Re: [PATCH v6 1/7] s390: ap: kvm: add PQAP interception for AQIC

Tony Krowiak
2019-03-28T16:12:10Z

On 3/22/19 10:43 AM, Pierre Morel wrote:
> We prepare the interception of the PQAP/AQIC instruction for
> the case the AQIC facility is enabled in the guest.
>
> First of all we do not want to change existing behavior when
> intercepting AP instructions without the SIE allowing the guest
> to use AP instructions.
>
> In this patch we only handle the AQIC interception allowed by
> facility 65 which will be enabled when the complete interception
> infrastructure will be present.
>
> We add a callback inside the KVM arch structure for s390 for
> a VFIO driver to handle a specific response to the PQAP
> instruction with the AQIC command and only this command.
>
> But we want to be able to return a correct answer to the guest
> even there is no VFIO AP driver in the kernel.
> Therefor, we inject the correct exceptions from inside KVM for the
> case the callback is not initialized, which happens when the vfio_ap
> driver is not loaded.
>
> We do consider the responsability of the driver to always initialize
> the PQAP callback if it defines queues by initializing the CRYCB for
> a guest.
> If the callback has been setup we call it.
> If not we setup an answer considering that no queue is available
> for the guest when no callback has been setup.
>
> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
> ---
> arch/s390/include/asm/kvm_host.h | 8 ++++
> arch/s390/kvm/priv.c | 90 +++++++++++++++++++++++++++++++++++
> drivers/s390/crypto/vfio_ap_private.h | 2 +
> 3 files changed, 100 insertions(+)
>
> diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
> index a496276..624460b 100644
> --- a/arch/s390/include/asm/kvm_host.h
> +++ b/arch/s390/include/asm/kvm_host.h
> @@ -18,6 +18,7 @@
> #include <linux/kvm_host.h>
> #include <linux/kvm.h>
> #include <linux/seqlock.h>
> +#include <linux/module.h>
> #include <asm/debug.h>
> #include <asm/cpu.h>
> #include <asm/fpu/api.h>
> @@ -721,8 +722,15 @@ struct kvm_s390_cpu_model {
> unsigned short ibc;
> };
>
> +struct kvm_s390_module_hook {
> + int (*hook)(struct kvm_vcpu *vcpu);
> + void *data;
> + struct module *owner;
> +};
> +
> struct kvm_s390_crypto {
> struct kvm_s390_crypto_cb *crycb;
> + struct kvm_s390_module_hook *pqap_hook;
> __u32 crycbd;
> __u8 aes_kw;
> __u8 dea_kw;
> diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
> index 8679bd7..793e48a 100644
> --- a/arch/s390/kvm/priv.c
> +++ b/arch/s390/kvm/priv.c
> @@ -27,6 +27,7 @@
> #include <asm/io.h>
> #include <asm/ptrace.h>
> #include <asm/sclp.h>
> +#include <asm/ap.h>
> #include "gaccess.h"
> #include "kvm-s390.h"
> #include "trace.h"
> @@ -592,6 +593,93 @@ static int handle_io_inst(struct kvm_vcpu *vcpu)
> }
> }
>
> +/*
> + * handle_pqap: Handling pqap interception
> + * @vcpu: the vcpu having issue the pqap instruction
> + *
> + * We now support PQAP/AQIC instructions and we need to correctly
> + * answer the guest even if no dedicated driver's hook is available.
> + *
> + * The intercepting code calls a dedicated callback for this instruction
> + * if a driver did register one in the CRYPTO satellite of the
> + * SIE block.
> + *
> + * For PQAP AQIC and TAPQ instructions, verify privilege and specifications.
> + *
> + * If no callback available, the queues are not available, return this to
> + * the caller.
> + * Else return the value returned by the callback.
> + */
> +static int handle_pqap(struct kvm_vcpu *vcpu)
> +{
> + struct ap_queue_status status = {};
> + unsigned long reg0;
> + int ret;
> + uint8_t fc;
> +
> + /* Verify that the AP instruction are available */
> + if (!ap_instructions_available())
> + return -EOPNOTSUPP;
> + /* Verify that the guest is allowed to use AP instructions */
> + if (!(vcpu->arch.sie_block->eca & ECA_APIE))
> + return -EOPNOTSUPP;
> + /*
> + * The only possibly intercepted instructions when AP instructions are
> + * available for the guest are AQIC and TAPQ with the t bit set
> + * since we do not set IC.3 (FIII) we currently will not intercept
> + * TAPQ.
> + * The following code will only treat AQIC function code.
> + */
> + reg0 = vcpu->run->s.regs.gprs[0];
> + fc = reg0 >> 24;
> + if (fc != 0x03) {
> + pr_warn("%s: Unexpected interception code 0x%02x\n",
> + __func__, fc);
> + return -EOPNOTSUPP;
> + }
> + /* All PQAP instructions are allowed for guest kernel only */
> + if (vcpu->arch.sie_block->gpsw.mask & PSW_MASK_PSTATE)
> + return kvm_s390_inject_program_int(vcpu, PGM_PRIVILEGED_OP);
> + /*
> + * Common tests for PQAP instructions to generate a specification
> + * exception
> + */
> + /* Zero bits overwrite produce a specification exception */
> + if (reg0 & 0x007f0000UL)
> + goto specification_except;
> + /* If APXA is not installed APQN is limited */
> + if (!(vcpu->kvm->arch.crypto.crycbd & 0x02))
> + if (reg0 & 0x000030f0UL)
> + goto specification_except;
> + /* AQIC needs facility 65 */
> + if (!test_kvm_facility(vcpu->kvm, 65))
> + goto specification_except;
> +
> + /*
> + * Verify that the hook callback is registered, lock the owner
> + * and call the hook.
> + */
> + if (vcpu->kvm->arch.crypto.pqap_hook) {
> + if (!try_module_get(vcpu->kvm->arch.crypto.pqap_hook->owner))
> + return -EOPNOTSUPP;
> + ret = vcpu->kvm->arch.crypto.pqap_hook->hook(vcpu);
> + module_put(vcpu->kvm->arch.crypto.pqap_hook->owner);
> + return ret;
> + }
> + /*
> + * It is the duty of the vfio_driver to register a hook
> + * If it does not and we get an exception on AQIC we must
> + * guess that there is no vfio_ap_driver at all and no one
> + * to handle the guests's CRYCB and the CRYCB is empty.
> + */
> + status.response_code = 0x01;
> + memcpy(&vcpu->run->s.regs.gprs[1], &status, sizeof(status));
> + return 0;
> +
> +specification_except:
> + return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
> +}
> +
> static int handle_stfl(struct kvm_vcpu *vcpu)
> {
> int rc;
> @@ -878,6 +966,8 @@ int kvm_s390_handle_b2(struct kvm_vcpu *vcpu)
> return handle_sthyi(vcpu);
> case 0x7d:
> return handle_stsi(vcpu);
> + case 0xaf:
> + return handle_pqap(vcpu);
> case 0xb1:
> return handle_stfl(vcpu);
> case 0xb2:
> diff --git a/drivers/s390/crypto/vfio_ap_private.h b/drivers/s390/crypto/vfio_ap_private.h
> index 76b7f98..a910be1 100644
> --- a/drivers/s390/crypto/vfio_ap_private.h
> +++ b/drivers/s390/crypto/vfio_ap_private.h
> @@ -16,6 +16,7 @@
> #include <linux/mdev.h>
> #include <linux/delay.h>
> #include <linux/mutex.h>
> +#include <linux/kvm_host.h>
>
> #include "ap_bus.h"
>
> @@ -81,6 +82,7 @@ struct ap_matrix_mdev {
> struct ap_matrix matrix;
> struct notifier_block group_notifier;
> struct kvm *kvm;
> + struct kvm_s390_module_hook pqap_hook;

I don't understand the purpose of adding this field. We set up the
the kvm->arch.crypto.pqap_hook in the vfio_ap_mdev_set_kvm which is
also in this same file, why not just use a static struct
kvm_s390_module_hook and reuse it when setting up
kvm->arch.crypto.pqap_hook? It saves you from initializing it every
time an ap_matrix_mdev is created.

> };
>
> extern int vfio_ap_mdev_register(void);
>