From: David Hildenbrand <david@redhat.com>
To: linux-s390@vger.kernel.org, kvm@vger.kernel.org
Cc: Christian Borntraeger <borntraeger@de.ibm.com>,
Cornelia Huck <cohuck@redhat.com>,
Janosch Frank <frankja@linux.vnet.ibm.com>,
David Hildenbrand <david@redhat.com>
Subject: [PATCH RFC 4/6] KVM: s390: consider epoch index on TOD clock syncs
Date: Wed, 7 Feb 2018 12:46:45 +0100 [thread overview]
Message-ID: <20180207114647.6220-5-david@redhat.com> (raw)
In-Reply-To: <20180207114647.6220-1-david@redhat.com>
For now, we don't take care of over/underflows. Especially underflows
are critical:
Assume the epoch is currently 0 and we get a sync request for delta=1,
meaning the TOD is moved forward by 1 and we have to fix it up by
subtracting 1 from the epoch. Right now, this will leave the epoch
index untouched, resulting in epoch=-1, epoch_idx=0, which is wrong.
We have to take care of over and underflows, also for the VSIE case. So
let's factor out calculation into a separate function.
Signed-off-by: David Hildenbrand <david@redhat.com>
---
arch/s390/kvm/kvm-s390.c | 32 +++++++++++++++++++++++++++++---
1 file changed, 29 insertions(+), 3 deletions(-)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index d007b737cd4d..c2b62379049e 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -179,6 +179,28 @@ int kvm_arch_hardware_enable(void)
static void kvm_gmap_notifier(struct gmap *gmap, unsigned long start,
unsigned long end);
+static void kvm_clock_sync_scb(struct kvm_s390_sie_block *scb, u64 delta)
+{
+ u64 delta_idx = 0;
+
+ /*
+ * The TOD jumps by delta, we have to compensate this by adding
+ * -delta to the epoch.
+ */
+ delta = -delta;
+
+ /* sign-extension - we're adding to signed values below */
+ if ((s64)delta < 0)
+ delta_idx = 0xff;
+
+ scb->epoch += delta;
+ if (scb->ecd & ECD_MEF) {
+ scb->epdx += delta_idx;
+ if (scb->epoch < delta)
+ scb->epdx += 1;
+ }
+}
+
/*
* This callback is executed during stop_machine(). All CPUs are therefore
* temporarily stopped. In order not to change guest behavior, we have to
@@ -194,13 +216,17 @@ static int kvm_clock_sync(struct notifier_block *notifier, unsigned long val,
unsigned long long *delta = v;
list_for_each_entry(kvm, &vm_list, vm_list) {
- kvm->arch.epoch -= *delta;
kvm_for_each_vcpu(i, vcpu, kvm) {
- vcpu->arch.sie_block->epoch -= *delta;
+ kvm_clock_sync_scb(vcpu->arch.sie_block, *delta);
+ if (i == 0) {
+ kvm->arch.epoch = vcpu->arch.sie_block->epoch;
+ kvm->arch.epdx = vcpu->arch.sie_block->epdx;
+ }
if (vcpu->arch.cputm_enabled)
vcpu->arch.cputm_start += *delta;
if (vcpu->arch.vsie_block)
- vcpu->arch.vsie_block->epoch -= *delta;
+ kvm_clock_sync_scb(vcpu->arch.vsie_block,
+ *delta);
}
}
return NOTIFY_OK;
--
2.14.3
next prev parent reply other threads:[~2018-02-07 11:46 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-07 11:46 [PATCH RFC 0/6] KVM: s390: Multiple-epoch facility fixes David Hildenbrand
2018-02-07 11:46 ` [PATCH RFC 1/6] KVM: s390: take care of clock-comparator sign control David Hildenbrand
2018-02-07 13:47 ` Collin L. Walling
2018-02-07 13:58 ` David Hildenbrand
2018-02-07 14:06 ` Christian Borntraeger
2018-02-16 9:45 ` Christian Borntraeger
2018-02-07 11:46 ` [PATCH RFC 2/6] KVM: s390: provide only a single function for setting the tod David Hildenbrand
2018-02-07 20:13 ` Collin L. Walling
2018-02-07 20:15 ` Collin L. Walling
2018-02-07 21:42 ` David Hildenbrand
2018-02-07 11:46 ` [PATCH RFC 3/6] KVM: s390: consider epoch index on hotplugged CPUs David Hildenbrand
2018-02-15 13:09 ` Cornelia Huck
2018-02-16 9:50 ` Christian Borntraeger
2018-02-07 11:46 ` David Hildenbrand [this message]
2018-02-07 20:08 ` [PATCH RFC 4/6] KVM: s390: consider epoch index on TOD clock syncs Collin L. Walling
2018-02-07 21:35 ` David Hildenbrand
2018-02-07 22:43 ` Collin L. Walling
2018-02-08 12:15 ` David Hildenbrand
2018-02-07 11:46 ` [PATCH RFC 5/6] KVM: s390: no need to inititalize kvm->arch members to 0 David Hildenbrand
2018-02-15 13:25 ` Cornelia Huck
2018-02-07 11:46 ` [PATCH RFC 6/6] KVM: s390: generalize kvm_s390_get_tod_clock_ext() David Hildenbrand
2018-02-15 14:08 ` Cornelia Huck
2018-02-15 14:14 ` David Hildenbrand
2018-02-15 14:17 ` Cornelia Huck
2018-02-15 14:25 ` David Hildenbrand
2018-02-07 11:50 ` [PATCH RFC 0/6] KVM: s390: Multiple-epoch facility fixes David Hildenbrand
[not found] <b25f6e5e-a5e6-54fc-910e-ad2e6e83bbb1@redhat.com>
2018-02-20 15:56 ` [PATCH RFC 4/6] KVM: s390: consider epoch index on TOD clock syncs Christian Borntraeger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180207114647.6220-5-david@redhat.com \
--to=david@redhat.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=frankja@linux.vnet.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).