[PATCH v2 30/79] docs: Debugging390.txt: convert table to ascii artwork

Mauro Carvalho Chehab
2019-04-22T13:27:19Z

The first bit/value table inside the document is very
hard to read and won't fit ReST format. Also, some columns aren't
properly aligned.

Convert it to a nice ascii artwork table with makes it easier to
read as plain text and is compatible with ReST format parser
on Sphinx.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
---
Documentation/s390/Debugging390.txt | 210 ++++++++++++++++------------
1 file changed, 120 insertions(+), 90 deletions(-)

diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt
index 5ae7f868a007..c35804c238ad 100644
--- a/Documentation/s390/Debugging390.txt
+++ b/Documentation/s390/Debugging390.txt
@@ -78,96 +78,126 @@ e.g. switching address translation off requires that you
have a logical=physical mapping for the address you are
currently running at.

- Bit Value
-s/390 z/Architecture
-0 0 Reserved ( must be 0 ) otherwise specification exception occurs.
-
-1 1 Program Event Recording 1 PER enabled,
- PER is used to facilitate debugging e.g. single stepping.
-
-2-4 2-4 Reserved ( must be 0 ).
-
-5 5 Dynamic address translation 1=DAT on.
-
-6 6 Input/Output interrupt Mask
-
-7 7 External interrupt Mask used primarily for interprocessor
- signalling and clock interrupts.
-
-8-11 8-11 PSW Key used for complex memory protection mechanism
- (not used under linux)
-
-12 12 1 on s/390 0 on z/Architecture
-
-13 13 Machine Check Mask 1=enable machine check interrupts
-
-14 14 Wait State. Set this to 1 to stop the processor except for
- interrupts and give time to other LPARS. Used in CPU idle in
- the kernel to increase overall usage of processor resources.
-
-15 15 Problem state ( if set to 1 certain instructions are disabled )
- all linux user programs run with this bit 1
- ( useful info for debugging under VM ).
-
-16-17 16-17 Address Space Control
-
- 00 Primary Space Mode:
- The register CR1 contains the primary address-space control ele-
- ment (PASCE), which points to the primary space region/segment
- table origin.
-
- 01 Access register mode
-
- 10 Secondary Space Mode:
- The register CR7 contains the secondary address-space control
- element (SASCE), which points to the secondary space region or
- segment table origin.
-
- 11 Home Space Mode:
- The register CR13 contains the home space address-space control
- element (HASCE), which points to the home space region/segment
- table origin.
-
- See "Address Spaces on Linux for s/390 & z/Architecture" below
- for more information about address space usage in Linux.
-
-18-19 18-19 Condition codes (CC)
-
-20 20 Fixed point overflow mask if 1=FPU exceptions for this event
- occur ( normally 0 )
-
-21 21 Decimal overflow mask if 1=FPU exceptions for this event occur
- ( normally 0 )
-
-22 22 Exponent underflow mask if 1=FPU exceptions for this event occur
- ( normally 0 )
-
-23 23 Significance Mask if 1=FPU exceptions for this event occur
- ( normally 0 )
-
-24-31 24-30 Reserved Must be 0.
-
- 31 Extended Addressing Mode
- 32 Basic Addressing Mode
- Used to set addressing mode
- PSW 31 PSW 32
- 0 0 24 bit
- 0 1 31 bit
- 1 1 64 bit
-
-32 1=31 bit addressing mode 0=24 bit addressing mode (for backward
- compatibility), linux always runs with this bit set to 1
-
-33-64 Instruction address.
- 33-63 Reserved must be 0
- 64-127 Address
- In 24 bits mode bits 64-103=0 bits 104-127 Address
- In 31 bits mode bits 64-96=0 bits 97-127 Address
- Note: unlike 31 bit mode on s/390 bit 96 must be zero
- when loading the address with LPSWE otherwise a
- specification exception occurs, LPSW is fully backward
- compatible.
-
++-------------------------+-------------------------------------------------+
+| Bit | |
++--------+----------------+ Value |
+| s/390 | z/Architecture | |
++========+================+=================================================+
+| 0 | 0 | Reserved (must be 0) otherwise specification |
+| | | exception occurs. |
++--------+----------------+-------------------------------------------------+
+| 1 | 1 | Program Event Recording 1 PER enabled, |
+| | | PER is used to facilitate debugging e.g. |
+| | | single stepping. |
++--------+----------------+-------------------------------------------------+
+| 2-4 | 2-4 | Reserved (must be 0). |
++--------+----------------+-------------------------------------------------+
+| 5 | 5 | Dynamic address translation 1=DAT on. |
++--------+----------------+-------------------------------------------------+
+| 6 | 6 | Input/Output interrupt Mask |
++--------+----------------+-------------------------------------------------+
+| 7 | 7 | External interrupt Mask used primarily for |
+| | | interprocessor signalling and clock interrupts. |
++--------+----------------+-------------------------------------------------+
+| 8-11 | 8-11 | PSW Key used for complex memory protection |
+| | | mechanism (not used under linux) |
++--------+----------------+-------------------------------------------------+
+| 12 | 12 | 1 on s/390 0 on z/Architecture |
++--------+----------------+-------------------------------------------------+
+| 13 | 13 | Machine Check Mask 1=enable machine check |
+| | | interrupts |
++--------+----------------+-------------------------------------------------+
+| 14 | 14 | Wait State. Set this to 1 to stop the processor |
+| | | except for interrupts and give time to other |
+| | | LPARS. Used in CPU idle in the kernel to |
+| | | increase overall usage of processor resources. |
++--------+----------------+-------------------------------------------------+
+| 15 | 15 | Problem state (if set to 1 certain instructions |
+| | | are disabled). All linux user programs run with |
+| | | this bit 1 (useful info for debugging under VM).|
++--------+----------------+-------------------------------------------------+
+| 16-17 | 16-17 | Address Space Control |
+| | | |
+| | | 00 Primary Space Mode: |
+| | | |
+| | | The register CR1 contains the primary |
+| | | address-space control element (PASCE), which |
+| | | points to the primary space region/segment |
+| | | table origin. |
+| | | |
+| | | 01 Access register mode |
+| | | |
+| | | 10 Secondary Space Mode: |
+| | | |
+| | | The register CR7 contains the secondary |
+| | | address-space control element (SASCE), which |
+| | | points to the secondary space region or |
+| | | segment table origin. |
+| | | |
+| | | 11 Home Space Mode: |
+| | | |
+| | | The register CR13 contains the home space |
+| | | address-space control element (HASCE), which |
+| | | points to the home space region/segment |
+| | | table origin. |
+| | | |
+| | | See "Address Spaces on Linux for s/390 & |
+| | | z/Architecture" below for more information |
+| | | about address space usage in Linux. |
++--------+----------------+-------------------------------------------------+
+| 18-19 | 18-19 | Condition codes (CC) |
++--------+----------------+-------------------------------------------------+
+| 20 | 20 | Fixed point overflow mask if 1=FPU exceptions |
+| | | for this event occur (normally 0) |
++--------+----------------+-------------------------------------------------+
+| 21 | 21 | Decimal overflow mask if 1=FPU exceptions for |
+| | | this event occur (normally 0) |
++--------+----------------+-------------------------------------------------+
+| 22 | 22 | Exponent underflow mask if 1=FPU exceptions |
+| | | for this event occur (normally 0) |
++--------+----------------+-------------------------------------------------+
+| 23 | 23 | Significance Mask if 1=FPU exceptions for this |
+| | | event occur (normally 0) |
++--------+----------------+-------------------------------------------------+
+| 24-31 | 24-30 | Reserved Must be 0. |
+| +----------------+-------------------------------------------------+
+| | 31 | Extended Addressing Mode |
+| +----------------+-------------------------------------------------+
+| | 32 | Basic Addressing Mode |
+| | | |
+| | | Used to set addressing mode |
+| | | |
+| | | +---------+----------+----------+ |
+| | | | PSW 31 | PSW 32 | | |
+| | | +---------+----------+----------+ |
+| | | | 0 | 0 | 24 bit | |
+| | | +---------+----------+----------+ |
+| | | | 0 | 1 | 31 bit | |
+| | | +---------+----------+----------+ |
+| | | | 1 | 1 | 64 bit | |
+| | | +---------+----------+----------+ |
++--------+----------------+-------------------------------------------------+
+| 32 | | 1=31 bit addressing mode 0=24 bit addressing |
+| | | mode (for backward compatibility), linux |
+| | | always runs with this bit set to 1 |
++--------+----------------+-------------------------------------------------+
+| 33-64 | | Instruction address. |
+| +----------------+-------------------------------------------------+
+| | 33-63 | Reserved must be 0 |
+| +----------------+-------------------------------------------------+
+| | 64-127 | Address |
+| | | |
+| | | - In 24 bits mode bits 64-103=0 bits 104-127 |
+| | | Address |
+| | | - In 31 bits mode bits 64-96=0 bits 97-127 |
+| | | Address |
+| | | |
+| | | Note: |
+| | | unlike 31 bit mode on s/390 bit 96 must be |
+| | | zero when loading the address with LPSWE |
+| | | otherwise a specification exception occurs, |
+| | | LPSW is fully backward compatible. |
++--------+----------------+-------------------------------------------------+

Prefix Page(s)
--------------
--
2.20.1