From: Halil Pasic <pasic@linux.ibm.com>
To: kvm@vger.kernel.org, linux-s390@vger.kernel.org,
Cornelia Huck <cohuck@redhat.com>,
Martin Schwidefsky <schwidefsky@de.ibm.com>,
Sebastian Ott <sebott@linux.ibm.com>
Cc: Halil Pasic <pasic@linux.ibm.com>,
virtualization@lists.linux-foundation.org,
Christian Borntraeger <borntraeger@de.ibm.com>,
Viktor Mihajlovski <mihajlov@linux.ibm.com>,
Vasily Gorbik <gor@linux.ibm.com>,
Janosch Frank <frankja@linux.ibm.com>,
Claudio Imbrenda <imbrenda@linux.ibm.com>,
Farhan Ali <alifm@linux.ibm.com>,
Eric Farman <farman@linux.ibm.com>
Subject: [RFC PATCH 08/12] virtio/s390: add indirection to indicators access
Date: Fri, 5 Apr 2019 01:16:18 +0200 [thread overview]
Message-ID: <20190404231622.52531-9-pasic@linux.ibm.com> (raw)
In-Reply-To: <20190404231622.52531-1-pasic@linux.ibm.com>
This will come in handy soon when we pull out the indicators from
virtio_ccw_device to a memory area that is shared with the hypervisor
(in particular for protected virtualization guests).
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
---
drivers/s390/virtio/virtio_ccw.c | 46 ++++++++++++++++++++++++----------------
1 file changed, 28 insertions(+), 18 deletions(-)
diff --git a/drivers/s390/virtio/virtio_ccw.c b/drivers/s390/virtio/virtio_ccw.c
index 9c412a581a50..156166ae4df4 100644
--- a/drivers/s390/virtio/virtio_ccw.c
+++ b/drivers/s390/virtio/virtio_ccw.c
@@ -71,6 +71,16 @@ struct virtio_ccw_device {
__u64 dma_mask;
};
+static inline unsigned long *indicators(struct virtio_ccw_device *vcdev)
+{
+ return &vcdev->indicators;
+}
+
+static inline unsigned long *indicators2(struct virtio_ccw_device *vcdev)
+{
+ return &vcdev->indicators2;
+}
+
struct vq_info_block_legacy {
__u64 queue;
__u32 align;
@@ -364,17 +374,17 @@ static void virtio_ccw_drop_indicator(struct virtio_ccw_device *vcdev,
} else {
/* payload is the address of the indicators */
indicatorp = __vc_dma_alloc(&vcdev->vdev,
- sizeof(&vcdev->indicators),
+ sizeof(indicators(vcdev)),
&indicatorp_dma_addr);
if (!indicatorp)
return;
*indicatorp = 0;
ccw->cmd_code = CCW_CMD_SET_IND;
- ccw->count = sizeof(&vcdev->indicators);
+ ccw->count = sizeof(indicators(vcdev));
ccw->cda = (__u32)(unsigned long) indicatorp;
}
/* Deregister indicators from host. */
- vcdev->indicators = 0;
+ *indicators(vcdev) = 0;
ccw->flags = 0;
ret = ccw_io_helper(vcdev, ccw,
vcdev->is_thinint ?
@@ -386,7 +396,7 @@ static void virtio_ccw_drop_indicator(struct virtio_ccw_device *vcdev,
else if (vcdev->is_thinint)
virtio_ccw_drop_indicators(vcdev);
if (indicatorp)
- __vc_dma_free(&vcdev->vdev, sizeof(&vcdev->indicators),
+ __vc_dma_free(&vcdev->vdev, sizeof(indicators(vcdev)),
indicatorp, indicatorp_dma_addr);
vc_dma_free_struct(&vcdev->vdev, thinint_area);
}
@@ -682,11 +692,11 @@ static int virtio_ccw_find_vqs(struct virtio_device *vdev, unsigned nvqs,
* We need a data area under 2G to communicate. Our payload is
* the address of the indicators.
*/
- indicatorp = __vc_dma_alloc(&vcdev->vdev, sizeof(&vcdev->indicators),
+ indicatorp = __vc_dma_alloc(&vcdev->vdev, sizeof(indicators(vcdev)),
&indicatorp_dma_addr);
if (!indicatorp)
goto out;
- *indicatorp = (unsigned long) &vcdev->indicators;
+ *indicatorp = (unsigned long) indicators(vcdev);
if (vcdev->is_thinint) {
ret = virtio_ccw_register_adapter_ind(vcdev, vqs, nvqs, ccw);
if (ret)
@@ -695,34 +705,34 @@ static int virtio_ccw_find_vqs(struct virtio_device *vdev, unsigned nvqs,
}
if (!vcdev->is_thinint) {
/* Register queue indicators with host. */
- vcdev->indicators = 0;
+ *indicators(vcdev) = 0;
ccw->cmd_code = CCW_CMD_SET_IND;
ccw->flags = 0;
- ccw->count = sizeof(&vcdev->indicators);
+ ccw->count = sizeof(indicators(vcdev));
ccw->cda = (__u32)(unsigned long) indicatorp;
ret = ccw_io_helper(vcdev, ccw, VIRTIO_CCW_DOING_SET_IND);
if (ret)
goto out;
}
/* Register indicators2 with host for config changes */
- *indicatorp = (unsigned long) &vcdev->indicators2;
- vcdev->indicators2 = 0;
+ *indicatorp = (unsigned long) indicators2(vcdev);
+ *indicators2(vcdev) = 0;
ccw->cmd_code = CCW_CMD_SET_CONF_IND;
ccw->flags = 0;
- ccw->count = sizeof(&vcdev->indicators2);
+ ccw->count = sizeof(indicators2(vcdev));
ccw->cda = (__u32)(unsigned long) indicatorp;
ret = ccw_io_helper(vcdev, ccw, VIRTIO_CCW_DOING_SET_CONF_IND);
if (ret)
goto out;
if (indicatorp)
- __vc_dma_free(&vcdev->vdev, sizeof(&vcdev->indicators),
+ __vc_dma_free(&vcdev->vdev, sizeof(indicators(vcdev)),
indicatorp, indicatorp_dma_addr);
vc_dma_free_struct(vdev, ccw);
return 0;
out:
if (indicatorp)
- __vc_dma_free(&vcdev->vdev, sizeof(&vcdev->indicators),
+ __vc_dma_free(&vcdev->vdev, sizeof(indicators(vcdev)),
indicatorp, indicatorp_dma_addr);
vc_dma_free_struct(vdev, ccw);
virtio_ccw_del_vqs(vdev);
@@ -1131,17 +1141,17 @@ static void virtio_ccw_int_handler(struct ccw_device *cdev,
vcdev->err = -EIO;
}
virtio_ccw_check_activity(vcdev, activity);
- for_each_set_bit(i, &vcdev->indicators,
- sizeof(vcdev->indicators) * BITS_PER_BYTE) {
+ for_each_set_bit(i, indicators(vcdev),
+ sizeof(*indicators(vcdev)) * BITS_PER_BYTE) {
/* The bit clear must happen before the vring kick. */
- clear_bit(i, &vcdev->indicators);
+ clear_bit(i, indicators(vcdev));
barrier();
vq = virtio_ccw_vq_by_ind(vcdev, i);
vring_interrupt(0, vq);
}
- if (test_bit(0, &vcdev->indicators2)) {
+ if (test_bit(0, indicators2(vcdev))) {
virtio_config_changed(&vcdev->vdev);
- clear_bit(0, &vcdev->indicators2);
+ clear_bit(0, indicators2(vcdev));
}
}
--
2.16.4
next prev parent reply other threads:[~2019-04-04 23:16 UTC|newest]
Thread overview: 60+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-04-04 23:16 [RFC PATCH 00/12] s390: virtio: support protected virtualization Halil Pasic
2019-04-04 23:16 ` [RFC PATCH 01/12] virtio/s390: use vring_create_virtqueue Halil Pasic
2019-04-08 11:01 ` Cornelia Huck
2019-04-08 12:37 ` Michael S. Tsirkin
2019-04-08 13:20 ` Halil Pasic
2019-04-04 23:16 ` [RFC PATCH 02/12] virtio/s390: DMA support for virtio-ccw Halil Pasic
2019-04-09 9:57 ` Cornelia Huck
2019-04-09 11:29 ` Halil Pasic
2019-04-09 13:01 ` Cornelia Huck
2019-04-09 13:23 ` Halil Pasic
2019-04-09 15:47 ` Cornelia Huck
2019-04-04 23:16 ` [RFC PATCH 03/12] s390/mm: force swiotlb for protected virtualization Halil Pasic
2019-04-09 10:16 ` Cornelia Huck
2019-04-09 10:54 ` Halil Pasic
2019-04-09 17:18 ` Cornelia Huck
2019-04-09 12:22 ` Christoph Hellwig
2019-04-09 12:39 ` Halil Pasic
2019-04-04 23:16 ` [RFC PATCH 04/12] s390/cio: introduce cio DMA pool Halil Pasic
2019-04-09 10:44 ` Cornelia Huck
2019-04-09 12:11 ` Halil Pasic
2019-04-09 17:14 ` Cornelia Huck
2019-04-10 15:31 ` Halil Pasic
2019-04-10 16:07 ` Cornelia Huck
2019-04-10 16:52 ` Halil Pasic
2019-04-11 18:25 ` Sebastian Ott
2019-04-12 11:20 ` Halil Pasic
2019-04-12 12:12 ` Sebastian Ott
2019-04-12 15:30 ` Halil Pasic
2019-04-16 12:50 ` Sebastian Ott
2019-04-16 13:31 ` Halil Pasic
2019-04-04 23:16 ` [RFC PATCH 05/12] s390/cio: add protected virtualization support to cio Halil Pasic
2019-04-09 17:55 ` Cornelia Huck
2019-04-10 0:10 ` Halil Pasic
2019-04-10 8:25 ` Cornelia Huck
2019-04-10 13:02 ` Halil Pasic
2019-04-10 16:16 ` Cornelia Huck
2019-04-11 14:15 ` Sebastian Ott
2019-04-12 11:29 ` Halil Pasic
2019-04-04 23:16 ` [RFC PATCH 06/12] s390/airq: use DMA memory for adapter interrupts Halil Pasic
2019-04-04 23:16 ` [RFC PATCH 07/12] virtio/s390: use DMA memory for ccw I/O Halil Pasic
2019-04-10 8:42 ` Cornelia Huck
2019-04-10 14:42 ` Halil Pasic
2019-04-10 16:21 ` Cornelia Huck
2019-04-04 23:16 ` Halil Pasic [this message]
2019-04-04 23:16 ` [RFC PATCH 09/12] virtio/s390: use DMA memory for notifiers Halil Pasic
2019-04-04 23:16 ` [RFC PATCH 10/12] virtio/s390: consolidate DMA allocations Halil Pasic
2019-04-10 8:46 ` Cornelia Huck
2019-04-10 15:12 ` Halil Pasic
2019-04-10 16:36 ` Cornelia Huck
2019-04-10 17:48 ` Halil Pasic
2019-04-11 9:24 ` Cornelia Huck
2019-04-11 10:10 ` Halil Pasic
2019-04-04 23:16 ` [RFC PATCH 11/12] virtio/s390: use the cio DMA pool Halil Pasic
2019-04-04 23:16 ` [RFC PATCH 12/12] virtio/s390: make airq summary indicators DMA Halil Pasic
2019-04-10 9:20 ` [RFC PATCH 00/12] s390: virtio: support protected virtualization Cornelia Huck
2019-04-10 15:57 ` Halil Pasic
2019-04-10 16:24 ` Cornelia Huck
2019-04-12 13:47 ` David Hildenbrand
2019-04-16 11:10 ` Halil Pasic
2019-04-16 11:50 ` David Hildenbrand
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190404231622.52531-9-pasic@linux.ibm.com \
--to=pasic@linux.ibm.com \
--cc=alifm@linux.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=farman@linux.ibm.com \
--cc=frankja@linux.ibm.com \
--cc=gor@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=mihajlov@linux.ibm.com \
--cc=schwidefsky@de.ibm.com \
--cc=sebott@linux.ibm.com \
--cc=virtualization@lists.linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).