kernel, linux-clk
In-Reply-To: <20260125192706.27099-1-ovidiu.panait.rb@renesas.com>
The r9a09g056_mod_clks array is sorted by CPG_CLKON register number and
bit position. Move the RSPI 0/1/2 module clock entries to their correct
position to restore the array sort order.
Fixes: 1f76689d1715 ("clk: renesas: r9a09g056: Add entries for RSCIs")
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
---
drivers/clk/renesas/r9a09g056-cpg.c | 36 ++++++++++++++---------------
1 file changed, 18 insertions(+), 18 deletions(-)
diff --git a/drivers/clk/renesas/r9a09g056-cpg.c b/drivers/clk/renesas/r9a09g056-cpg.c
index fead173cae8b..70de6bb929b9 100644
--- a/drivers/clk/renesas/r9a09g056-cpg.c
+++ b/drivers/clk/renesas/r9a09g056-cpg.c
@@ -289,6 +289,24 @@ static const struct rzv2h_mod_clk r9a09g056_mod_clks[] __initconst = {
BUS_MSTOP(5, BIT(13))),
DEF_MOD("wdt_3_clk_loco", CLK_QEXTAL, 5, 2, 2, 18,
BUS_MSTOP(5, BIT(13))),
+ DEF_MOD("rspi_0_pclk", CLK_PLLCLN_DIV8, 5, 4, 2, 20,
+ BUS_MSTOP(11, BIT(0))),
+ DEF_MOD("rspi_0_pclk_sfr", CLK_PLLCLN_DIV8, 5, 5, 2, 21,
+ BUS_MSTOP(11, BIT(0))),
+ DEF_MOD("rspi_0_tclk", CLK_PLLCLN_DIV8, 5, 6, 2, 22,
+ BUS_MSTOP(11, BIT(0))),
+ DEF_MOD("rspi_1_pclk", CLK_PLLCLN_DIV8, 5, 7, 2, 23,
+ BUS_MSTOP(11, BIT(1))),
+ DEF_MOD("rspi_1_pclk_sfr", CLK_PLLCLN_DIV8, 5, 8, 2, 24,
+ BUS_MSTOP(11, BIT(1))),
+ DEF_MOD("rspi_1_tclk", CLK_PLLCLN_DIV8, 5, 9, 2, 25,
+ BUS_MSTOP(11, BIT(1))),
+ DEF_MOD("rspi_2_pclk", CLK_PLLCLN_DIV8, 5, 10, 2, 26,
+ BUS_MSTOP(11, BIT(2))),
+ DEF_MOD("rspi_2_pclk_sfr", CLK_PLLCLN_DIV8, 5, 11, 2, 27,
+ BUS_MSTOP(11, BIT(2))),
+ DEF_MOD("rspi_2_tclk", CLK_PLLCLN_DIV8, 5, 12, 2, 28,
+ BUS_MSTOP(11, BIT(2))),
DEF_MOD("rsci0_pclk", CLK_PLLCLN_DIV16, 5, 13, 2, 29,
BUS_MSTOP(11, BIT(3))),
DEF_MOD("rsci0_tclk", CLK_PLLCLN_DIV16, 5, 14, 2, 30,
@@ -389,24 +407,6 @@ static const struct rzv2h_mod_clk r9a09g056_mod_clks[] __initconst = {
BUS_MSTOP(11, BIT(12))),
DEF_MOD("rsci9_ps_ps1_n", CLK_PLLCLN_DIV64, 8, 14, 4, 14,
BUS_MSTOP(11, BIT(12))),
- DEF_MOD("rspi_0_pclk", CLK_PLLCLN_DIV8, 5, 4, 2, 20,
- BUS_MSTOP(11, BIT(0))),
- DEF_MOD("rspi_0_pclk_sfr", CLK_PLLCLN_DIV8, 5, 5, 2, 21,
- BUS_MSTOP(11, BIT(0))),
- DEF_MOD("rspi_0_tclk", CLK_PLLCLN_DIV8, 5, 6, 2, 22,
- BUS_MSTOP(11, BIT(0))),
- DEF_MOD("rspi_1_pclk", CLK_PLLCLN_DIV8, 5, 7, 2, 23,
- BUS_MSTOP(11, BIT(1))),
- DEF_MOD("rspi_1_pclk_sfr", CLK_PLLCLN_DIV8, 5, 8, 2, 24,
- BUS_MSTOP(11, BIT(1))),
- DEF_MOD("rspi_1_tclk", CLK_PLLCLN_DIV8, 5, 9, 2, 25,
- BUS_MSTOP(11, BIT(1))),
- DEF_MOD("rspi_2_pclk", CLK_PLLCLN_DIV8, 5, 10, 2, 26,
- BUS_MSTOP(11, BIT(2))),
- DEF_MOD("rspi_2_pclk_sfr", CLK_PLLCLN_DIV8, 5, 11, 2, 27,
- BUS_MSTOP(11, BIT(2))),
- DEF_MOD("rspi_2_tclk", CLK_PLLCLN_DIV8, 5, 12, 2, 28,
- BUS_MSTOP(11, BIT(2))),
DEF_MOD("scif_0_clk_pck", CLK_PLLCM33_DIV16, 8, 15, 4, 15,
BUS_MSTOP(3, BIT(14))),
DEF_MOD("i3c_0_pclkrw", CLK_PLLCLN_DIV16, 9, 0, 4, 16,
--
2.51.0
^ permalink raw reply related
* [PATCH 0/5] Add RTC support for the Renesas RZ/V2N SoC
From: Ovidiu Panait @ 2026-01-25 19:27 UTC (permalink / raw)
To: claudiu.beznea.uj, alexandre.belloni, robh, krzk+dt, conor+dt,
geert+renesas, magnus.damm, mturquette, sboyd,
prabhakar.mahadev-lad.rj
Cc: linux-rtc, linux-renesas-soc, devicetree, linux-kernel, linux-clk
Hi,
This series adds RTC support for the Renesas RZ/V2N SoC.
The Renesas RZ/V2N RTC IP is identical to the IP found on the RZ/V2H
SoC. This series updates the bindings and the SoC/board dts files.
Best regards,
Ovidiu
Ovidiu Panait (5):
clk: renesas: r9a09g056: Fix ordering of module clocks array
clk: renesas: r9a09g056: Add clock and reset entries for RTC
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2N support
arm64: dts: renesas: r9a09g056: Add RTC node
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable RTC
.../bindings/rtc/renesas,rz-rtca3.yaml | 5 ++-
arch/arm64/boot/dts/renesas/r9a09g056.dtsi | 15 +++++++
.../dts/renesas/r9a09g056n48-rzv2n-evk.dts | 4 ++
drivers/clk/renesas/r9a09g056-cpg.c | 40 ++++++++++---------
4 files changed, 45 insertions(+), 19 deletions(-)
--
2.51.0
^ permalink raw reply
* [PATCH v2 12/12] power: supply: add support for Samsung S2M series PMIC charger device
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty
In-Reply-To: <20260126-s2mu005-pmic-v2-0-78f1a75f547a@disroot.org>
Add a driver for charger controllers found in certain Samsung S2M series
PMICs. The driver has very basic support for the device, with only
charger online reporting working.
The driver includes initial support for the S2MU005 PMIC charger.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
drivers/power/supply/Kconfig | 11 ++
drivers/power/supply/Makefile | 1 +
drivers/power/supply/s2m-charger.c | 213 +++++++++++++++++++++++++++++++++++++
3 files changed, 225 insertions(+)
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 92f9f7aae92f2..b9a6bdf014586 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -229,6 +229,17 @@ config BATTERY_SAMSUNG_SDI
Say Y to enable support for Samsung SDI battery data.
These batteries are used in Samsung mobile phones.
+config CHARGER_S2M
+ tristate "Samsung S2M series PMIC battery charger support"
+ depends on EXTCON_S2M
+ depends on MFD_SEC_CORE
+ select REGMAP_IRQ
+ help
+ This option enables support for charger devices found in
+ certain Samsung S2M series PMICs, such as the S2MU005. These
+ devices provide USB power supply information and also required
+ for USB OTG role switching.
+
config BATTERY_COLLIE
tristate "Sharp SL-5500 (collie) battery"
depends on SA1100_COLLIE && MCP_UCB1200
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 4b79d5abc49a7..795ef40d95311 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -40,6 +40,7 @@ obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_QCOM_BATTMGR) += qcom_battmgr.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
obj-$(CONFIG_BATTERY_SAMSUNG_SDI) += samsung-sdi-battery.o
+obj-$(CONFIG_CHARGER_S2M) += s2m-charger.o
obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
obj-$(CONFIG_BATTERY_INGENIC) += ingenic-battery.o
obj-$(CONFIG_BATTERY_INTEL_DC_TI) += intel_dc_ti_battery.o
diff --git a/drivers/power/supply/s2m-charger.c b/drivers/power/supply/s2m-charger.c
new file mode 100644
index 0000000000000..c212bc59f93cc
--- /dev/null
+++ b/drivers/power/supply/s2m-charger.c
@@ -0,0 +1,213 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Battery Charger Driver for Samsung S2M series PMICs.
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#include <linux/devm-helpers.h>
+#include <linux/extcon.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/mfd/samsung/s2mu005.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+struct s2m_chgr {
+ struct device *dev;
+ struct regmap *regmap;
+ struct power_supply *psy;
+ struct extcon_dev *extcon;
+ struct work_struct extcon_work;
+ struct notifier_block extcon_nb;
+};
+
+static int s2mu005_chgr_get_online(struct s2m_chgr *priv, int *value)
+{
+ u32 val;
+ int ret = 0;
+
+ ret = regmap_read(priv->regmap, S2MU005_REG_CHGR_STATUS0, &val);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to read register (%d)\n", ret);
+ return ret;
+ }
+
+ *value = !!(val & S2MU005_CHGR_CHG);
+
+ return ret;
+}
+
+static int s2mu005_chgr_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct s2m_chgr *priv = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = s2mu005_chgr_get_online(priv, &val->intval);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static void s2mu005_chgr_extcon_work(struct work_struct *work)
+{
+ struct s2m_chgr *priv = container_of(work, struct s2m_chgr,
+ extcon_work);
+ int ret;
+
+ if (extcon_get_state(priv->extcon, EXTCON_USB_HOST) == true) {
+ ret = regmap_update_bits(priv->regmap, S2MU005_REG_CHGR_CTRL0,
+ S2MU005_CHGR_OP_MODE,
+ S2MU005_CHGR_OP_MODE_OTG);
+ if (ret < 0)
+ dev_err(priv->dev, "failed to set operation mode to OTG (%d)\n",
+ ret);
+
+ goto psy_update;
+ }
+
+ if (extcon_get_state(priv->extcon, EXTCON_USB) == true) {
+ ret = regmap_update_bits(priv->regmap, S2MU005_REG_CHGR_CTRL0,
+ S2MU005_CHGR_OP_MODE,
+ S2MU005_CHGR_OP_MODE_CHG);
+ if (ret < 0)
+ dev_err(priv->dev, "failed to set operation mode to charging (%d)\n",
+ ret);
+
+ goto psy_update;
+ }
+
+ ret = regmap_clear_bits(priv->regmap, S2MU005_REG_CHGR_CTRL0,
+ S2MU005_CHGR_OP_MODE);
+ if (ret < 0)
+ dev_err(priv->dev, "failed to clear operation mode (%d)\n", ret);
+
+psy_update:
+ power_supply_changed(priv->psy);
+}
+
+static const enum power_supply_property s2mu005_chgr_properties[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc s2mu005_chgr_psy_desc = {
+ .name = "s2mu005-charger",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = s2mu005_chgr_properties,
+ .num_properties = ARRAY_SIZE(s2mu005_chgr_properties),
+ .get_property = s2mu005_chgr_get_property,
+};
+
+static int s2m_chgr_extcon_notifier(struct notifier_block *nb,
+ unsigned long event, void *param)
+{
+ struct s2m_chgr *priv = container_of(nb, struct s2m_chgr, extcon_nb);
+
+ schedule_work(&priv->extcon_work);
+
+ return NOTIFY_OK;
+}
+
+static int s2m_chgr_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sec_pmic_dev *pmic_drvdata = dev_get_drvdata(dev->parent);
+ struct s2m_chgr *priv;
+ struct device_node *extcon_node;
+ struct power_supply_config psy_cfg = {};
+ const struct power_supply_desc *psy_desc;
+ work_func_t extcon_work_func;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return dev_err_probe(dev, -ENOMEM, "failed to allocate driver private\n");
+
+ platform_set_drvdata(pdev, priv);
+ priv->dev = dev;
+ priv->regmap = pmic_drvdata->regmap_pmic;
+
+ switch (platform_get_device_id(pdev)->driver_data) {
+ case S2MU005:
+ psy_desc = &s2mu005_chgr_psy_desc;
+ extcon_work_func = s2mu005_chgr_extcon_work;
+ break;
+ default:
+ return dev_err_probe(dev, -ENODEV,
+ "device type %d is not supported by driver\n",
+ pmic_drvdata->device_type);
+ }
+
+ psy_cfg.drv_data = priv;
+ priv->psy = devm_power_supply_register(dev, psy_desc, &psy_cfg);
+ if (IS_ERR(priv->psy))
+ return dev_err_probe(dev, PTR_ERR(priv->psy),
+ "failed to register power supply subsystem\n");
+
+ /* MUIC is mandatory. If unavailable, request probe deferral */
+ extcon_node = of_get_child_by_name(dev->parent->of_node, "extcon");
+ priv->extcon = extcon_find_edev_by_node(extcon_node);
+ if (IS_ERR(priv->extcon))
+ return -EPROBE_DEFER;
+
+ ret = devm_work_autocancel(dev, &priv->extcon_work, extcon_work_func);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to initialize extcon work\n");
+
+ priv->extcon_nb.notifier_call = s2m_chgr_extcon_notifier;
+ ret = devm_extcon_register_notifier_all(dev, priv->extcon, &priv->extcon_nb);
+ if (ret)
+ dev_err_probe(dev, ret, "failed to register extcon notifier\n");
+
+ return 0;
+}
+
+static const struct platform_device_id s2m_chgr_id_table[] = {
+ { "s2mu005-charger", S2MU005 },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, s2m_chgr_id_table);
+
+#ifdef CONFIG_OF
+/*
+ * Device is instantiated through parent MFD device and device matching
+ * is done through platform_device_id.
+ *
+ * However if device's DT node contains proper compatible and driver is
+ * built as a module, then the *module* matching will be done through DT
+ * aliases. This requires of_device_id table. In the same time this will
+ * not change the actual *device* matching so do not add .of_match_table.
+ */
+static const struct of_device_id s2m_chgr_of_match_table[] = {
+ {
+ .compatible = "samsung,s2mu005-charger",
+ .data = (void *)S2MU005,
+ }, {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, s2m_chgr_of_match_table);
+#endif
+
+static struct platform_driver s2m_chgr_driver = {
+ .driver = {
+ .name = "s2m-charger",
+ },
+ .probe = s2m_chgr_probe,
+ .id_table = s2m_chgr_id_table,
+};
+module_platform_driver(s2m_chgr_driver);
+
+MODULE_DESCRIPTION("Battery Charger Driver For Samsung S2M Series PMICs");
+MODULE_AUTHOR("Kaustabh Chakraborty <kauschluss@disroot.org>");
+MODULE_LICENSE("GPL");
--
2.52.0
^ permalink raw reply related
* [PATCH v2 11/12] extcon: add support for Samsung S2M series PMIC extcon devices
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty
In-Reply-To: <20260126-s2mu005-pmic-v2-0-78f1a75f547a@disroot.org>
Add a driver for MUIC devices found in certain Samsung S2M series PMICs
These are USB port accessory detectors. These devices report multiple
cable states depending on the ID-GND resistance measured by an internal
ADC.
The driver includes initial support for the S2MU005 PMIC extcon.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
drivers/extcon/Kconfig | 10 ++
drivers/extcon/Makefile | 1 +
drivers/extcon/extcon-s2m.c | 351 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 362 insertions(+)
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index 68d9df7d2dae0..19c712e591955 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -183,6 +183,16 @@ config EXTCON_RT8973A
and switch that is optimized to protect low voltage system
from abnormal high input voltage (up to 28V).
+config EXTCON_S2M
+ tristate "Samsung S2M series PMIC EXTCON support"
+ depends on MFD_SEC_CORE
+ select REGMAP_IRQ
+ help
+ This option enables support for MUIC devices found in certain
+ Samsung S2M series PMICs, such as the S2MU005. These devices
+ have internal ADCs measuring the ID-GND resistance, thereby
+ can be used as a USB port accessory detector.
+
config EXTCON_SM5502
tristate "Silicon Mitus SM5502/SM5504/SM5703 EXTCON support"
depends on I2C
diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile
index 6482f2bfd6611..e3939786f3474 100644
--- a/drivers/extcon/Makefile
+++ b/drivers/extcon/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_EXTCON_PALMAS) += extcon-palmas.o
obj-$(CONFIG_EXTCON_PTN5150) += extcon-ptn5150.o
obj-$(CONFIG_EXTCON_QCOM_SPMI_MISC) += extcon-qcom-spmi-misc.o
obj-$(CONFIG_EXTCON_RT8973A) += extcon-rt8973a.o
+obj-$(CONFIG_EXTCON_S2M) += extcon-s2m.o
obj-$(CONFIG_EXTCON_SM5502) += extcon-sm5502.o
obj-$(CONFIG_EXTCON_USB_GPIO) += extcon-usb-gpio.o
obj-$(CONFIG_EXTCON_USBC_CROS_EC) += extcon-usbc-cros-ec.o
diff --git a/drivers/extcon/extcon-s2m.c b/drivers/extcon/extcon-s2m.c
new file mode 100644
index 0000000000000..7a49e8e54f439
--- /dev/null
+++ b/drivers/extcon/extcon-s2m.c
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Extcon Driver for Samsung S2M series PMICs.
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd
+ * Copyright (C) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#include <linux/delay.h>
+#include <linux/extcon-provider.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/mfd/samsung/s2mu005.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct s2m_muic {
+ struct device *dev;
+ struct regmap *regmap;
+ struct extcon_dev *extcon;
+ struct s2m_muic_irq_data *irq_data;
+ const unsigned int *extcon_cable;
+ bool attached;
+};
+
+struct s2m_muic_irq_data {
+ const char *name;
+ int (*const handler)(struct s2m_muic *);
+ int irq;
+};
+
+static int s2mu005_muic_detach(struct s2m_muic *priv)
+{
+ int ret;
+ int i;
+
+ ret = regmap_set_bits(priv->regmap, S2MU005_REG_MUIC_CTRL1,
+ S2MU005_MUIC_MAN_SW);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to disable manual switching\n");
+ return ret;
+ }
+
+ ret = regmap_set_bits(priv->regmap, S2MU005_REG_MUIC_CTRL3,
+ S2MU005_MUIC_ONESHOT_ADC);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to enable ADC oneshot mode\n");
+ return ret;
+ }
+
+ ret = regmap_clear_bits(priv->regmap, S2MU005_REG_MUIC_SWCTRL, ~0);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to clear switch control register\n");
+ return ret;
+ }
+
+ /* Find all set states and clear them */
+ for (i = 0; priv->extcon_cable[i]; i++) {
+ unsigned int state = priv->extcon_cable[i];
+
+ if (extcon_get_state(priv->extcon, state) == true)
+ extcon_set_state_sync(priv->extcon, state, false);
+ }
+
+ priv->attached = false;
+
+ return 0;
+}
+
+static int s2mu005_muic_attach(struct s2m_muic *priv)
+{
+ unsigned int type;
+ int ret;
+
+ /* If any device is already attached, detach it */
+ if (priv->attached) {
+ s2mu005_muic_detach(priv);
+ msleep(100);
+ }
+
+ ret = regmap_read(priv->regmap, S2MU005_REG_MUIC_DEV1, &type);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to read DEV1 register\n");
+ return ret;
+ }
+
+ /*
+ * All USB connections which require communication via its D+
+ * and D- wires need it.
+ */
+ if (type & (S2MU005_MUIC_OTG | S2MU005_MUIC_DCP | S2MU005_MUIC_SDP)) {
+ ret = regmap_update_bits(priv->regmap, S2MU005_REG_MUIC_SWCTRL,
+ S2MU005_MUIC_DM_DP,
+ S2MU005_MUIC_DM_DP_USB);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to configure DM/DP pins\n");
+ return ret;
+ }
+ }
+
+ /*
+ * For OTG connections, enable manual switching and ADC oneshot
+ * mode. Since the port will now be supplying power, the
+ * internal ADC (measuring the ID-GND resistance) is made to
+ * poll periodically for any changes, so as to prevent any
+ * damages due to power.
+ */
+ if (type & S2MU005_MUIC_OTG) {
+ ret = regmap_clear_bits(priv->regmap, S2MU005_REG_MUIC_CTRL1,
+ S2MU005_MUIC_MAN_SW);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to enable manual switching\n");
+ return ret;
+ }
+
+ ret = regmap_clear_bits(priv->regmap, S2MU005_REG_MUIC_CTRL3,
+ S2MU005_MUIC_ONESHOT_ADC);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to disable ADC oneshot mode\n");
+ return ret;
+ }
+ }
+
+ switch (type) {
+ case S2MU005_MUIC_OTG:
+ dev_dbg(priv->dev, "USB OTG connection detected\n");
+ extcon_set_state_sync(priv->extcon, EXTCON_USB_HOST, true);
+ priv->attached = true;
+ break;
+ case S2MU005_MUIC_CDP:
+ dev_dbg(priv->dev, "USB CDP connection detected\n");
+ extcon_set_state_sync(priv->extcon, EXTCON_USB, true);
+ extcon_set_state_sync(priv->extcon, EXTCON_CHG_USB_CDP, true);
+ priv->attached = true;
+ break;
+ case S2MU005_MUIC_SDP:
+ dev_dbg(priv->dev, "USB SDP connection detected\n");
+ extcon_set_state_sync(priv->extcon, EXTCON_USB, true);
+ extcon_set_state_sync(priv->extcon, EXTCON_CHG_USB_SDP, true);
+ priv->attached = true;
+ break;
+ case S2MU005_MUIC_DCP:
+ dev_dbg(priv->dev, "USB DCP connection detected\n");
+ extcon_set_state_sync(priv->extcon, EXTCON_USB, true);
+ extcon_set_state_sync(priv->extcon, EXTCON_CHG_USB_DCP, true);
+ priv->attached = true;
+ break;
+ case S2MU005_MUIC_UART:
+ dev_dbg(priv->dev, "UART connection detected\n");
+ extcon_set_state_sync(priv->extcon, EXTCON_JIG, true);
+ priv->attached = true;
+ break;
+ }
+
+ if (!priv->attached)
+ dev_warn(priv->dev, "failed to recognize the device attached\n");
+
+ return ret;
+}
+
+static int s2mu005_muic_init(struct s2m_muic *priv)
+{
+ int ret = 0;
+
+ ret = regmap_update_bits(priv->regmap, S2MU005_REG_MUIC_LDOADC_L,
+ S2MU005_MUIC_VSET, S2MU005_MUIC_VSET_3P0V);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to set internal ADC voltage regulator\n");
+ return ret;
+ }
+
+ ret = regmap_update_bits(priv->regmap, S2MU005_REG_MUIC_LDOADC_H,
+ S2MU005_MUIC_VSET, S2MU005_MUIC_VSET_3P0V);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to set internal ADC voltage regulator\n");
+ return ret;
+ }
+
+ ret = regmap_clear_bits(priv->regmap, S2MU005_REG_MUIC_CTRL1,
+ S2MU005_MUIC_IRQ);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to enable MUIC interrupts\n");
+ return ret;
+ }
+
+ return s2mu005_muic_attach(priv);
+}
+
+static const unsigned int s2mu005_muic_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_CHG_USB_SDP,
+ EXTCON_CHG_USB_DCP,
+ EXTCON_CHG_USB_CDP,
+ EXTCON_JIG,
+ EXTCON_NONE,
+};
+
+static struct s2m_muic_irq_data s2mu005_muic_irq_data[] = {
+ {
+ .name = "attach",
+ .handler = s2mu005_muic_attach
+ }, {
+ .name = "detach",
+ .handler = s2mu005_muic_detach
+ }, {
+ /* sentinel */
+ }
+};
+
+static irqreturn_t s2m_muic_irq_func(int virq, void *data)
+{
+ struct s2m_muic *priv = data;
+ const struct s2m_muic_irq_data *irq_data = priv->irq_data;
+ int ret;
+ int i;
+
+ for (i = 0; irq_data[i].handler; i++) {
+ if (virq != irq_data[i].irq)
+ continue;
+
+ ret = irq_data[i].handler(priv);
+ if (ret < 0)
+ dev_err(priv->dev, "failed to handle interrupt for %s (%d)\n",
+ irq_data[i].name, ret);
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int s2m_muic_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sec_pmic_dev *pmic_drvdata = dev_get_drvdata(dev->parent);
+ struct s2m_muic *priv;
+ int ret;
+ int i;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return dev_err_probe(dev, -ENOMEM, "failed to allocate driver private\n");
+
+ platform_set_drvdata(pdev, priv);
+ priv->dev = dev;
+ priv->regmap = pmic_drvdata->regmap_pmic;
+
+ switch (platform_get_device_id(pdev)->driver_data) {
+ case S2MU005:
+ priv->extcon_cable = s2mu005_muic_extcon_cable;
+ priv->irq_data = s2mu005_muic_irq_data;
+ /* Initialize MUIC */
+ ret = s2mu005_muic_init(priv);
+ break;
+ default:
+ return dev_err_probe(dev, -ENODEV,
+ "device type %d is not supported by driver\n",
+ pmic_drvdata->device_type);
+ }
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to initialize MUIC\n");
+
+ priv->extcon = devm_extcon_dev_allocate(&pdev->dev, priv->extcon_cable);
+ if (IS_ERR(priv->extcon))
+ return dev_err_probe(dev, PTR_ERR(priv->extcon),
+ "failed to allocate memory for extcon\n");
+
+ ret = devm_extcon_dev_register(dev, priv->extcon);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to register extcon device\n");
+
+ for (i = 0; priv->irq_data[i].handler; i++) {
+ int irq = platform_get_irq_byname_optional(pdev,
+ priv->irq_data[i].name);
+ if (irq == -ENXIO)
+ continue;
+ if (irq <= 0)
+ return dev_err_probe(dev, -EINVAL, "failed to get IRQ %s\n",
+ priv->irq_data[i].name);
+
+ priv->irq_data[i].irq = irq;
+ ret = devm_request_threaded_irq(dev, irq, NULL,
+ s2m_muic_irq_func, IRQF_ONESHOT,
+ priv->irq_data[i].name, priv);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to request IRQ\n");
+ }
+
+ return 0;
+}
+
+static void s2m_muic_remove(struct platform_device *pdev)
+{
+ struct s2m_muic *priv = dev_get_drvdata(&pdev->dev);
+
+ /*
+ * Disabling the MUIC device is important as it disables manual
+ * switching mode, thereby enabling auto switching mode.
+ *
+ * This is to ensure that when the board is powered off, it
+ * goes into LPM charging mode when a USB charger is connected.
+ */
+ switch (platform_get_device_id(pdev)->driver_data) {
+ case S2MU005:
+ s2mu005_muic_detach(priv);
+ break;
+ }
+}
+
+static const struct platform_device_id s2m_muic_id_table[] = {
+ { "s2mu005-muic", S2MU005 },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, s2m_muic_id_table);
+
+#ifdef CONFIG_OF
+/*
+ * Device is instantiated through parent MFD device and device matching
+ * is done through platform_device_id.
+ *
+ * However if device's DT node contains proper compatible and driver is
+ * built as a module, then the *module* matching will be done through DT
+ * aliases. This requires of_device_id table. In the same time this will
+ * not change the actual *device* matching so do not add .of_match_table.
+ */
+static const struct of_device_id s2m_muic_of_match_table[] = {
+ {
+ .compatible = "samsung,s2mu005-muic",
+ .data = (void *)S2MU005,
+ }, {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, s2m_muic_of_match_table);
+#endif
+
+static struct platform_driver s2m_muic_driver = {
+ .driver = {
+ .name = "s2m-muic",
+ },
+ .probe = s2m_muic_probe,
+ .remove = s2m_muic_remove,
+ .id_table = s2m_muic_id_table,
+};
+module_platform_driver(s2m_muic_driver);
+
+MODULE_DESCRIPTION("Extcon Driver For Samsung S2M Series PMICs");
+MODULE_AUTHOR("Kaustabh Chakraborty <kauschluss@disroot.org>");
+MODULE_LICENSE("GPL");
--
2.52.0
^ permalink raw reply related
* [PATCH v2 10/12] Documentation: leds: document pattern behavior of Samsung S2M series PMIC RGB LEDs
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty
In-Reply-To: <20260126-s2mu005-pmic-v2-0-78f1a75f547a@disroot.org>
Add documentation to describe how hardware patterns (as defined by the
documentation of led-class-multicolor) are parsed and implemented by the
Samsung S2M series PMIC RGB LED driver.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
Documentation/leds/index.rst | 1 +
Documentation/leds/leds-s2m-rgb.rst | 60 +++++++++++++++++++++++++++++++++++++
2 files changed, 61 insertions(+)
diff --git a/Documentation/leds/index.rst b/Documentation/leds/index.rst
index 76fae171039c6..05d8e8517a807 100644
--- a/Documentation/leds/index.rst
+++ b/Documentation/leds/index.rst
@@ -27,6 +27,7 @@ LEDs
leds-lp55xx
leds-mlxcpld
leds-mt6370-rgb
+ leds-s2m-rgb
leds-sc27xx
leds-st1202
leds-qcom-lpg
diff --git a/Documentation/leds/leds-s2m-rgb.rst b/Documentation/leds/leds-s2m-rgb.rst
new file mode 100644
index 0000000000000..4f89a8c89ea86
--- /dev/null
+++ b/Documentation/leds/leds-s2m-rgb.rst
@@ -0,0 +1,60 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+Samsung S2M Series PMIC RGB LED Driver
+======================================
+
+Description
+-----------
+
+The RGB LED on the S2M series PMIC hardware features a three-channel LED that
+is grouped together as a single device. Furthermore, it supports 8-bit
+brightness control for each channel. This LED is typically used as a status
+indicator in mobile devices. It also supports various parameters for hardware
+patterns.
+
+The hardware pattern can be programmed using the "pattern" trigger, using the
+hw_pattern attribute.
+
+/sys/class/leds/<led>/repeat
+----------------------------
+
+The hardware supports only indefinitely repeating patterns. The repeat
+attribute must be set to -1 for hardware patterns to function.
+
+/sys/class/leds/<led>/hw_pattern
+--------------------------------
+
+Specify a hardware pattern for the RGB LEDs.
+
+The pattern is a series of brightness levels and durations in milliseconds.
+There should be only one non-zero brightness level. Unlike the results
+described in leds-trigger-pattern, the transitions between on and off states
+are smoothed out by the hardware.
+
+Simple pattern::
+
+ "255 3000 0 1000"
+
+ 255 -+ ''''''-. .-'''''''-.
+ | '. .' '.
+ | \ / \
+ | '. .' '.
+ | '-.......-' '-
+ 0 -+-------+-------+-------+-------+-------+-------+--> time (s)
+ 0 1 2 3 4 5 6
+
+As described in leds-trigger-pattern, it is also possible to use zero-length
+entries to disable the ramping mechanism.
+
+On-Off pattern::
+
+ "255 1000 255 0 0 1000 0 0"
+
+ 255 -+ ------+ +-------+ +-------+
+ | | | | | |
+ | | | | | |
+ | | | | | |
+ | +-------+ +-------+ +-------
+ 0 -+-------+-------+-------+-------+-------+-------+--> time (s)
+ 0 1 2 3 4 5 6
--
2.52.0
^ permalink raw reply related
* [PATCH v2 09/12] leds: rgb: add support for Samsung S2M series PMIC RGB LED device
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty
In-Reply-To: <20260126-s2mu005-pmic-v2-0-78f1a75f547a@disroot.org>
Add support for the RGB LEDs found in certain Samsung S2M series PMICs.
The device has three LED channels, controlled as a single device. These
LEDs are typically used as status indicators in mobile phones.
The driver includes initial support for the S2MU005 PMIC RGB LEDs.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
drivers/leds/rgb/Kconfig | 11 +
drivers/leds/rgb/Makefile | 1 +
drivers/leds/rgb/leds-s2m-rgb.c | 460 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 472 insertions(+)
diff --git a/drivers/leds/rgb/Kconfig b/drivers/leds/rgb/Kconfig
index 222d943d826aa..e38ba1bd434e9 100644
--- a/drivers/leds/rgb/Kconfig
+++ b/drivers/leds/rgb/Kconfig
@@ -62,6 +62,17 @@ config LEDS_QCOM_LPG
If compiled as a module, the module will be named leds-qcom-lpg.
+config LEDS_S2M_RGB
+ tristate "Samsung S2M series PMICs RGB LED support"
+ depends on LEDS_CLASS
+ depends on MFD_SEC_CORE
+ select REGMAP_IRQ
+ help
+ This option enables support for the S2MU005 RGB LEDs. These
+ devices have three LED channels, with 8-bit brightness control
+ for each channel. It's usually found in mobile phones as
+ status indicators.
+
config LEDS_MT6370_RGB
tristate "LED Support for MediaTek MT6370 PMIC"
depends on MFD_MT6370
diff --git a/drivers/leds/rgb/Makefile b/drivers/leds/rgb/Makefile
index a501fd27f1793..fc9d38fa60e1d 100644
--- a/drivers/leds/rgb/Makefile
+++ b/drivers/leds/rgb/Makefile
@@ -5,4 +5,5 @@ obj-$(CONFIG_LEDS_KTD202X) += leds-ktd202x.o
obj-$(CONFIG_LEDS_NCP5623) += leds-ncp5623.o
obj-$(CONFIG_LEDS_PWM_MULTICOLOR) += leds-pwm-multicolor.o
obj-$(CONFIG_LEDS_QCOM_LPG) += leds-qcom-lpg.o
+obj-$(CONFIG_LEDS_S2M_RGB) += leds-s2m-rgb.o
obj-$(CONFIG_LEDS_MT6370_RGB) += leds-mt6370-rgb.o
diff --git a/drivers/leds/rgb/leds-s2m-rgb.c b/drivers/leds/rgb/leds-s2m-rgb.c
new file mode 100644
index 0000000000000..dd304be6c65c8
--- /dev/null
+++ b/drivers/leds/rgb/leds-s2m-rgb.c
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RGB LED Driver for Samsung S2M series PMICs.
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#include <linux/container_of.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/mfd/samsung/s2mu005.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+struct s2m_rgb {
+ struct device *dev;
+ struct regmap *regmap;
+ struct led_classdev_mc cdev;
+ struct mutex lock;
+ const struct s2m_rgb_spec *spec;
+ u8 ramp_up;
+ u8 ramp_dn;
+ u8 stay_hi;
+ u8 stay_lo;
+};
+
+struct s2m_rgb_spec {
+ int (*params_apply)(struct s2m_rgb *priv);
+ int (*params_reset)(struct s2m_rgb *priv);
+ const u32 *lut_ramp_up;
+ const size_t lut_ramp_up_len;
+ const u32 *lut_ramp_dn;
+ const size_t lut_ramp_dn_len;
+ const u32 *lut_stay_hi;
+ const size_t lut_stay_hi_len;
+ const u32 *lut_stay_lo;
+ const size_t lut_stay_lo_len;
+ const unsigned int max_brightness;
+};
+
+static struct led_classdev_mc *to_cdev_mc(struct led_classdev *cdev)
+{
+ return container_of(cdev, struct led_classdev_mc, led_cdev);
+}
+
+static struct s2m_rgb *to_rgb_priv(struct led_classdev_mc *cdev)
+{
+ return container_of(cdev, struct s2m_rgb, cdev);
+}
+
+static int s2m_rgb_lut_calc_timing(const u32 *lut, const size_t len,
+ const u32 req_time, u8 *idx)
+{
+ int lo = 0;
+ int hi = len - 2;
+
+ /* Bounds checking */
+ if (req_time < lut[0] || req_time > lut[len - 1])
+ return -EINVAL;
+
+ /*
+ * Perform a binary search to pick the best timing from the LUT.
+ *
+ * The search algorithm picks two consecutive elements of the
+ * LUT and tries to search the pair between which the requested
+ * time lies.
+ */
+ while (lo <= hi) {
+ *idx = (lo + hi) / 2;
+
+ if ((lut[*idx] <= req_time) && (req_time <= lut[*idx + 1]))
+ break;
+
+ if ((req_time < lut[*idx]) && (req_time < lut[*idx + 1]))
+ hi = *idx - 1;
+ else
+ lo = *idx + 1;
+ }
+
+ /*
+ * The searched timing is always less than the requested time. At
+ * times, the succeeding timing in the LUT is closer thus more
+ * accurate. Adjust the resulting value if that's the case.
+ */
+ if (abs(req_time - lut[*idx]) > abs(lut[*idx + 1] - req_time))
+ (*idx)++;
+
+ return 0;
+}
+
+static int s2m_rgb_brightness_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct s2m_rgb *priv = to_rgb_priv(to_cdev_mc(cdev));
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ led_mc_calc_color_components(&priv->cdev, value);
+
+ if (value == LED_OFF)
+ ret = priv->spec->params_reset(priv);
+ else
+ ret = priv->spec->params_apply(priv);
+
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static int s2m_rgb_pattern_set(struct led_classdev *cdev,
+ struct led_pattern *pattern, u32 len, int repeat)
+{
+ struct s2m_rgb *priv = to_rgb_priv(to_cdev_mc(cdev));
+ int brightness_peak = 0;
+ u32 time_hi = 0;
+ u32 time_lo = 0;
+ bool ramp_up_en;
+ bool ramp_dn_en;
+ int ret;
+ int i;
+
+ /*
+ * The typical pattern supported by this device can be
+ * represented with the following graph:
+ *
+ * 255 T ''''''-. .-'''''''-.
+ * | '. .' '.
+ * | \ / \
+ * | '. .' '.
+ * | '-...........-' '-
+ * 0 +----------------------------------------------------> time (s)
+ *
+ * <---- HIGH ----><-- LOW --><-------- HIGH --------->
+ * <-----><-------><---------><-------><-----><------->
+ * stay_hi ramp_dn stay_lo ramp_up stay_hi ramp_dn
+ *
+ * There are two states, named HIGH and LOW. HIGH has a non-zero
+ * brightness level, while LOW is of zero brightness. The
+ * pattern provided should mention only one zero and non-zero
+ * brightness level. The hardware always starts the pattern from
+ * the HIGH state, as shown in the graph.
+ *
+ * The HIGH state can be divided in three somewhat equal timings:
+ * ramp_up, stay_hi, and ramp_dn. The LOW state has only one
+ * timing: stay_lo.
+ */
+
+ /* Only indefinitely looping patterns are supported. */
+ if (repeat != -1)
+ return -EINVAL;
+
+ /* Pattern should consist of at least two tuples. */
+ if (len < 2)
+ return -EINVAL;
+
+ for (i = 0; i < len; i++) {
+ int brightness = pattern[i].brightness;
+ u32 delta_t = pattern[i].delta_t;
+
+ if (brightness) {
+ /*
+ * The pattern shold define only one non-zero
+ * brightness in the HIGH state. The device
+ * doesn't have any provisions to handle
+ * multiple peak brightness levels.
+ */
+ if (brightness_peak && brightness_peak != brightness)
+ return -EINVAL;
+
+ brightness_peak = brightness;
+ time_hi += delta_t;
+ ramp_dn_en = !!delta_t;
+ } else {
+ time_lo += delta_t;
+ ramp_up_en = !!delta_t;
+ }
+ }
+
+ mutex_lock(&priv->lock);
+
+ /*
+ * The timings ramp_up, stay_hi, and ramp_dn of the HIGH state
+ * are roughly equal. Firstly, calculate and set timings for
+ * ramp_up and ramp_dn (making sure they're exactly equal).
+ */
+ priv->ramp_up = 0;
+ priv->ramp_dn = 0;
+
+ if (ramp_up_en) {
+ ret = s2m_rgb_lut_calc_timing(priv->spec->lut_ramp_up,
+ priv->spec->lut_ramp_up_len,
+ time_hi / 3, &priv->ramp_up);
+ if (ret < 0)
+ goto param_fail;
+ }
+
+ if (ramp_dn_en) {
+ ret = s2m_rgb_lut_calc_timing(priv->spec->lut_ramp_dn,
+ priv->spec->lut_ramp_dn_len,
+ time_hi / 3, &priv->ramp_dn);
+ if (ret < 0)
+ goto param_fail;
+ }
+
+ /*
+ * Subtract the allocated ramp timings from time_hi (and also
+ * making sure it doesn't underflow!). The remaining time is
+ * allocated to stay_hi.
+ */
+ time_hi -= min(time_hi, priv->spec->lut_ramp_up[priv->ramp_up]);
+ time_hi -= min(time_hi, priv->spec->lut_ramp_dn[priv->ramp_dn]);
+
+ ret = s2m_rgb_lut_calc_timing(priv->spec->lut_stay_hi,
+ priv->spec->lut_stay_hi_len, time_hi,
+ &priv->stay_hi);
+ if (ret < 0)
+ goto param_fail;
+
+ ret = s2m_rgb_lut_calc_timing(priv->spec->lut_stay_lo,
+ priv->spec->lut_stay_lo_len, time_lo,
+ &priv->stay_lo);
+ if (ret < 0)
+ goto param_fail;
+
+ led_mc_calc_color_components(&priv->cdev, brightness_peak);
+ ret = priv->spec->params_apply(priv);
+ if (ret < 0)
+ goto param_fail;
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+
+param_fail:
+ mutex_unlock(&priv->lock);
+ priv->ramp_up = 0;
+ priv->ramp_dn = 0;
+ priv->stay_hi = 0;
+ priv->stay_lo = 0;
+
+ return ret;
+}
+
+static int s2m_rgb_pattern_clear(struct led_classdev *cdev)
+{
+ struct s2m_rgb *priv = to_rgb_priv(to_cdev_mc(cdev));
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ ret = priv->spec->params_reset(priv);
+
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static int s2mu005_rgb_apply_params(struct s2m_rgb *priv)
+{
+ struct regmap *regmap = priv->regmap;
+ unsigned int ramp_val = 0;
+ unsigned int stay_val = 0;
+ int ret;
+ int i;
+
+ ramp_val |= FIELD_PREP(S2MU005_RGB_CH_RAMP_UP, priv->ramp_up);
+ ramp_val |= FIELD_PREP(S2MU005_RGB_CH_RAMP_DN, priv->ramp_dn);
+
+ stay_val |= FIELD_PREP(S2MU005_RGB_CH_STAY_HI, priv->stay_hi);
+ stay_val |= FIELD_PREP(S2MU005_RGB_CH_STAY_LO, priv->stay_lo);
+
+ ret = regmap_write(regmap, S2MU005_REG_RGB_EN, S2MU005_RGB_RESET);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to reset RGB LEDs\n");
+ return ret;
+ }
+
+ for (i = 0; i < priv->cdev.num_colors; i++) {
+ ret = regmap_write(regmap, S2MU005_REG_RGB_CH_CTRL(i),
+ priv->cdev.subled_info[i].brightness);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to set LED brightness\n");
+ return ret;
+ }
+
+ ret = regmap_write(regmap, S2MU005_REG_RGB_CH_RAMP(i), ramp_val);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to set ramp timings\n");
+ return ret;
+ }
+
+ ret = regmap_write(regmap, S2MU005_REG_RGB_CH_STAY(i), stay_val);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to set stay timings\n");
+ return ret;
+ }
+ }
+
+ ret = regmap_update_bits(regmap, S2MU005_REG_RGB_EN, S2MU005_RGB_SLOPE,
+ S2MU005_RGB_SLOPE_SMOOTH);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to set ramp slope\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int s2mu005_rgb_reset_params(struct s2m_rgb *priv)
+{
+ struct regmap *regmap = priv->regmap;
+ int ret;
+
+ ret = regmap_write(regmap, S2MU005_REG_RGB_EN, S2MU005_RGB_RESET);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to reset RGB LEDs\n");
+ return ret;
+ }
+
+ priv->ramp_up = 0;
+ priv->ramp_dn = 0;
+ priv->stay_hi = 0;
+ priv->stay_lo = 0;
+
+ return 0;
+}
+
+static const u32 s2mu005_rgb_lut_ramp[] = {
+ 0, 100, 200, 300, 400, 500, 600, 700,
+ 800, 1000, 1200, 1400, 1600, 1800, 2000, 2200,
+};
+
+static const u32 s2mu005_rgb_lut_stay_hi[] = {
+ 100, 200, 300, 400, 500, 750, 1000, 1250,
+ 1500, 1750, 2000, 2250, 2500, 2750, 3000, 3250,
+};
+
+static const u32 s2mu005_rgb_lut_stay_lo[] = {
+ 0, 500, 1000, 1500, 2000, 2500, 3000, 3500,
+ 4000, 4500, 5000, 6000, 7000, 8000, 10000, 12000,
+};
+
+static const struct s2m_rgb_spec s2mu005_rgb_spec = {
+ .params_apply = s2mu005_rgb_apply_params,
+ .params_reset = s2mu005_rgb_reset_params,
+ .lut_ramp_up = s2mu005_rgb_lut_ramp,
+ .lut_ramp_up_len = ARRAY_SIZE(s2mu005_rgb_lut_ramp),
+ .lut_ramp_dn = s2mu005_rgb_lut_ramp,
+ .lut_ramp_dn_len = ARRAY_SIZE(s2mu005_rgb_lut_ramp),
+ .lut_stay_hi = s2mu005_rgb_lut_stay_hi,
+ .lut_stay_hi_len = ARRAY_SIZE(s2mu005_rgb_lut_stay_hi),
+ .lut_stay_lo = s2mu005_rgb_lut_stay_lo,
+ .lut_stay_lo_len = ARRAY_SIZE(s2mu005_rgb_lut_stay_lo),
+ .max_brightness = 255,
+};
+
+static struct mc_subled s2mu005_rgb_subled_info[] = {
+ {
+ .channel = 0,
+ .color_index = LED_COLOR_ID_BLUE,
+ }, {
+ .channel = 1,
+ .color_index = LED_COLOR_ID_GREEN,
+ }, {
+ .channel = 2,
+ .color_index = LED_COLOR_ID_RED,
+ },
+};
+
+static int s2m_rgb_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sec_pmic_dev *pmic_drvdata = dev_get_drvdata(dev->parent);
+ struct s2m_rgb *priv;
+ struct led_init_data init_data = {};
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return dev_err_probe(dev, -ENOMEM, "failed to allocate driver private\n");
+
+ platform_set_drvdata(pdev, priv);
+ priv->dev = dev;
+ priv->regmap = pmic_drvdata->regmap_pmic;
+
+ switch (platform_get_device_id(pdev)->driver_data) {
+ case S2MU005:
+ priv->spec = &s2mu005_rgb_spec;
+ priv->cdev.subled_info = s2mu005_rgb_subled_info;
+ priv->cdev.num_colors = ARRAY_SIZE(s2mu005_rgb_subled_info);
+ break;
+ default:
+ return dev_err_probe(dev, -ENODEV,
+ "device type %d is not supported by driver\n",
+ pmic_drvdata->device_type);
+ }
+
+ priv->cdev.led_cdev.max_brightness = priv->spec->max_brightness;
+ priv->cdev.led_cdev.brightness_set_blocking = s2m_rgb_brightness_set;
+ priv->cdev.led_cdev.pattern_set = s2m_rgb_pattern_set;
+ priv->cdev.led_cdev.pattern_clear = s2m_rgb_pattern_clear;
+
+ ret = devm_mutex_init(dev, &priv->lock);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to create mutex lock\n");
+
+ init_data.fwnode = of_fwnode_handle(dev->of_node);
+ ret = devm_led_classdev_multicolor_register_ext(dev, &priv->cdev,
+ &init_data);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to create LED device\n");
+
+ return 0;
+}
+
+static const struct platform_device_id s2m_rgb_id_table[] = {
+ { "s2mu005-rgb", S2MU005 },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, s2m_rgb_id_table);
+
+#ifdef CONFIG_OF
+/*
+ * Device is instantiated through parent MFD device and device matching
+ * is done through platform_device_id.
+ *
+ * However if device's DT node contains proper compatible and driver is
+ * built as a module, then the *module* matching will be done through DT
+ * aliases. This requires of_device_id table. In the same time this will
+ * not change the actual *device* matching so do not add .of_match_table.
+ */
+static const struct of_device_id s2m_rgb_of_match_table[] = {
+ {
+ .compatible = "samsung,s2mu005-rgb",
+ .data = (void *)S2MU005,
+ }, {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, s2m_rgb_of_match_table);
+#endif
+
+static struct platform_driver s2m_rgb_driver = {
+ .driver = {
+ .name = "s2m-rgb",
+ },
+ .probe = s2m_rgb_probe,
+ .id_table = s2m_rgb_id_table,
+};
+module_platform_driver(s2m_rgb_driver);
+
+MODULE_DESCRIPTION("RGB LED Driver For Samsung S2M Series PMICs");
+MODULE_AUTHOR("Kaustabh Chakraborty <kauschluss@disroot.org>");
+MODULE_LICENSE("GPL");
--
2.52.0
^ permalink raw reply related
* [PATCH v2 08/12] leds: flash: add support for Samsung S2M series PMIC flash LED device
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty
In-Reply-To: <20260126-s2mu005-pmic-v2-0-78f1a75f547a@disroot.org>
Add support for flash LEDs found in certain Samsung S2M series PMICs.
The device has two channels for LEDs, typically for the back and front
cameras in mobile devices. Both channels can be independently
controlled, and can be operated in torch or flash modes.
The driver includes initial support for the S2MU005 PMIC flash LEDs.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
drivers/leds/flash/Kconfig | 12 ++
drivers/leds/flash/Makefile | 1 +
drivers/leds/flash/leds-s2m-flash.c | 410 ++++++++++++++++++++++++++++++++++++
3 files changed, 423 insertions(+)
diff --git a/drivers/leds/flash/Kconfig b/drivers/leds/flash/Kconfig
index 5e08102a67841..be62e05277429 100644
--- a/drivers/leds/flash/Kconfig
+++ b/drivers/leds/flash/Kconfig
@@ -114,6 +114,18 @@ config LEDS_RT8515
To compile this driver as a module, choose M here: the module
will be called leds-rt8515.
+config LEDS_S2M_FLASH
+ tristate "Samsung S2M series PMICs flash/torch LED support"
+ depends on LEDS_CLASS
+ depends on MFD_SEC_CORE
+ depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
+ select REGMAP_IRQ
+ help
+ This option enables support for the flash/torch LEDs found in
+ certain Samsung S2M series PMICs, such as the S2MU005. It has
+ a LED channel dedicated for every physical LED. The LEDs can
+ be controlled in flash and torch modes.
+
config LEDS_SGM3140
tristate "LED support for the SGM3140"
depends on V4L2_FLASH_LED_CLASS || !V4L2_FLASH_LED_CLASS
diff --git a/drivers/leds/flash/Makefile b/drivers/leds/flash/Makefile
index 712fb737a428e..44e6c1b4beb37 100644
--- a/drivers/leds/flash/Makefile
+++ b/drivers/leds/flash/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o
obj-$(CONFIG_LEDS_QCOM_FLASH) += leds-qcom-flash.o
obj-$(CONFIG_LEDS_RT4505) += leds-rt4505.o
obj-$(CONFIG_LEDS_RT8515) += leds-rt8515.o
+obj-$(CONFIG_LEDS_S2M_FLASH) += leds-s2m-flash.o
obj-$(CONFIG_LEDS_SGM3140) += leds-sgm3140.o
obj-$(CONFIG_LEDS_SY7802) += leds-sy7802.o
obj-$(CONFIG_LEDS_TPS6131X) += leds-tps6131x.o
diff --git a/drivers/leds/flash/leds-s2m-flash.c b/drivers/leds/flash/leds-s2m-flash.c
new file mode 100644
index 0000000000000..1be2745c475bf
--- /dev/null
+++ b/drivers/leds/flash/leds-s2m-flash.c
@@ -0,0 +1,410 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Flash and Torch LED Driver for Samsung S2M series PMICs.
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#include <linux/container_of.h>
+#include <linux/led-class-flash.h>
+#include <linux/mfd/samsung/core.h>
+#include <linux/mfd/samsung/s2mu005.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <media/v4l2-flash-led-class.h>
+
+#define MAX_CHANNELS 2
+
+struct s2m_fled {
+ struct device *dev;
+ struct regmap *regmap;
+ struct led_classdev_flash cdev;
+ struct v4l2_flash *v4l2_flash;
+ struct mutex lock;
+ const struct s2m_fled_spec *spec;
+ unsigned int pmic_revision;
+ u8 channel;
+ u8 flash_brightness;
+ u8 flash_timeout;
+};
+
+struct s2m_fled_spec {
+ u8 num_channels;
+ u32 torch_max_brightness;
+ u32 flash_min_current_ua;
+ u32 flash_max_current_ua;
+ u32 flash_min_timeout_us;
+ u32 flash_max_timeout_us;
+ int (*torch_brightness_set_blocking)(struct led_classdev *led_cdev,
+ enum led_brightness brightness);
+ const struct led_flash_ops *flash_ops;
+};
+
+static struct led_classdev_flash *to_cdev_flash(struct led_classdev *cdev)
+{
+ return container_of(cdev, struct led_classdev_flash, led_cdev);
+}
+
+static struct s2m_fled *to_led_priv(struct led_classdev_flash *cdev)
+{
+ return container_of(cdev, struct s2m_fled, cdev);
+}
+
+static int s2m_fled_flash_brightness_set(struct led_classdev_flash *cdev,
+ u32 brightness)
+{
+ struct s2m_fled *priv = to_led_priv(cdev);
+ struct led_flash_setting *setting = &cdev->brightness;
+
+ priv->flash_brightness = (brightness - setting->min) / setting->step;
+
+ return 0;
+}
+
+static int s2m_fled_flash_timeout_set(struct led_classdev_flash *cdev,
+ u32 timeout)
+{
+ struct s2m_fled *priv = to_led_priv(cdev);
+ struct led_flash_setting *setting = &cdev->timeout;
+
+ priv->flash_timeout = (timeout - setting->min) / setting->step;
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS)
+static int s2m_fled_flash_external_strobe_set(struct v4l2_flash *v4l2_flash,
+ bool enable)
+{
+ struct s2m_fled *priv = to_led_priv(v4l2_flash->fled_cdev);
+
+ mutex_lock(&priv->lock);
+
+ priv->cdev.ops->strobe_set(&priv->cdev, enable);
+
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+static const struct v4l2_flash_ops s2m_fled_v4l2_flash_ops = {
+ .external_strobe_set = s2m_fled_flash_external_strobe_set,
+};
+#else
+static const struct v4l2_flash_ops s2m_fled_v4l2_flash_ops;
+#endif
+
+static int s2mu005_fled_torch_brightness_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct s2m_fled *priv = to_led_priv(to_cdev_flash(cdev));
+ struct regmap *regmap = priv->regmap;
+ u8 channel = priv->channel;
+ unsigned int reg_enable;
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ /*
+ * Get the LED enable register address. Revision EVT0 has the
+ * register at CTRL4, while EVT1 and higher have it at CTRL6.
+ */
+ if (priv->pmic_revision == 0)
+ reg_enable = S2MU005_REG_FLED_CTRL4;
+ else
+ reg_enable = S2MU005_REG_FLED_CTRL6;
+
+ if (value == LED_OFF) {
+ ret = regmap_clear_bits(regmap, reg_enable,
+ S2MU005_FLED_TORCH_EN(channel));
+ if (ret < 0)
+ dev_err(priv->dev, "failed to disable torch LED\n");
+ goto unlock;
+ }
+
+ ret = regmap_update_bits(regmap, S2MU005_REG_FLED_CH_CTRL1(channel),
+ S2MU005_FLED_TORCH_IOUT,
+ FIELD_PREP(S2MU005_FLED_TORCH_IOUT, value - 1));
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to set torch current\n");
+ goto unlock;
+ }
+
+ ret = regmap_set_bits(regmap, reg_enable, S2MU005_FLED_TORCH_EN(channel));
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to enable torch LED\n");
+ goto unlock;
+ }
+
+unlock:
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static int s2mu005_fled_flash_strobe_set(struct led_classdev_flash *cdev,
+ bool state)
+{
+ struct s2m_fled *priv = to_led_priv(cdev);
+ struct regmap *regmap = priv->regmap;
+ u8 channel = priv->channel;
+ unsigned int reg_enable;
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ /*
+ * Get the LED enable register address. Revision EVT0 has the
+ * register at CTRL4, while EVT1 and higher have it at CTRL6.
+ */
+ if (priv->pmic_revision == 0)
+ reg_enable = S2MU005_REG_FLED_CTRL4;
+ else
+ reg_enable = S2MU005_REG_FLED_CTRL6;
+
+ ret = regmap_clear_bits(regmap, reg_enable, S2MU005_FLED_FLASH_EN(channel));
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to disable flash LED\n");
+ goto unlock;
+ }
+
+ if (!state)
+ goto unlock;
+
+ ret = regmap_update_bits(regmap, S2MU005_REG_FLED_CH_CTRL0(channel),
+ S2MU005_FLED_FLASH_IOUT,
+ FIELD_PREP(S2MU005_FLED_FLASH_IOUT,
+ priv->flash_brightness));
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to set flash brightness\n");
+ goto unlock;
+ }
+
+ ret = regmap_update_bits(regmap, S2MU005_REG_FLED_CH_CTRL3(channel),
+ S2MU005_FLED_FLASH_TIMEOUT,
+ FIELD_PREP(S2MU005_FLED_FLASH_TIMEOUT,
+ priv->flash_timeout));
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to set flash timeout\n");
+ goto unlock;
+ }
+
+ ret = regmap_set_bits(regmap, reg_enable, S2MU005_FLED_FLASH_EN(channel));
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to enable flash LED\n");
+ goto unlock;
+ }
+
+unlock:
+ mutex_unlock(&priv->lock);
+
+ return 0;
+}
+
+static int s2mu005_fled_flash_strobe_get(struct led_classdev_flash *cdev,
+ bool *state)
+{
+ struct s2m_fled *priv = to_led_priv(cdev);
+ struct regmap *regmap = priv->regmap;
+ u8 channel = priv->channel;
+ u32 val;
+ int ret;
+
+ mutex_lock(&priv->lock);
+
+ ret = regmap_read(regmap, S2MU005_REG_FLED_STATUS, &val);
+ if (ret < 0) {
+ dev_err(priv->dev, "failed to fetch LED status");
+ goto unlock;
+ }
+
+ *state = !!(val & S2MU005_FLED_FLASH_STATUS(channel));
+
+unlock:
+ mutex_unlock(&priv->lock);
+
+ return ret;
+}
+
+static const struct led_flash_ops s2mu005_fled_flash_ops = {
+ .flash_brightness_set = s2m_fled_flash_brightness_set,
+ .timeout_set = s2m_fled_flash_timeout_set,
+ .strobe_set = s2mu005_fled_flash_strobe_set,
+ .strobe_get = s2mu005_fled_flash_strobe_get,
+};
+
+static const struct s2m_fled_spec s2mu005_fled_spec = {
+ .num_channels = 2,
+ .torch_max_brightness = 16,
+ .flash_min_current_ua = 25000,
+ .flash_max_current_ua = 375000, /* 400000 causes flickering */
+ .flash_min_timeout_us = 62000,
+ .flash_max_timeout_us = 992000,
+ .torch_brightness_set_blocking = s2mu005_fled_torch_brightness_set,
+ .flash_ops = &s2mu005_fled_flash_ops,
+};
+
+static int s2m_fled_init_channel(struct device *dev, struct fwnode_handle *fwnp,
+ struct s2m_fled *priv)
+{
+ struct led_classdev *led = &priv->cdev.led_cdev;
+ struct led_init_data init_data = {};
+ struct v4l2_flash_config v4l2_cfg = {};
+ int ret;
+
+ led->max_brightness = priv->spec->torch_max_brightness;
+ led->brightness_set_blocking = priv->spec->torch_brightness_set_blocking;
+ led->flags |= LED_DEV_CAP_FLASH;
+
+ priv->cdev.timeout.min = priv->spec->flash_min_timeout_us;
+ priv->cdev.timeout.step = priv->spec->flash_min_timeout_us;
+ priv->cdev.timeout.max = priv->spec->flash_max_timeout_us;
+ priv->cdev.timeout.val = priv->spec->flash_max_timeout_us;
+
+ priv->cdev.brightness.min = priv->spec->flash_min_current_ua;
+ priv->cdev.brightness.step = priv->spec->flash_min_current_ua;
+ priv->cdev.brightness.max = priv->spec->flash_max_current_ua;
+ priv->cdev.brightness.val = priv->spec->flash_max_current_ua;
+
+ s2m_fled_flash_timeout_set(&priv->cdev, priv->cdev.timeout.val);
+ s2m_fled_flash_brightness_set(&priv->cdev, priv->cdev.brightness.val);
+
+ priv->cdev.ops = priv->spec->flash_ops;
+
+ init_data.fwnode = fwnp;
+ ret = devm_led_classdev_flash_register_ext(dev, &priv->cdev, &init_data);
+ if (ret < 0) {
+ dev_err(dev, "failed to create LED flash device\n");
+ return ret;
+ }
+
+ v4l2_cfg.intensity.min = priv->spec->flash_min_current_ua;
+ v4l2_cfg.intensity.step = priv->spec->flash_min_current_ua;
+ v4l2_cfg.intensity.max = priv->spec->flash_max_current_ua;
+ v4l2_cfg.intensity.val = priv->spec->flash_max_current_ua;
+
+ v4l2_cfg.has_external_strobe = true;
+
+ priv->v4l2_flash = v4l2_flash_init(dev, fwnp, &priv->cdev,
+ &s2m_fled_v4l2_flash_ops, &v4l2_cfg);
+ if (IS_ERR(priv->v4l2_flash)) {
+ dev_err(dev, "failed to create V4L2 flash device\n");
+ v4l2_flash_release(priv->v4l2_flash);
+ return PTR_ERR(priv->v4l2_flash);
+ }
+
+ return devm_add_action_or_reset(dev, (void *)v4l2_flash_release,
+ priv->v4l2_flash);
+}
+
+static int s2m_fled_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct sec_pmic_dev *pmic_drvdata = dev_get_drvdata(dev->parent);
+ struct s2m_fled *priv;
+ struct fwnode_handle *child;
+ struct regmap *regmap;
+ const struct s2m_fled_spec *spec;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv) * MAX_CHANNELS, GFP_KERNEL);
+ if (!priv)
+ return dev_err_probe(dev, -ENOMEM, "failed to allocate driver private\n");
+
+ platform_set_drvdata(pdev, priv);
+ regmap = pmic_drvdata->regmap_pmic;
+
+ switch (platform_get_device_id(pdev)->driver_data) {
+ case S2MU005:
+ spec = &s2mu005_fled_spec;
+ /* Enable the LED channels. */
+ ret = regmap_set_bits(regmap, S2MU005_REG_FLED_CTRL1,
+ S2MU005_FLED_CH_EN);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "failed to enable LED channels\n");
+ break;
+ default:
+ return dev_err_probe(dev, -ENODEV,
+ "device type %d is not supported by driver\n",
+ pmic_drvdata->device_type);
+ }
+
+ device_for_each_child_node(dev, child) {
+ u32 reg;
+
+ if (fwnode_property_read_u32(child, "reg", ®))
+ goto next_child;
+
+ if (reg >= spec->num_channels) {
+ dev_warn(dev, "channel %d is non-existent\n", reg);
+ goto next_child;
+ }
+
+ if (priv[reg].dev) {
+ dev_warn(dev, "duplicate node for channel %d\n", reg);
+ goto next_child;
+ }
+
+ priv[reg].dev = dev;
+ priv[reg].regmap = regmap;
+ priv[reg].channel = (u8)reg;
+ priv[reg].spec = spec;
+ priv[reg].pmic_revision = pmic_drvdata->revision;
+
+ ret = devm_mutex_init(dev, &priv[reg].lock);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to create mutex lock\n");
+
+ ret = s2m_fled_init_channel(dev, child, &priv[reg]);
+ if (ret < 0)
+ dev_warn(dev, "channel init failed (%d)\n", ret);
+
+next_child:
+ fwnode_handle_put(child);
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id s2m_fled_id_table[] = {
+ { "s2mu005-flash", S2MU005 },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, s2m_fled_id_table);
+
+#ifdef CONFIG_OF
+/*
+ * Device is instantiated through parent MFD device and device matching
+ * is done through platform_device_id.
+ *
+ * However if device's DT node contains proper compatible and driver is
+ * built as a module, then the *module* matching will be done through DT
+ * aliases. This requires of_device_id table. In the same time this will
+ * not change the actual *device* matching so do not add .of_match_table.
+ */
+static const struct of_device_id s2m_fled_of_match_table[] = {
+ {
+ .compatible = "samsung,s2mu005-flash",
+ .data = (void *)S2MU005,
+ }, {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, s2m_fled_of_match_table);
+#endif
+
+static struct platform_driver s2m_fled_driver = {
+ .driver = {
+ .name = "s2m-flash",
+ },
+ .probe = s2m_fled_probe,
+ .id_table = s2m_fled_id_table,
+};
+module_platform_driver(s2m_fled_driver);
+
+MODULE_DESCRIPTION("Flash/Torch LED Driver For Samsung S2M Series PMICs");
+MODULE_AUTHOR("Kaustabh Chakraborty <kauschluss@disroot.org>");
+MODULE_LICENSE("GPL");
--
2.52.0
^ permalink raw reply related
* [PATCH v2 07/12] mfd: sec: store hardware revision in sec_pmic_dev and add S2MU005 support
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty
In-Reply-To: <20260126-s2mu005-pmic-v2-0-78f1a75f547a@disroot.org>
The device revision matters in cases when in some PMICs, the correct
register offsets very in different revisions. Instead of just debug
printing the value, store it in the driver data struct.
Unlike other devices, S2MU005 has its hardware revision ID in register
offset 0x73. Allow handling different devices and add support for S2MU005.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
drivers/mfd/sec-common.c | 41 ++++++++++++++++++++++++++++++----------
include/linux/mfd/samsung/core.h | 1 +
2 files changed, 32 insertions(+), 10 deletions(-)
diff --git a/drivers/mfd/sec-common.c b/drivers/mfd/sec-common.c
index bc2a1f2c6dc7a..069a1ba9aa1f1 100644
--- a/drivers/mfd/sec-common.c
+++ b/drivers/mfd/sec-common.c
@@ -16,6 +16,7 @@
#include <linux/mfd/samsung/irq.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps13.h>
+#include <linux/mfd/samsung/s2mu005.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/pm.h>
@@ -111,17 +112,38 @@ static const struct mfd_cell s2mu005_devs[] = {
MFD_CELL_OF("s2mu005-rgb", NULL, NULL, 0, 0, "samsung,s2mu005-rgb"),
};
-static void sec_pmic_dump_rev(struct sec_pmic_dev *sec_pmic)
+static int sec_pmic_store_rev(struct sec_pmic_dev *sec_pmic)
{
- unsigned int val;
+ unsigned int reg, mask, shift;
+ int ret;
- /* For s2mpg1x, the revision is in a different regmap */
- if (sec_pmic->device_type == S2MPG10)
- return;
+ switch (sec_pmic->device_type) {
+ case S2MPG10:
+ /* For s2mpg1x, the revision is in a different regmap */
+ return 0;
+ case S2MU005:
+ reg = S2MU005_REG_ID;
+ mask = S2MU005_ID_MASK;
+ shift = S2MU005_ID_SHIFT;
+ break;
+ default:
+ /* For other device types, the REG_ID is always the first register. */
+ reg = S2MPS11_REG_ID;
+ mask = ~0;
+ shift = 0;
+ }
+
+ ret = regmap_read(sec_pmic->regmap_pmic, reg, &sec_pmic->revision);
+ if (ret) {
+ dev_err(sec_pmic->dev, "Failed to read PMIC revision (%d)\n", ret);
+ return ret;
+ }
+
+ sec_pmic->revision &= mask;
+ sec_pmic->revision >>= shift;
- /* For each device type, the REG_ID is always the first register */
- if (!regmap_read(sec_pmic->regmap_pmic, S2MPS11_REG_ID, &val))
- dev_dbg(sec_pmic->dev, "Revision: 0x%x\n", val);
+ dev_dbg(sec_pmic->dev, "Revision: 0x%x\n", sec_pmic->revision);
+ return 0;
}
static void sec_pmic_configure(struct sec_pmic_dev *sec_pmic)
@@ -262,9 +284,8 @@ int sec_pmic_probe(struct device *dev, int device_type, unsigned int irq,
return ret;
sec_pmic_configure(sec_pmic);
- sec_pmic_dump_rev(sec_pmic);
- return ret;
+ return sec_pmic_store_rev(sec_pmic);
}
EXPORT_SYMBOL_GPL(sec_pmic_probe);
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index 43e0c5e55f5d3..56aa33d7e3d60 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -70,6 +70,7 @@ struct sec_pmic_dev {
int device_type;
int irq;
+ unsigned int revision;
};
struct sec_platform_data {
--
2.52.0
^ permalink raw reply related
* [PATCH v2 06/12] mfd: sec: add support for S2MU005 PMIC
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty
In-Reply-To: <20260126-s2mu005-pmic-v2-0-78f1a75f547a@disroot.org>
Samsung's S2MU005 PMIC includes subdevices for a charger, an MUIC (Micro
USB Interface Controller), and flash and RGB LED controllers.
S2MU005's interrupt registers can be properly divided into three regmap
IRQ chips, one each for the charger, flash LEDs, and the MUIC.
Add initial support for S2MU005 in the PMIC driver, along with it's three
interrupt chips.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
drivers/mfd/sec-common.c | 16 ++
drivers/mfd/sec-i2c.c | 12 ++
drivers/mfd/sec-irq.c | 74 ++++++++
include/linux/mfd/samsung/core.h | 1 +
include/linux/mfd/samsung/irq.h | 66 ++++++++
include/linux/mfd/samsung/s2mu005.h | 328 ++++++++++++++++++++++++++++++++++++
6 files changed, 497 insertions(+)
diff --git a/drivers/mfd/sec-common.c b/drivers/mfd/sec-common.c
index 0021f9ae8484f..bc2a1f2c6dc7a 100644
--- a/drivers/mfd/sec-common.c
+++ b/drivers/mfd/sec-common.c
@@ -99,6 +99,18 @@ static const struct mfd_cell s2mpu05_devs[] = {
MFD_CELL_RES("s2mps15-rtc", s2mpu05_rtc_resources),
};
+static const struct resource s2mu005_muic_resources[] = {
+ DEFINE_RES_IRQ_NAMED(S2MU005_IRQ_MUIC_ATTACH, "attach"),
+ DEFINE_RES_IRQ_NAMED(S2MU005_IRQ_MUIC_DETACH, "detach"),
+};
+
+static const struct mfd_cell s2mu005_devs[] = {
+ MFD_CELL_OF("s2mu005-charger", NULL, NULL, 0, 0, "samsung,s2mu005-charger"),
+ MFD_CELL_OF("s2mu005-flash", NULL, NULL, 0, 0, "samsung,s2mu005-flash"),
+ MFD_CELL_OF("s2mu005-muic", s2mu005_muic_resources, NULL, 0, 0, "samsung,s2mu005-muic"),
+ MFD_CELL_OF("s2mu005-rgb", NULL, NULL, 0, 0, "samsung,s2mu005-rgb"),
+};
+
static void sec_pmic_dump_rev(struct sec_pmic_dev *sec_pmic)
{
unsigned int val;
@@ -235,6 +247,10 @@ int sec_pmic_probe(struct device *dev, int device_type, unsigned int irq,
sec_devs = s2mpu05_devs;
num_sec_devs = ARRAY_SIZE(s2mpu05_devs);
break;
+ case S2MU005:
+ sec_devs = s2mu005_devs;
+ num_sec_devs = ARRAY_SIZE(s2mu005_devs);
+ break;
default:
return dev_err_probe(sec_pmic->dev, -EINVAL,
"Unsupported device type %d\n",
diff --git a/drivers/mfd/sec-i2c.c b/drivers/mfd/sec-i2c.c
index 3132b849b4bc4..3f1d70cc3292b 100644
--- a/drivers/mfd/sec-i2c.c
+++ b/drivers/mfd/sec-i2c.c
@@ -17,6 +17,7 @@
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s2mps15.h>
#include <linux/mfd/samsung/s2mpu02.h>
+#include <linux/mfd/samsung/s2mu005.h>
#include <linux/mfd/samsung/s5m8767.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
@@ -130,6 +131,11 @@ static const struct regmap_config s2mpu05_regmap_config = {
.val_bits = 8,
};
+static const struct regmap_config s2mu005_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
static const struct regmap_config s5m8767_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -203,6 +209,11 @@ static const struct sec_pmic_i2c_platform_data s2mpu05_data = {
.device_type = S2MPU05,
};
+static const struct sec_pmic_i2c_platform_data s2mu005_data = {
+ .regmap_cfg = &s2mu005_regmap_config,
+ .device_type = S2MU005,
+};
+
static const struct sec_pmic_i2c_platform_data s5m8767_data = {
.regmap_cfg = &s5m8767_regmap_config,
.device_type = S5M8767X,
@@ -217,6 +228,7 @@ static const struct of_device_id sec_pmic_i2c_of_match[] = {
{ .compatible = "samsung,s2mps15-pmic", .data = &s2mps15_data, },
{ .compatible = "samsung,s2mpu02-pmic", .data = &s2mpu02_data, },
{ .compatible = "samsung,s2mpu05-pmic", .data = &s2mpu05_data, },
+ { .compatible = "samsung,s2mu005-pmic", .data = &s2mu005_data, },
{ .compatible = "samsung,s5m8767-pmic", .data = &s5m8767_data, },
{ },
};
diff --git a/drivers/mfd/sec-irq.c b/drivers/mfd/sec-irq.c
index 4c0faf4c99893..44a1eb074a082 100644
--- a/drivers/mfd/sec-irq.c
+++ b/drivers/mfd/sec-irq.c
@@ -15,6 +15,7 @@
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s2mpu02.h>
#include <linux/mfd/samsung/s2mpu05.h>
+#include <linux/mfd/samsung/s2mu005.h>
#include <linux/mfd/samsung/s5m8767.h>
#include <linux/regmap.h>
#include "sec-core.h"
@@ -164,6 +165,65 @@ static const struct regmap_irq s2mpu05_irqs[] = {
REGMAP_IRQ_REG(S2MPU05_IRQ_TSD, 2, S2MPU05_IRQ_TSD_MASK),
};
+static const struct regmap_irq s2mu005_irqs[] = {
+ REGMAP_IRQ_REG(S2MU005_IRQ_CHGR_DETBAT, 0, S2MU005_IRQ_CHGR_DETBAT_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_CHGR_BAT, 0, S2MU005_IRQ_CHGR_BAT_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_CHGR_IVR, 0, S2MU005_IRQ_CHGR_IVR_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_CHGR_EVENT, 0, S2MU005_IRQ_CHGR_EVENT_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_CHGR_CHG, 0, S2MU005_IRQ_CHGR_CHG_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_CHGR_VMID, 0, S2MU005_IRQ_CHGR_VMID_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_CHGR_WCIN, 0, S2MU005_IRQ_CHGR_WCIN_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_CHGR_VBUS, 0, S2MU005_IRQ_CHGR_VBUS_MASK),
+
+ REGMAP_IRQ_REG(S2MU005_IRQ_FLED_LBPROT, 1, S2MU005_IRQ_FLED_LBPROT_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_FLED_OPENCH2, 1, S2MU005_IRQ_FLED_OPENCH2_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_FLED_OPENCH1, 1, S2MU005_IRQ_FLED_OPENCH1_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_FLED_SHORTCH2, 1, S2MU005_IRQ_FLED_SHORTCH2_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_FLED_SHORTCH1, 1, S2MU005_IRQ_FLED_SHORTCH1_MASK),
+
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_ATTACH, 2, S2MU005_IRQ_MUIC_ATTACH_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_DETACH, 2, S2MU005_IRQ_MUIC_DETACH_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_KP, 2, S2MU005_IRQ_MUIC_KP_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_LKP, 2, S2MU005_IRQ_MUIC_LKP_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_LKR, 2, S2MU005_IRQ_MUIC_LKR_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_RIDCHG, 2, S2MU005_IRQ_MUIC_RIDCHG_MASK),
+
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_VBUSON, 3, S2MU005_IRQ_MUIC_VBUSON_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_RSVD, 3, S2MU005_IRQ_MUIC_RSVD_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_ADC, 3, S2MU005_IRQ_MUIC_ADC_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_STUCK, 3, S2MU005_IRQ_MUIC_STUCK_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_STUCKRCV, 3, S2MU005_IRQ_MUIC_STUCKRCV_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_MHDL, 3, S2MU005_IRQ_MUIC_MHDL_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_AVCHG, 3, S2MU005_IRQ_MUIC_AVCHG_MASK),
+ REGMAP_IRQ_REG(S2MU005_IRQ_MUIC_VBUSOFF, 3, S2MU005_IRQ_MUIC_VBUSOFF_MASK),
+};
+
+static unsigned int s2mu005_irq_get_reg(struct regmap_irq_chip_data *data,
+ unsigned int base, int index)
+{
+ const unsigned int irqf_regs[] = {
+ S2MU005_REG_CHGR_INT1,
+ S2MU005_REG_FLED_INT1,
+ S2MU005_REG_MUIC_INT1,
+ S2MU005_REG_MUIC_INT2,
+ };
+ const unsigned int mask_regs[] = {
+ S2MU005_REG_CHGR_INT1M,
+ S2MU005_REG_FLED_INT1M,
+ S2MU005_REG_MUIC_INT1M,
+ S2MU005_REG_MUIC_INT2M,
+ };
+
+ switch (base) {
+ case irqf_regs[0]:
+ return irqf_regs[index];
+ case mask_regs[0]:
+ return mask_regs[index];
+ }
+
+ return base;
+}
+
static const struct regmap_irq s5m8767_irqs[] = {
REGMAP_IRQ_REG(S5M8767_IRQ_PWRR, 0, S5M8767_IRQ_PWRR_MASK),
REGMAP_IRQ_REG(S5M8767_IRQ_PWRF, 0, S5M8767_IRQ_PWRF_MASK),
@@ -259,6 +319,17 @@ static const struct regmap_irq_chip s2mpu05_irq_chip = {
.ack_base = S2MPU05_REG_INT1,
};
+static const struct regmap_irq_chip s2mu005_irq_chip = {
+ .name = "s2mu005",
+ .irqs = s2mu005_irqs,
+ .num_irqs = ARRAY_SIZE(s2mu005_irqs),
+ .num_regs = 4,
+ .status_base = S2MU005_REG_CHGR_INT1,
+ .mask_base = S2MU005_REG_CHGR_INT1M,
+ .ack_base = S2MU005_REG_CHGR_INT1,
+ .get_irq_reg = s2mu005_irq_get_reg,
+};
+
static const struct regmap_irq_chip s5m8767_irq_chip = {
.name = "s5m8767",
.irqs = s5m8767_irqs,
@@ -358,6 +429,9 @@ struct regmap_irq_chip_data *sec_irq_init(struct sec_pmic_dev *sec_pmic)
case S2MPU05:
sec_irq_chip = &s2mpu05_irq_chip;
break;
+ case S2MU005:
+ sec_irq_chip = &s2mu005_irq_chip;
+ break;
default:
return dev_err_ptr_probe(sec_pmic->dev, -EINVAL, "Unsupported device type %d\n",
sec_pmic->device_type);
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index c7c3c8cd8d5f9..43e0c5e55f5d3 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -46,6 +46,7 @@ enum sec_device_type {
S2MPS15X,
S2MPU02,
S2MPU05,
+ S2MU005,
};
/**
diff --git a/include/linux/mfd/samsung/irq.h b/include/linux/mfd/samsung/irq.h
index 8402a5f8e18ab..936369a733a1c 100644
--- a/include/linux/mfd/samsung/irq.h
+++ b/include/linux/mfd/samsung/irq.h
@@ -303,6 +303,72 @@ enum s2mpu05_irq {
#define S2MPU05_IRQ_INT140C_MASK BIT(1)
#define S2MPU05_IRQ_TSD_MASK BIT(2)
+enum s2mu005_irq {
+ S2MU005_IRQ_CHGR_DETBAT,
+ S2MU005_IRQ_CHGR_BAT,
+ S2MU005_IRQ_CHGR_IVR,
+ S2MU005_IRQ_CHGR_EVENT,
+ S2MU005_IRQ_CHGR_CHG,
+ S2MU005_IRQ_CHGR_VMID,
+ S2MU005_IRQ_CHGR_WCIN,
+ S2MU005_IRQ_CHGR_VBUS,
+
+ S2MU005_IRQ_FLED_LBPROT,
+ S2MU005_IRQ_FLED_OPENCH2,
+ S2MU005_IRQ_FLED_OPENCH1,
+ S2MU005_IRQ_FLED_SHORTCH2,
+ S2MU005_IRQ_FLED_SHORTCH1,
+
+ S2MU005_IRQ_MUIC_ATTACH,
+ S2MU005_IRQ_MUIC_DETACH,
+ S2MU005_IRQ_MUIC_KP,
+ S2MU005_IRQ_MUIC_LKP,
+ S2MU005_IRQ_MUIC_LKR,
+ S2MU005_IRQ_MUIC_RIDCHG,
+
+ S2MU005_IRQ_MUIC_VBUSON,
+ S2MU005_IRQ_MUIC_RSVD,
+ S2MU005_IRQ_MUIC_ADC,
+ S2MU005_IRQ_MUIC_STUCK,
+ S2MU005_IRQ_MUIC_STUCKRCV,
+ S2MU005_IRQ_MUIC_MHDL,
+ S2MU005_IRQ_MUIC_AVCHG,
+ S2MU005_IRQ_MUIC_VBUSOFF,
+
+ S2MU005_IRQ_NR,
+};
+
+#define S2MU005_IRQ_CHGR_DETBAT_MASK BIT(0)
+#define S2MU005_IRQ_CHGR_BAT_MASK BIT(1)
+#define S2MU005_IRQ_CHGR_IVR_MASK BIT(2)
+#define S2MU005_IRQ_CHGR_EVENT_MASK BIT(3)
+#define S2MU005_IRQ_CHGR_CHG_MASK BIT(4)
+#define S2MU005_IRQ_CHGR_VMID_MASK BIT(5)
+#define S2MU005_IRQ_CHGR_WCIN_MASK BIT(6)
+#define S2MU005_IRQ_CHGR_VBUS_MASK BIT(7)
+
+#define S2MU005_IRQ_FLED_LBPROT_MASK BIT(2)
+#define S2MU005_IRQ_FLED_OPENCH2_MASK BIT(4)
+#define S2MU005_IRQ_FLED_OPENCH1_MASK BIT(5)
+#define S2MU005_IRQ_FLED_SHORTCH2_MASK BIT(6)
+#define S2MU005_IRQ_FLED_SHORTCH1_MASK BIT(7)
+
+#define S2MU005_IRQ_MUIC_ATTACH_MASK BIT(0)
+#define S2MU005_IRQ_MUIC_DETACH_MASK BIT(1)
+#define S2MU005_IRQ_MUIC_KP_MASK BIT(2)
+#define S2MU005_IRQ_MUIC_LKP_MASK BIT(3)
+#define S2MU005_IRQ_MUIC_LKR_MASK BIT(4)
+#define S2MU005_IRQ_MUIC_RIDCHG_MASK BIT(5)
+
+#define S2MU005_IRQ_MUIC_VBUSON_MASK BIT(0)
+#define S2MU005_IRQ_MUIC_RSVD_MASK BIT(1)
+#define S2MU005_IRQ_MUIC_ADC_MASK BIT(2)
+#define S2MU005_IRQ_MUIC_STUCK_MASK BIT(3)
+#define S2MU005_IRQ_MUIC_STUCKRCV_MASK BIT(4)
+#define S2MU005_IRQ_MUIC_MHDL_MASK BIT(5)
+#define S2MU005_IRQ_MUIC_AVCHG_MASK BIT(6)
+#define S2MU005_IRQ_MUIC_VBUSOFF_MASK BIT(7)
+
enum s5m8767_irq {
S5M8767_IRQ_PWRR,
S5M8767_IRQ_PWRF,
diff --git a/include/linux/mfd/samsung/s2mu005.h b/include/linux/mfd/samsung/s2mu005.h
new file mode 100644
index 0000000000000..32ad35dda661d
--- /dev/null
+++ b/include/linux/mfd/samsung/s2mu005.h
@@ -0,0 +1,328 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd
+ * Copyright (c) 2025 Kaustabh Chakraborty <kauschluss@disroot.org>
+ */
+
+#ifndef __LINUX_MFD_S2MU005_H
+#define __LINUX_MFD_S2MU005_H
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+
+/* S2MU005 registers */
+enum s2mu005_reg {
+ S2MU005_REG_CHGR_INT1,
+ S2MU005_REG_CHGR_INT1M,
+
+ S2MU005_REG_FLED_INT1,
+ S2MU005_REG_FLED_INT1M,
+
+ S2MU005_REG_MUIC_INT1,
+ S2MU005_REG_MUIC_INT2,
+ S2MU005_REG_MUIC_INT1M,
+ S2MU005_REG_MUIC_INT2M,
+
+ S2MU005_REG_CHGR_STATUS0,
+ S2MU005_REG_CHGR_STATUS1,
+ S2MU005_REG_CHGR_STATUS2,
+ S2MU005_REG_CHGR_STATUS3,
+ S2MU005_REG_CHGR_STATUS4,
+ S2MU005_REG_CHGR_STATUS5,
+ S2MU005_REG_CHGR_CTRL0,
+ S2MU005_REG_CHGR_CTRL1,
+ S2MU005_REG_CHGR_CTRL2,
+ S2MU005_REG_CHGR_CTRL3,
+ S2MU005_REG_CHGR_CTRL4,
+ S2MU005_REG_CHGR_CTRL5,
+ S2MU005_REG_CHGR_CTRL6,
+ S2MU005_REG_CHGR_CTRL7,
+ S2MU005_REG_CHGR_CTRL8,
+ S2MU005_REG_CHGR_CTRL9,
+ S2MU005_REG_CHGR_CTRL10,
+ S2MU005_REG_CHGR_CTRL11,
+ S2MU005_REG_CHGR_CTRL12,
+ S2MU005_REG_CHGR_CTRL13,
+ S2MU005_REG_CHGR_CTRL14,
+ S2MU005_REG_CHGR_CTRL15,
+ S2MU005_REG_CHGR_CTRL16,
+ S2MU005_REG_CHGR_CTRL17,
+ S2MU005_REG_CHGR_CTRL18,
+ S2MU005_REG_CHGR_CTRL19,
+ S2MU005_REG_CHGR_TEST0,
+ S2MU005_REG_CHGR_TEST1,
+ S2MU005_REG_CHGR_TEST2,
+ S2MU005_REG_CHGR_TEST3,
+ S2MU005_REG_CHGR_TEST4,
+ S2MU005_REG_CHGR_TEST5,
+ S2MU005_REG_CHGR_TEST6,
+ S2MU005_REG_CHGR_TEST7,
+ S2MU005_REG_CHGR_TEST8,
+ S2MU005_REG_CHGR_TEST9,
+ S2MU005_REG_CHGR_TEST10,
+
+ S2MU005_REG_FLED_STATUS,
+ S2MU005_REG_FLED_CH0_CTRL0,
+ S2MU005_REG_FLED_CH0_CTRL1,
+ S2MU005_REG_FLED_CH0_CTRL2,
+ S2MU005_REG_FLED_CH0_CTRL3,
+ S2MU005_REG_FLED_CH1_CTRL0,
+ S2MU005_REG_FLED_CH1_CTRL1,
+ S2MU005_REG_FLED_CH1_CTRL2,
+ S2MU005_REG_FLED_CH1_CTRL3,
+ S2MU005_REG_FLED_CTRL0,
+ S2MU005_REG_FLED_CTRL1,
+ S2MU005_REG_FLED_CTRL2,
+ S2MU005_REG_FLED_CTRL3,
+ S2MU005_REG_FLED_CTRL4,
+ S2MU005_REG_FLED_CTRL5,
+ S2MU005_REG_FLED_CTRL6,
+
+ S2MU005_REG_RGB_EN,
+ S2MU005_REG_RGB_CH0_CTRL,
+ S2MU005_REG_RGB_CH1_CTRL,
+ S2MU005_REG_RGB_CH2_CTRL,
+ S2MU005_REG_RGB_CH0_RAMP,
+ S2MU005_REG_RGB_CH0_STAY,
+ S2MU005_REG_RGB_CH1_RAMP,
+ S2MU005_REG_RGB_CH1_STAY,
+ S2MU005_REG_RGB_CH2_RAMP,
+ S2MU005_REG_RGB_CH2_STAY,
+ S2MU005_REG_RGB_TEST0,
+ S2MU005_REG_RGB_CTRL0,
+
+ S2MU005_REG_MUIC_ADC,
+ S2MU005_REG_MUIC_DEV1,
+ S2MU005_REG_MUIC_DEV2,
+ S2MU005_REG_MUIC_DEV3,
+ S2MU005_REG_MUIC_BUTTON1,
+ S2MU005_REG_MUIC_BUTTON2,
+ S2MU005_REG_MUIC_RESET,
+ S2MU005_REG_MUIC_CHGTYPE,
+ S2MU005_REG_MUIC_DEVAPPLE,
+ S2MU005_REG_MUIC_BCDRESCAN,
+ S2MU005_REG_MUIC_TEST1,
+ S2MU005_REG_MUIC_TEST2,
+ S2MU005_REG_MUIC_TEST3,
+
+ S2MU005_REG_ID = 0x73,
+
+ S2MU005_REG_MUIC_CTRL1 = 0xb2,
+ S2MU005_REG_MUIC_TIMERSET1,
+ S2MU005_REG_MUIC_TIMERSET2,
+ S2MU005_REG_MUIC_SWCTRL,
+ S2MU005_REG_MUIC_TIMERSET3,
+ S2MU005_REG_MUIC_CTRL2,
+ S2MU005_REG_MUIC_CTRL3,
+
+ S2MU005_REG_MUIC_LDOADC_L = 0xbf,
+ S2MU005_REG_MUIC_LDOADC_H,
+};
+
+#define S2MU005_REG_FLED_CH_CTRL0(x) (S2MU005_REG_FLED_CH0_CTRL0 + 4 * (x))
+#define S2MU005_REG_FLED_CH_CTRL1(x) (S2MU005_REG_FLED_CH0_CTRL1 + 4 * (x))
+#define S2MU005_REG_FLED_CH_CTRL2(x) (S2MU005_REG_FLED_CH0_CTRL2 + 4 * (x))
+#define S2MU005_REG_FLED_CH_CTRL3(x) (S2MU005_REG_FLED_CH0_CTRL3 + 4 * (x))
+
+#define S2MU005_REG_RGB_CH_CTRL(x) (S2MU005_REG_RGB_CH0_CTRL + 1 * (x))
+#define S2MU005_REG_RGB_CH_RAMP(x) (S2MU005_REG_RGB_CH0_RAMP + 2 * (x))
+#define S2MU005_REG_RGB_CH_STAY(x) (S2MU005_REG_RGB_CH0_STAY + 2 * (x))
+
+/* S2MU005_REG_CHGR_STATUS0 */
+#define S2MU005_CHGR_VBUS BIT(7)
+#define S2MU005_CHGR_WCIN BIT(6)
+#define S2MU005_CHGR_VMID BIT(5)
+#define S2MU005_CHGR_CHG BIT(4)
+#define S2MU005_CHGR_STAT GENMASK(3, 0)
+
+#define S2MU005_CHGR_STAT_DONE FIELD_PREP(S2MU005_CHGR_STAT, 8)
+#define S2MU005_CHGR_STAT_TOPOFF FIELD_PREP(S2MU005_CHGR_STAT, 7)
+#define S2MU005_CHGR_STAT_DONE_FLAG FIELD_PREP(S2MU005_CHGR_STAT, 6)
+#define S2MU005_CHGR_STAT_CV FIELD_PREP(S2MU005_CHGR_STAT, 5)
+#define S2MU005_CHGR_STAT_CC FIELD_PREP(S2MU005_CHGR_STAT, 4)
+#define S2MU005_CHGR_STAT_COOL_CHG FIELD_PREP(S2MU005_CHGR_STAT, 3)
+#define S2MU005_CHGR_STAT_PRE_CHG FIELD_PREP(S2MU005_CHGR_STAT, 2)
+
+/* S2MU005_REG_CHGR_STATUS1 */
+#define S2MU005_CHGR_DETBAT BIT(7)
+#define S2MU005_CHGR_VBUSOVP GENMASK(6, 4)
+
+#define S2MU005_CHGR_VBUS_OVP_OVERVOLT FIELD_PREP(S2MU005_CHGR_OVP, 2)
+
+/* S2MU005_REG_CHGR_STATUS2 */
+#define S2MU005_CHGR_BAT GENMASK(6, 4)
+
+#define S2MU005_CHGR_BAT_VOLT_DET FIELD_PREP(S2MU005_CHGR_BAT, 7)
+#define S2MU005_CHGR_BAT_FAST_CHG_DET FIELD_PREP(S2MU005_CHGR_BAT, 6)
+#define S2MU005_CHGR_BAT_COOL_CHG_DET FIELD_PREP(S2MU005_CHGR_BAT, 5)
+#define S2MU005_CHGR_BAT_LOW_CHG FIELD_PREP(S2MU005_CHGR_BAT, 2)
+#define S2MU005_CHGR_BAT_SELF_DISCHG FIELD_PREP(S2MU005_CHGR_BAT, 1)
+#define S2MU005_CHGR_BAT_OVP_DET FIELD_PREP(S2MU005_CHGR_BAT, 0)
+
+/* S2MU005_REG_CHGR_STATUS3 */
+#define S2MU005_CHGR_EVT GENMASK(3, 0)
+
+#define S2MU005_CHGR_EVT_WDT_RST FIELD_PREP(S2MU005_CHGR_EVT, 6)
+#define S2MU005_CHGR_EVT_WDT_SUSP FIELD_PREP(S2MU005_CHGR_EVT, 5)
+#define S2MU005_CHGR_EVT_VSYS_VUVLO FIELD_PREP(S2MU005_CHGR_EVT, 4)
+#define S2MU005_CHGR_EVT_VSYS_VOVP FIELD_PREP(S2MU005_CHGR_EVT, 3)
+#define S2MU005_CHGR_EVT_THERM_FOLDBACK FIELD_PREP(S2MU005_CHGR_EVT, 2)
+#define S2MU005_CHGR_EVT_THERM_SHUTDOWN FIELD_PREP(S2MU005_CHGR_EVT, 1)
+
+/* S2MU005_REG_CHGR_CTRL0 */
+#define S2MU005_CHGR_CHG_EN BIT(4)
+#define S2MU005_CHGR_OP_MODE GENMASK(2, 0)
+
+#define S2MU005_CHGR_OP_MODE_OTG FIELD_PREP(S2MU005_CHGR_OP_MODE, BIT(2))
+#define S2MU005_CHGR_OP_MODE_CHG FIELD_PREP(S2MU005_CHGR_OP_MODE, BIT(1))
+
+/* S2MU005_REG_CHGR_CTRL1 */
+#define S2MU005_CHGR_VIN_DROP GENMASK(6, 4)
+
+/* S2MU005_REG_CHGR_CTRL2 */
+#define S2MU005_CHGR_IN_CURR_LIM GENMASK(5, 0)
+
+/* S2MU005_REG_CHGR_CTRL4 */
+#define S2MU005_CHGR_OTG_OCP_ON BIT(5)
+#define S2MU005_CHGR_OTG_OCP_OFF BIT(4)
+#define S2MU005_CHGR_OTG_OCP GENMASK(3, 2)
+
+/* S2MU005_REG_CHGR_CTRL5 */
+#define S2MU005_CHGR_VMID_BOOST GENMASK(4, 0)
+
+/* S2MU005_REG_CHGR_CTRL6 */
+#define S2MU005_CHGR_COOL_CHG_CURR GENMASK(5, 0)
+
+/* S2MU005_REG_CHGR_CTRL7 */
+#define S2MU005_CHGR_FAST_CHG_CURR GENMASK(5, 0)
+
+/* S2MU005_REG_CHGR_CTRL8 */
+#define S2MU005_CHGR_VF_VBAT GENMASK(6, 1)
+
+/* S2MU005_REG_CHGR_CTRL10 */
+#define S2MU005_CHGR_TOPOFF_CURR(x) (GENMASK(3, 0) << 4 * (x))
+
+/* S2MU005_REG_CHGR_CTRL11 */
+#define S2MU005_CHGR_OSC_BOOST GENMASK(6, 5)
+#define S2MU005_CHGR_OSC_BUCK GENMASK(4, 3)
+
+/* S2MU005_REG_CHGR_CTRL12 */
+#define S2MU005_CHGR_WDT GENMASK(2, 0)
+
+#define S2MU005_CHGR_WDT_ON FIELD_PREP(S2MU005_CHGR_WDT, BIT(2))
+#define S2MU005_CHGR_WDT_OFF FIELD_PREP(S2MU005_CHGR_WDT, BIT(1))
+
+/* S2MU005_REG_CHGR_CTRL15 */
+#define S2MU005_CHGR_OTG_EN GENMASK(3, 2)
+
+/* S2MU005_REG_FLED_STATUS */
+#define S2MU005_FLED_FLASH_STATUS(x) (BIT(7) >> 2 * (x))
+#define S2MU005_FLED_TORCH_STATUS(x) (BIT(6) >> 2 * (x))
+
+/* S2MU005_REG_FLED_CHx_CTRL0 */
+#define S2MU005_FLED_FLASH_IOUT GENMASK(3, 0)
+
+/* S2MU005_REG_FLED_CHx_CTRL1 */
+#define S2MU005_FLED_TORCH_IOUT GENMASK(3, 0)
+
+/* S2MU005_REG_FLED_CHx_CTRL2 */
+#define S2MU005_FLED_TORCH_TIMEOUT GENMASK(3, 0)
+
+/* S2MU005_REG_FLED_CHx_CTRL3 */
+#define S2MU005_FLED_FLASH_TIMEOUT GENMASK(3, 0)
+
+/* S2MU005_REG_FLED_CTRL1 */
+#define S2MU005_FLED_CH_EN BIT(7)
+
+/*
+ * S2MU005_REG_FLED_CTRL4 - Rev. EVT0
+ * S2MU005_REG_FLED_CTRL6 - Rev. EVT1 and later
+ */
+#define S2MU005_FLED_FLASH_EN(x) (GENMASK(7, 6) >> 4 * (x))
+#define S2MU005_FLED_TORCH_EN(x) (GENMASK(5, 4) >> 4 * (x))
+
+/* S2MU005_REG_RGB_EN */
+#define S2MU005_RGB_RESET BIT(6)
+#define S2MU005_RGB_SLOPE GENMASK(5, 0)
+
+#define S2MU005_RGB_SLOPE_CONST (BIT(4) | BIT(2) | BIT(0))
+#define S2MU005_RGB_SLOPE_SMOOTH (BIT(5) | BIT(3) | BIT(1))
+
+/* S2MU005_REG_RGB_CHx_RAMP */
+#define S2MU005_RGB_CH_RAMP_UP GENMASK(7, 4)
+#define S2MU005_RGB_CH_RAMP_DN GENMASK(3, 0)
+
+/* S2MU005_REG_RGB_CHx_STAY */
+#define S2MU005_RGB_CH_STAY_HI GENMASK(7, 4)
+#define S2MU005_RGB_CH_STAY_LO GENMASK(3, 0)
+
+/* S2MU005_REG_MUIC_DEV1 */
+#define S2MU005_MUIC_OTG BIT(7)
+#define S2MU005_MUIC_DCP BIT(6)
+#define S2MU005_MUIC_CDP BIT(5)
+#define S2MU005_MUIC_T1_T2_CHG BIT(4)
+#define S2MU005_MUIC_UART BIT(3)
+#define S2MU005_MUIC_SDP BIT(2)
+#define S2MU005_MUIC_LANHUB BIT(1)
+#define S2MU005_MUIC_AUDIO BIT(0)
+
+/* S2MU005_REG_MUIC_DEV2 */
+#define S2MU005_MUIC_SDP_1P8S BIT(7)
+#define S2MU005_MUIC_AV BIT(6)
+#define S2MU005_MUIC_TTY BIT(5)
+#define S2MU005_MUIC_PPD BIT(4)
+#define S2MU005_MUIC_JIG_UART_OFF BIT(3)
+#define S2MU005_MUIC_JIG_UART_ON BIT(2)
+#define S2MU005_MUIC_JIG_USB_OFF BIT(1)
+#define S2MU005_MUIC_JIG_USB_ON BIT(0)
+
+/* S2MU005_REG_MUIC_DEV3 */
+#define S2MU005_MUIC_U200_CHG BIT(7)
+#define S2MU005_MUIC_VBUS_AV BIT(4)
+#define S2MU005_MUIC_VBUS_R255 BIT(1)
+#define S2MU005_MUIC_MHL BIT(0)
+
+/* S2MU005_REG_MUIC_DEVAPPLE */
+#define S2MU005_MUIC_APPLE_CHG_0P5A BIT(7)
+#define S2MU005_MUIC_APPLE_CHG_1P0A BIT(6)
+#define S2MU005_MUIC_APPLE_CHG_2P0A BIT(5)
+#define S2MU005_MUIC_APPLE_CHG_2P4A BIT(4)
+#define S2MU005_MUIC_SDP_DCD_OUT BIT(3)
+#define S2MU005_MUIC_RID_WAKEUP BIT(2)
+#define S2MU005_MUIC_VBUS_WAKEUP BIT(1)
+#define S2MU005_MUIC_BCV1P2_OR_OPEN BIT(0)
+
+/* S2MU005_REG_ID */
+#define S2MU005_ID_MASK GENMASK(3, 0)
+#define S2MU005_ID_SHIFT 0
+
+/* S2MU005_REG_MUIC_SWCTRL */
+#define S2MU005_MUIC_DM_DP GENMASK(7, 2)
+#define S2MU005_MUIC_JIG BIT(0)
+
+#define S2MU005_MUIC_DM_DP_UART FIELD_PREP(S2MU005_MUIC_DM_DP, 0x12)
+#define S2MU005_MUIC_DM_DP_USB FIELD_PREP(S2MU005_MUIC_DM_DP, 0x09)
+
+/* S2MU005_REG_MUIC_CTRL1 */
+#define S2MU005_MUIC_OPEN BIT(4)
+#define S2MU005_MUIC_RAW_DATA BIT(3)
+#define S2MU005_MUIC_MAN_SW BIT(2)
+#define S2MU005_MUIC_WAIT BIT(1)
+#define S2MU005_MUIC_IRQ BIT(0)
+
+/* S2MU005_REG_MUIC_CTRL3 */
+#define S2MU005_MUIC_ONESHOT_ADC BIT(2)
+
+/* S2MU005_REG_MUIC_LDOADC_L and S2MU005_REG_MUIC_LDOADC_H */
+#define S2MU005_MUIC_VSET GENMASK(4, 0)
+
+#define S2MU005_MUIC_VSET_3P0V FIELD_PREP(S2MU005_MUIC_VSET, 0x1f)
+#define S2MU005_MUIC_VSET_2P6V FIELD_PREP(S2MU005_MUIC_VSET, 0x0e)
+#define S2MU005_MUIC_VSET_2P4V FIELD_PREP(S2MU005_MUIC_VSET, 0x0c)
+#define S2MU005_MUIC_VSET_2P2V FIELD_PREP(S2MU005_MUIC_VSET, 0x0a)
+#define S2MU005_MUIC_VSET_2P0V FIELD_PREP(S2MU005_MUIC_VSET, 0x08)
+#define S2MU005_MUIC_VSET_1P5V FIELD_PREP(S2MU005_MUIC_VSET, 0x03)
+#define S2MU005_MUIC_VSET_1P4V FIELD_PREP(S2MU005_MUIC_VSET, 0x02)
+#define S2MU005_MUIC_VSET_1P2V FIELD_PREP(S2MU005_MUIC_VSET, 0x00)
+
+#endif /* __LINUX_MFD_S2MU005_H */
--
2.52.0
^ permalink raw reply related
* [PATCH v2 05/12] dt-bindings: mfd: s2mps11: add documentation for S2MU005 PMIC
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty
In-Reply-To: <20260126-s2mu005-pmic-v2-0-78f1a75f547a@disroot.org>
Samsung's S2MU005 PMIC includes subdevices for a charger, an MUIC (Micro
USB Interface Controller), and flash and RGB LED controllers.
Since regulators are not supported by this device, unmark this property
as required and instead set this in a per-device basis for ones which
need it.
Add the compatible and documentation for the S2MU005 PMIC. Also, add an
example for nodes for supported sub-devices, i.e. charger, extcon,
flash, and rgb.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
.../devicetree/bindings/mfd/samsung,s2mps11.yaml | 103 ++++++++++++++++++++-
1 file changed, 102 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
index 31d544a9c05ca..aef634ca2e36f 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml
@@ -27,12 +27,28 @@ properties:
- samsung,s2mps15-pmic
- samsung,s2mpu02-pmic
- samsung,s2mpu05-pmic
+ - samsung,s2mu005-pmic
clocks:
$ref: /schemas/clock/samsung,s2mps11.yaml
description:
Child node describing clock provider.
+ charger:
+ $ref: /schemas/power/supply/samsung,s2m-charger.yaml
+ description:
+ Child node describing battery charger device.
+
+ extcon:
+ $ref: /schemas/extcon/samsung,s2m-muic.yaml
+ description:
+ Child node describing extcon device.
+
+ flash:
+ $ref: /schemas/leds/samsung,s2m-flash.yaml
+ description:
+ Child node describing flash LEDs.
+
interrupts:
maxItems: 1
@@ -44,6 +60,11 @@ properties:
description:
List of child nodes that specify the regulators.
+ rgb:
+ $ref: /schemas/leds/samsung,s2m-rgb.yaml
+ description:
+ Child node describing RGB LEDs.
+
samsung,s2mps11-acokb-ground:
description: |
Indicates that ACOKB pin of S2MPS11 PMIC is connected to the ground so
@@ -65,7 +86,6 @@ properties:
required:
- compatible
- - regulators
additionalProperties: false
@@ -105,6 +125,8 @@ allOf:
regulators:
$ref: /schemas/regulator/samsung,s2mps11.yaml
samsung,s2mps11-wrstbi-ground: false
+ required:
+ - regulators
- if:
properties:
@@ -116,6 +138,8 @@ allOf:
regulators:
$ref: /schemas/regulator/samsung,s2mps13.yaml
samsung,s2mps11-acokb-ground: false
+ required:
+ - regulators
- if:
properties:
@@ -128,6 +152,8 @@ allOf:
$ref: /schemas/regulator/samsung,s2mps14.yaml
samsung,s2mps11-acokb-ground: false
samsung,s2mps11-wrstbi-ground: false
+ required:
+ - regulators
- if:
properties:
@@ -140,6 +166,8 @@ allOf:
$ref: /schemas/regulator/samsung,s2mps15.yaml
samsung,s2mps11-acokb-ground: false
samsung,s2mps11-wrstbi-ground: false
+ required:
+ - regulators
- if:
properties:
@@ -152,6 +180,8 @@ allOf:
$ref: /schemas/regulator/samsung,s2mpu02.yaml
samsung,s2mps11-acokb-ground: false
samsung,s2mps11-wrstbi-ground: false
+ required:
+ - regulators
- if:
properties:
@@ -164,6 +194,18 @@ allOf:
$ref: /schemas/regulator/samsung,s2mpu05.yaml
samsung,s2mps11-acokb-ground: false
samsung,s2mps11-wrstbi-ground: false
+ required:
+ - regulators
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: samsung,s2mu005-pmic
+ then:
+ properties:
+ samsung,s2mps11-acokb-ground: false
+ samsung,s2mps11-wrstbi-ground: false
examples:
- |
@@ -305,3 +347,62 @@ examples:
};
};
};
+
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@3d {
+ compatible = "samsung,s2mu005-pmic";
+ reg = <0x3d>;
+ interrupt-parent = <&gpa2>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+ charger {
+ compatible = "samsung,s2mu005-charger";
+ monitored-battery = <&battery>;
+ };
+
+ extcon {
+ compatible = "samsung,s2mu005-muic";
+
+ port {
+ muic_to_usb: endpoint {
+ remote-endpoint = <&usb_to_muic>;
+ };
+ };
+ };
+
+ flash {
+ compatible = "samsung,s2mu005-flash";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "back-cam:white:flash";
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_FLASH;
+ };
+
+ led@1 {
+ reg = <1>;
+ label = "front-cam:white:flash";
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_FLASH;
+ };
+ };
+
+ rgb {
+ compatible = "samsung,s2mu005-rgb";
+ label = "notification:rgb:indicator";
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_INDICATOR;
+ linux,default-trigger = "pattern";
+ };
+ };
+ };
--
2.52.0
^ permalink raw reply related
* [PATCH v2 04/12] dt-bindings: power: supply: document Samsung S2M series PMIC charger device
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty
In-Reply-To: <20260126-s2mu005-pmic-v2-0-78f1a75f547a@disroot.org>
Certain Samsung S2M series PMICs have a battery charger device which,
among other things, manages power interfacing of the USB port. It may
supply power, as done in USB OTG operation mode, or it may accept power
and redirect it to the battery fuelgauge for charging. Document this
device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
.../power/supply/samsung,s2mu005-charger.yaml | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/Documentation/devicetree/bindings/power/supply/samsung,s2mu005-charger.yaml b/Documentation/devicetree/bindings/power/supply/samsung,s2mu005-charger.yaml
new file mode 100644
index 0000000000000..9159a15e77c61
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/samsung,s2mu005-charger.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/samsung,s2mu005-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Battery Charger for Samsung S2M series PMICs
+
+maintainers:
+ - Kaustabh Chakraborty <kauschluss@disroot.org>
+
+description: |
+ The Samsung S2M series PMIC battery charger manages power interfacing
+ of the USB port. It may supply power, as done in USB OTG operation
+ mode, or it may accept power and redirect it to the battery fuelgauge
+ for charging.
+
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+ additional information and example.
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ enum:
+ - samsung,s2mu005-charger
+
+required:
+ - compatible
+
+unevaluatedProperties: false
--
2.52.0
^ permalink raw reply related
* [PATCH v2 03/12] dt-bindings: extcon: document Samsung S2M series PMIC extcon device
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty
In-Reply-To: <20260126-s2mu005-pmic-v2-0-78f1a75f547a@disroot.org>
Certain Samsung S2M series PMICs have a MUIC device which reports
various cable states by measuring the ID-GND resistance with an internal
ADC. Document the devicetree schema for this device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
.../bindings/extcon/samsung,s2mu005-muic.yaml | 35 ++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/Documentation/devicetree/bindings/extcon/samsung,s2mu005-muic.yaml b/Documentation/devicetree/bindings/extcon/samsung,s2mu005-muic.yaml
new file mode 100644
index 0000000000000..05828b7b5be13
--- /dev/null
+++ b/Documentation/devicetree/bindings/extcon/samsung,s2mu005-muic.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/samsung,s2mu005-muic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Extcon Device for Samsung S2M series PMICs
+
+maintainers:
+ - Kaustabh Chakraborty <kauschluss@disroot.org>
+
+description: |
+ The Samsung S2M series PMIC extcon device is a USB port accessory
+ detector. It reports multiple states depending on the ID-GND
+ resistance measured by an internal ADC.
+
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+ additional information and example.
+
+properties:
+ compatible:
+ enum:
+ - samsung,s2mu005-muic
+
+ port:
+ $ref: /schemas/graph.yaml#/properties/port
+
+required:
+ - compatible
+ - port
+
+additionalProperties: false
--
2.52.0
^ permalink raw reply related
* [PATCH v2 02/12] dt-bindings: leds: document Samsung S2M series PMIC RGB LED device
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty
In-Reply-To: <20260126-s2mu005-pmic-v2-0-78f1a75f547a@disroot.org>
Certain Samsung S2M series PMICs have a three-channel LED device with
independent brightness control for each channel, typically used as
status indicators in mobile phones. Document the devicetree schema from
this device.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
.../bindings/leds/samsung,s2mu005-rgb.yaml | 34 ++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/samsung,s2mu005-rgb.yaml b/Documentation/devicetree/bindings/leds/samsung,s2mu005-rgb.yaml
new file mode 100644
index 0000000000000..6806b6d869ff7
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/samsung,s2mu005-rgb.yaml
@@ -0,0 +1,34 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/samsung,s2mu005-rgb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RGB LED Controller for Samsung S2M series PMICs
+
+maintainers:
+ - Kaustabh Chakraborty <kauschluss@disroot.org>
+
+description: |
+ The Samsung S2M series PMIC RGB LED is a three-channel LED device with
+ 8-bit brightness control for each channel, typically used as status
+ indicators in mobile phones.
+
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+ additional information and example.
+
+allOf:
+ - $ref: common.yaml#
+
+properties:
+ compatible:
+ enum:
+ - samsung,s2mu005-rgb
+
+required:
+ - compatible
+
+unevaluatedProperties: false
--
2.52.0
^ permalink raw reply related
* [PATCH v2 01/12] dt-bindings: leds: document Samsung S2M series PMIC flash LED device
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty, Conor Dooley
In-Reply-To: <20260126-s2mu005-pmic-v2-0-78f1a75f547a@disroot.org>
Certain Samsung S2M series PMICs have a flash LED controller with
two LED channels, and with torch and flash control modes. Document the
devicetree schema for the device.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
.../bindings/leds/samsung,s2mu005-flash.yaml | 52 ++++++++++++++++++++++
1 file changed, 52 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/samsung,s2mu005-flash.yaml b/Documentation/devicetree/bindings/leds/samsung,s2mu005-flash.yaml
new file mode 100644
index 0000000000000..36051ab20509f
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/samsung,s2mu005-flash.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/samsung,s2mu005-flash.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Flash and Torch LED Controller for Samsung S2M series PMICs
+
+maintainers:
+ - Kaustabh Chakraborty <kauschluss@disroot.org>
+
+description: |
+ The Samsung S2M series PMIC flash LED has two led channels (typically
+ as back and front camera flashes), with support for both torch and
+ flash modes.
+
+ This is a part of device tree bindings for S2M and S5M family of Power
+ Management IC (PMIC).
+
+ See also Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml for
+ additional information and example.
+
+properties:
+ compatible:
+ enum:
+ - samsung,s2mu005-flash
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^led@[0-1]$":
+ type: object
+ $ref: common.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ reg:
+ enum: [0, 1]
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
--
2.52.0
^ permalink raw reply related
* [PATCH v2 00/12] Support for Samsung S2MU005 PMIC and its sub-devices
From: Kaustabh Chakraborty @ 2026-01-25 19:07 UTC (permalink / raw)
To: Lee Jones, Pavel Machek, Rob Herring, Krzysztof Kozlowski,
Conor Dooley, MyungJoo Ham, Chanwoo Choi, Sebastian Reichel,
Krzysztof Kozlowski, André Draszik, Alexandre Belloni,
Jonathan Corbet, Shuah Khan
Cc: linux-leds, devicetree, linux-kernel, linux-pm, linux-samsung-soc,
linux-rtc, linux-doc, Kaustabh Chakraborty, Conor Dooley
S2MU005 is an MFD chip manufactured by Samsung Electronics. This is
found in various devices manufactured by Samsung and others, including
all Exynos 7870 devices. It is known to have the following features:
1. Two LED channels with adjustable brightness for use as a torch, or a
flash strobe.
2. An RGB LED with 8-bit channels. Usually programmed as a notification
indicator.
3. An MUIC, which works with USB micro-B (and USB-C?). For the micro-B
variant though, it measures the ID-GND resistance using an internal
ADC.
4. A charger device, which reports if charger is online, voltage,
resistance, etc.
This patch series implements a lot of these features. Naturally, this
series touches upon a lot of subsystems. The 'parent' is the MFD driver,
so the subsystems have some form of dependency to the MFD driver, so
they are not separable.
Here are the subsystems corresponding to the patch numbers:
dt-bindings - 01, 02, 03, 04, 05
mfd - 05, 06, 07
led - 01, 02, 08, 09, 10
extcon - 03, 11
power - 04, 12
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
---
Changes in v2:
- Drop [v1 06/13], instead use regmap_irq_chip::get_irq_regs()
- Remove references to driver in devicetree commits (Conor Dooley)
- Propagate errors of sec_pmic_store_rev() (André Draszik)
- Fix documentation language errors (Randy Dunlap)
- Link to v1: https://lore.kernel.org/r/20251114-s2mu005-pmic-v1-0-9e3184d3a0c9@disroot.org
---
Kaustabh Chakraborty (12):
dt-bindings: leds: document Samsung S2M series PMIC flash LED device
dt-bindings: leds: document Samsung S2M series PMIC RGB LED device
dt-bindings: extcon: document Samsung S2M series PMIC extcon device
dt-bindings: power: supply: document Samsung S2M series PMIC charger device
dt-bindings: mfd: s2mps11: add documentation for S2MU005 PMIC
mfd: sec: add support for S2MU005 PMIC
mfd: sec: store hardware revision in sec_pmic_dev and add S2MU005 support
leds: flash: add support for Samsung S2M series PMIC flash LED device
leds: rgb: add support for Samsung S2M series PMIC RGB LED device
Documentation: leds: document pattern behavior of Samsung S2M series PMIC RGB LEDs
extcon: add support for Samsung S2M series PMIC extcon devices
power: supply: add support for Samsung S2M series PMIC charger device
.../bindings/extcon/samsung,s2mu005-muic.yaml | 35 ++
.../bindings/leds/samsung,s2mu005-flash.yaml | 52 +++
.../bindings/leds/samsung,s2mu005-rgb.yaml | 34 ++
.../devicetree/bindings/mfd/samsung,s2mps11.yaml | 103 ++++-
.../power/supply/samsung,s2mu005-charger.yaml | 35 ++
Documentation/leds/index.rst | 1 +
Documentation/leds/leds-s2m-rgb.rst | 60 +++
drivers/extcon/Kconfig | 10 +
drivers/extcon/Makefile | 1 +
drivers/extcon/extcon-s2m.c | 351 ++++++++++++++++
drivers/leds/flash/Kconfig | 12 +
drivers/leds/flash/Makefile | 1 +
drivers/leds/flash/leds-s2m-flash.c | 410 ++++++++++++++++++
drivers/leds/rgb/Kconfig | 11 +
drivers/leds/rgb/Makefile | 1 +
drivers/leds/rgb/leds-s2m-rgb.c | 460 +++++++++++++++++++++
drivers/mfd/sec-common.c | 57 ++-
drivers/mfd/sec-i2c.c | 12 +
drivers/mfd/sec-irq.c | 74 ++++
drivers/power/supply/Kconfig | 11 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/s2m-charger.c | 213 ++++++++++
include/linux/mfd/samsung/core.h | 2 +
include/linux/mfd/samsung/irq.h | 66 +++
include/linux/mfd/samsung/s2mu005.h | 328 +++++++++++++++
25 files changed, 2330 insertions(+), 11 deletions(-)
---
base-commit: ca3a02fda4da8e2c1cb6baee5d72352e9e2cfaea
change-id: 20251112-s2mu005-pmic-0c67fa6bac3c
Best regards,
--
Kaustabh Chakraborty <kauschluss@disroot.org>
^ permalink raw reply
* Re: [PATCH v1 07/10] dt-bindings: input: cpcap-pwrbutton: convert to schema
From: Rob Herring (Arm) @ 2026-01-25 16:43 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: Andy Shevchenko, Dixit Parmar, linux-rtc, Krzysztof Kozlowski,
Dmitry Torokhov, Pavel Machek, Lee Jones, Nuno Sá,
Tony Lindgren, Conor Dooley, linux-leds, devicetree,
David Lechner, linux-iio, Alexandre Belloni, Jonathan Cameron,
Mark Brown, Liam Girdwood, linux-kernel, linux-input
In-Reply-To: <20260125134302.45958-8-clamor95@gmail.com>
On Sun, 25 Jan 2026 15:42:59 +0200, Svyatoslav Ryhel wrote:
> Convert power button devicetree bindings for the Motorola CPCAP MFD from
> TXT to YAML format. This patch does not change any functionality; the
> bindings remain the same.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> .../bindings/input/cpcap-pwrbutton.txt | 20 ------------
> .../input/motorola,cpcap-pwrbutton.yaml | 32 +++++++++++++++++++
> 2 files changed, 32 insertions(+), 20 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
> create mode 100644 Documentation/devicetree/bindings/input/motorola,cpcap-pwrbutton.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/input/motorola,cpcap-pwrbutton.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Warning: Documentation/devicetree/bindings/leds/motorola,cpcap-leds.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Warning: Documentation/devicetree/bindings/mfd/motorola-cpcap.txt references a file that doesn't exist: Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
Warning: Documentation/devicetree/bindings/mfd/motorola-cpcap.txt references a file that doesn't exist: Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
Warning: Documentation/devicetree/bindings/mfd/motorola-cpcap.txt references a file that doesn't exist: Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
Warning: Documentation/devicetree/bindings/mfd/motorola-cpcap.txt references a file that doesn't exist: Documentation/devicetree/bindings/leds/leds-cpcap.txt
Warning: Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Warning: Documentation/devicetree/bindings/rtc/motorola,cpcap-rtc.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Documentation/devicetree/bindings/input/motorola,cpcap-pwrbutton.yaml: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Documentation/devicetree/bindings/leds/motorola,cpcap-leds.yaml: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Documentation/devicetree/bindings/mfd/motorola-cpcap.txt: Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
Documentation/devicetree/bindings/mfd/motorola-cpcap.txt: Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
Documentation/devicetree/bindings/mfd/motorola-cpcap.txt: Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
Documentation/devicetree/bindings/mfd/motorola-cpcap.txt: Documentation/devicetree/bindings/leds/leds-cpcap.txt
Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Documentation/devicetree/bindings/rtc/motorola,cpcap-rtc.yaml: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
See https://patchwork.kernel.org/project/devicetree/patch/20260125134302.45958-8-clamor95@gmail.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply
* Re: [PATCH v1 06/10] dt-bindings: rtc: cpcap-rtc: convert to schema
From: Rob Herring (Arm) @ 2026-01-25 16:28 UTC (permalink / raw)
To: Svyatoslav Ryhel
Cc: linux-input, Mark Brown, Krzysztof Kozlowski, linux-iio,
Nuno Sá, Liam Girdwood, linux-kernel, Alexandre Belloni,
devicetree, Conor Dooley, Jonathan Cameron, David Lechner,
Dmitry Torokhov, linux-leds, Dixit Parmar, linux-rtc,
Tony Lindgren, Lee Jones, Andy Shevchenko, Pavel Machek
In-Reply-To: <20260125134302.45958-7-clamor95@gmail.com>
On Sun, 25 Jan 2026 15:42:58 +0200, Svyatoslav Ryhel wrote:
> Convert RTC devicetree bindings for the Motorola CPCAP MFD from TXT to
> YAML format. This patch does not change any functionality; the bindings
> remain the same.
>
> Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> ---
> .../devicetree/bindings/rtc/cpcap-rtc.txt | 18 -----------
> .../bindings/rtc/motorola,cpcap-rtc.yaml | 32 +++++++++++++++++++
> 2 files changed, 32 insertions(+), 18 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
> create mode 100644 Documentation/devicetree/bindings/rtc/motorola,cpcap-rtc.yaml
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/leds/motorola,cpcap-leds.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Warning: Documentation/devicetree/bindings/mfd/motorola-cpcap.txt references a file that doesn't exist: Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
Warning: Documentation/devicetree/bindings/mfd/motorola-cpcap.txt references a file that doesn't exist: Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
Warning: Documentation/devicetree/bindings/mfd/motorola-cpcap.txt references a file that doesn't exist: Documentation/devicetree/bindings/leds/leds-cpcap.txt
Warning: Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Warning: Documentation/devicetree/bindings/rtc/motorola,cpcap-rtc.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Documentation/devicetree/bindings/leds/motorola,cpcap-leds.yaml: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Documentation/devicetree/bindings/mfd/motorola-cpcap.txt: Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
Documentation/devicetree/bindings/mfd/motorola-cpcap.txt: Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
Documentation/devicetree/bindings/mfd/motorola-cpcap.txt: Documentation/devicetree/bindings/leds/leds-cpcap.txt
Documentation/devicetree/bindings/regulator/motorola,cpcap-regulator.yaml: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
Documentation/devicetree/bindings/rtc/motorola,cpcap-rtc.yaml: Documentation/devicetree/bindings/mfd/motorola,cpcap.yaml
See https://patchwork.kernel.org/project/devicetree/patch/20260125134302.45958-7-clamor95@gmail.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox