From: Jongsun Han <jongsun.han@samsung.com>
To: linux-samsung-soc@vger.kernel.org
Cc: kgene.kim@samsung.com, ben-linux@fluff.org,
Jongsun Han <jongsun.han@samsung.com>
Subject: [PATCH 1/3] ARM: SAMSUNG: Add a helper function for I2C(3,4,5,6,7) platform devices
Date: Thu, 7 Oct 2010 20:15:30 +0900 [thread overview]
Message-ID: <1286450132-7985-2-git-send-email-jongsun.han@samsung.com> (raw)
In-Reply-To: <1286450132-7985-1-git-send-email-jongsun.han@samsung.com>
This patch adds a helper function for I2C(3,4,5,6,7) in dev-i2c.c.
I2C(0,1,2) helper functions and definitions are moved to dev-i2c.c and
dev-i2c(0,1,2).c are removed.
Signed-off-by: Jongsun Han <jongsun.han@samsung.com>
---
arch/arm/plat-samsung/Kconfig | 25 +++
arch/arm/plat-samsung/Makefile | 4 +-
arch/arm/plat-samsung/dev-i2c.c | 226 +++++++++++++++++++++++++++++
arch/arm/plat-samsung/dev-i2c0.c | 72 ---------
arch/arm/plat-samsung/dev-i2c1.c | 69 ---------
arch/arm/plat-samsung/dev-i2c2.c | 70 ---------
arch/arm/plat-samsung/include/plat/devs.h | 1 +
arch/arm/plat-samsung/include/plat/iic.h | 6 +
8 files changed, 259 insertions(+), 214 deletions(-)
create mode 100644 arch/arm/plat-samsung/dev-i2c.c
delete mode 100644 arch/arm/plat-samsung/dev-i2c0.c
delete mode 100644 arch/arm/plat-samsung/dev-i2c1.c
delete mode 100644 arch/arm/plat-samsung/dev-i2c2.c
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 7c0bde7..701f390 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -180,6 +180,31 @@ config S3C_DEV_I2C2
help
Compile in platform device definitions for I2C channel 2
+config S3C_DEV_I2C3
+ bool
+ help
+ Compile in platform device definitions for I2C channel 3
+
+config S3C_DEV_I2C4
+ bool
+ help
+ Compile in platform device definitions for I2C channel 4
+
+config S3C_DEV_I2C5
+ bool
+ help
+ Compile in platform device definitions for I2C channel 5
+
+config S3C_DEV_I2C6
+ bool
+ help
+ Compile in platform device definitions for I2C channel 6
+
+config S3C_DEV_I2C7
+ bool
+ help
+ Compile in platform device definitions for I2C channel 7
+
config S3C_DEV_FB
bool
help
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 4d8ff92..f8ef381 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -37,9 +37,7 @@ obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
obj-$(CONFIG_S3C_DEV_HSMMC3) += dev-hsmmc3.o
obj-$(CONFIG_S3C_DEV_HWMON) += dev-hwmon.o
-obj-y += dev-i2c0.o
-obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
-obj-$(CONFIG_S3C_DEV_I2C2) += dev-i2c2.o
+obj-y += dev-i2c.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
obj-y += dev-uart.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
diff --git a/arch/arm/plat-samsung/dev-i2c.c b/arch/arm/plat-samsung/dev-i2c.c
new file mode 100644
index 0000000..4ac0a6a
--- /dev/null
+++ b/arch/arm/plat-samsung/dev-i2c.c
@@ -0,0 +1,226 @@
+/* linux/arch/arm/plat-s3c/dev-i2c.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * I2C device definition for Samsung SOC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gfp.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/regs-iic.h>
+#include <plat/iic.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define S3C_ADD_I2C_RESOURCE(i2c_mem, i2c_irq) \
+ { \
+ .start = (i2c_mem), \
+ .end = (i2c_mem) + SZ_4K - 1, \
+ .flags = IORESOURCE_MEM, \
+ }, \
+ { \
+ .start = (i2c_irq), \
+ .end = (i2c_irq), \
+ .flags = IORESOURCE_IRQ, \
+ },
+
+static struct resource s3c_i2c_resource[][2] = {
+ { S3C_ADD_I2C_RESOURCE(S3C_PA_IIC, IRQ_IIC) },
+#ifdef CONFIG_S3C_DEV_I2C1
+ { S3C_ADD_I2C_RESOURCE(S3C_PA_IIC1, IRQ_IIC1) },
+#endif
+#ifdef CONFIG_S3C_DEV_I2C2
+ { S3C_ADD_I2C_RESOURCE(S3C_PA_IIC2, IRQ_IIC2) },
+#endif
+#ifdef CONFIG_S3C_DEV_I2C3
+ { S3C_ADD_I2C_RESOURCE(S3C_PA_IIC3, IRQ_IIC3) },
+#endif
+#ifdef CONFIG_S3C_DEV_I2C4
+ { S3C_ADD_I2C_RESOURCE(S3C_PA_IIC4, IRQ_IIC4) },
+#endif
+#ifdef CONFIG_S3C_DEV_I2C5
+ { S3C_ADD_I2C_RESOURCE(S3C_PA_IIC5, IRQ_IIC5) },
+#endif
+#ifdef CONFIG_S3C_DEV_I2C6
+ { S3C_ADD_I2C_RESOURCE(S3C_PA_IIC6, IRQ_IIC6) },
+#endif
+#ifdef CONFIG_S3C_DEV_I2C7
+ { S3C_ADD_I2C_RESOURCE(S3C_PA_IIC7, IRQ_IIC7) },
+#endif
+};
+
+#define S3C_ADD_I2C_PLATFORM(bus, freq, gpio) \
+ { \
+ .flags = 0, \
+ .bus_num = (bus), \
+ .slave_addr = 0x10, \
+ .frequency = (freq), \
+ .sda_delay = 100, \
+ .cfg_gpio = (gpio), \
+ }
+
+static struct s3c2410_platform_i2c default_i2c_data[] __initdata = {
+ S3C_ADD_I2C_PLATFORM(0, 100*1000, s3c_i2c0_cfg_gpio),
+#ifdef CONFIG_S3C_DEV_I2C1
+ S3C_ADD_I2C_PLATFORM(1, 100*1000, s3c_i2c1_cfg_gpio),
+#endif
+#ifdef CONFIG_S3C_DEV_I2C2
+ S3C_ADD_I2C_PLATFORM(2, 100*1000, s3c_i2c2_cfg_gpio),
+#endif
+#ifdef CONFIG_S3C_DEV_I2C3
+ S3C_ADD_I2C_PLATFORM(3, 100*1000, s3c_i2c3_cfg_gpio),
+#endif
+#ifdef CONFIG_S3C_DEV_I2C4
+ S3C_ADD_I2C_PLATFORM(4, 100*1000, s3c_i2c4_cfg_gpio),
+#endif
+#ifdef CONFIG_S3C_DEV_I2C5
+ S3C_ADD_I2C_PLATFORM(5, 100*1000, s3c_i2c5_cfg_gpio),
+#endif
+#ifdef CONFIG_S3C_DEV_I2C6
+ S3C_ADD_I2C_PLATFORM(6, 100*1000, s3c_i2c6_cfg_gpio),
+#endif
+#ifdef CONFIG_S3C_DEV_I2C7
+ S3C_ADD_I2C_PLATFORM(7, 100*1000, s3c_i2c7_cfg_gpio),
+#endif
+};
+
+static const char s3c_i2c_name[] = "s3c2410-i2c";
+
+#define S3C_ADD_I2C_DEVICE(i2c_id, res) \
+ { \
+ .name = s3c_i2c_name, \
+ .id = (i2c_id), \
+ .num_resources = ARRAY_SIZE(res), \
+ .resource = (res), \
+ }
+
+struct platform_device s3c_device_i2c[] = {
+#ifdef CONFIG_S3C_DEV_I2C1
+ S3C_ADD_I2C_DEVICE(0, s3c_i2c_resource[0]),
+ S3C_ADD_I2C_DEVICE(1, s3c_i2c_resource[1]),
+#else
+ S3C_ADD_I2C_DEVICE(-1, s3c_i2c_resource[0]),
+#endif
+#ifdef CONFIG_S3C_DEV_I2C2
+ S3C_ADD_I2C_DEVICE(2, s3c_i2c_resource[2]),
+#endif
+#ifdef CONFIG_S3C_DEV_I2C3
+ S3C_ADD_I2C_DEVICE(3, s3c_i2c_resource[3]),
+#endif
+#ifdef CONFIG_S3C_DEV_I2C4
+ S3C_ADD_I2C_DEVICE(4, s3c_i2c_resource[4]),
+#endif
+#ifdef CONFIG_S3C_DEV_I2C5
+ S3C_ADD_I2C_DEVICE(5, s3c_i2c_resource[5]),
+#endif
+#ifdef CONFIG_S3C_DEV_I2C6
+ S3C_ADD_I2C_DEVICE(6, s3c_i2c_resource[6]),
+#endif
+#ifdef CONFIG_S3C_DEV_I2C7
+ S3C_ADD_I2C_DEVICE(7, s3c_i2c_resource[7]),
+#endif
+};
+
+#define I2C_DEV_NUM ARRAY_SIZE(s3c_device_i2c)
+
+struct platform_device s3c_device_i2c0 = {
+ .name = "s3c2410-i2c",
+#ifdef CONFIG_S3C_DEV_I2C1
+ .id = 0,
+#else
+ .id = -1,
+#endif
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource[0]),
+ .resource = s3c_i2c_resource[0],
+};
+
+#ifdef CONFIG_S3C_DEV_I2C1
+struct platform_device s3c_device_i2c1 = {
+ .name = "s3c2410-i2c",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource[1]),
+ .resource = s3c_i2c_resource[1],
+};
+#endif
+
+#ifdef CONFIG_S3C_DEV_I2C2
+struct platform_device s3c_device_i2c2 = {
+ .name = "s3c2410-i2c",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s3c_i2c_resource[2]),
+ .resource = s3c_i2c_resource[2],
+};
+#endif
+
+void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data[0];
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+ s3c_device_i2c0.dev.platform_data = npd;
+}
+
+#ifdef CONFIG_S3C_DEV_I2C1
+void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data[1];
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+ s3c_device_i2c1.dev.platform_data = npd;
+}
+#endif
+
+#ifdef CONFIG_S3C_DEV_I2C2
+void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd;
+
+ if (!pd)
+ pd = &default_i2c_data[2];
+
+ npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+ s3c_device_i2c2.dev.platform_data = npd;
+}
+#endif
+
+void __init s3c_i2c_set_platdata(struct s3c2410_platform_i2c *pd)
+{
+ struct s3c2410_platform_i2c *npd[I2C_DEV_NUM];
+ int i;
+
+ for (i = 3; i < I2C_DEV_NUM; i++) {
+ if (!pd)
+ pd = &default_i2c_data[i];
+
+ npd[i] = kmemdup(pd, sizeof(struct s3c2410_platform_i2c)
+ , GFP_KERNEL);
+ s3c_device_i2c[i].dev.platform_data = npd[i];
+ pd = NULL;
+ }
+}
diff --git a/arch/arm/plat-samsung/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c
deleted file mode 100644
index 3a601c1..0000000
--- a/arch/arm/plat-samsung/dev-i2c0.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-i2c0.c
- *
- * Copyright 2008-2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for i2c device 0
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
- [0] = {
- .start = S3C_PA_IIC,
- .end = S3C_PA_IIC + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IIC,
- .end = IRQ_IIC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_i2c0 = {
- .name = "s3c2410-i2c",
-#ifdef CONFIG_S3C_DEV_I2C1
- .id = 0,
-#else
- .id = -1,
-#endif
- .num_resources = ARRAY_SIZE(s3c_i2c_resource),
- .resource = s3c_i2c_resource,
-};
-
-static struct s3c2410_platform_i2c default_i2c_data0 __initdata = {
- .flags = 0,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
-};
-
-void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd)
- pd = &default_i2c_data0;
-
- npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
- if (!npd)
- printk(KERN_ERR "%s: no memory for platform data\n", __func__);
- else if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c0_cfg_gpio;
-
- s3c_device_i2c0.dev.platform_data = npd;
-}
diff --git a/arch/arm/plat-samsung/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c
deleted file mode 100644
index 858ee2a..0000000
--- a/arch/arm/plat-samsung/dev-i2c1.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-i2c1.c
- *
- * Copyright 2008-2009 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C series device definition for i2c device 1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
- [0] = {
- .start = S3C_PA_IIC1,
- .end = S3C_PA_IIC1 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_IIC1,
- .end = IRQ_IIC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_i2c1 = {
- .name = "s3c2410-i2c",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c_i2c_resource),
- .resource = s3c_i2c_resource,
-};
-
-static struct s3c2410_platform_i2c default_i2c_data1 __initdata = {
- .flags = 0,
- .bus_num = 1,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
-};
-
-void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd)
- pd = &default_i2c_data1;
-
- npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
- if (!npd)
- printk(KERN_ERR "%s: no memory for platform data\n", __func__);
- else if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c1_cfg_gpio;
-
- s3c_device_i2c1.dev.platform_data = npd;
-}
diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c
deleted file mode 100644
index 07036de..0000000
--- a/arch/arm/plat-samsung/dev-i2c2.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/* linux/arch/arm/plat-s3c/dev-i2c2.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S3C series device definition for i2c device 2
- *
- * Based on plat-samsung/dev-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gfp.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/regs-iic.h>
-#include <plat/iic.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-
-static struct resource s3c_i2c_resource[] = {
- [0] = {
- .start = S3C_PA_IIC2,
- .end = S3C_PA_IIC2 + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_CAN0,
- .end = IRQ_CAN0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-struct platform_device s3c_device_i2c2 = {
- .name = "s3c2410-i2c",
- .id = 2,
- .num_resources = ARRAY_SIZE(s3c_i2c_resource),
- .resource = s3c_i2c_resource,
-};
-
-static struct s3c2410_platform_i2c default_i2c_data2 __initdata = {
- .flags = 0,
- .bus_num = 2,
- .slave_addr = 0x10,
- .frequency = 100*1000,
- .sda_delay = 100,
-};
-
-void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd)
-{
- struct s3c2410_platform_i2c *npd;
-
- if (!pd)
- pd = &default_i2c_data2;
-
- npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL);
- if (!npd)
- printk(KERN_ERR "%s: no memory for platform data\n", __func__);
- else if (!npd->cfg_gpio)
- npd->cfg_gpio = s3c_i2c2_cfg_gpio;
-
- s3c_device_i2c2.dev.platform_data = npd;
-}
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 7d448e1..b346957 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -46,6 +46,7 @@ extern struct platform_device s3c_device_wdt;
extern struct platform_device s3c_device_i2c0;
extern struct platform_device s3c_device_i2c1;
extern struct platform_device s3c_device_i2c2;
+extern struct platform_device s3c_device_i2c[];
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h
index 133308b..0fb9c6e 100644
--- a/arch/arm/plat-samsung/include/plat/iic.h
+++ b/arch/arm/plat-samsung/include/plat/iic.h
@@ -55,10 +55,16 @@ struct s3c2410_platform_i2c {
extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c);
extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c);
+extern void s3c_i2c_set_platdata(struct s3c2410_platform_i2c *i2c);
/* defined by architecture to configure gpio */
extern void s3c_i2c0_cfg_gpio(struct platform_device *dev);
extern void s3c_i2c1_cfg_gpio(struct platform_device *dev);
extern void s3c_i2c2_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c3_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c4_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c5_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c6_cfg_gpio(struct platform_device *dev);
+extern void s3c_i2c7_cfg_gpio(struct platform_device *dev);
#endif /* __ASM_ARCH_IIC_H */
--
1.6.3.3
next prev parent reply other threads:[~2010-10-07 11:24 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-07 11:15 [PATCH 0/3] ARM: S5PV310: Add I2C support Jongsun Han
2010-10-07 11:15 ` Jongsun Han [this message]
2010-10-07 11:15 ` [PATCH 2/3] ARM: S5PV310: Add address and IRQ definitions for I2C(1,2,3,4,5,6,7) Jongsun Han
2010-10-07 11:15 ` [PATCH 3/3] ARM: S5PV310: Add I2C(0,1,3,4,5,6,7) support Jongsun Han
2010-10-12 0:14 ` [PATCH 0/3] ARM: S5PV310: Add I2C support Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1286450132-7985-2-git-send-email-jongsun.han@samsung.com \
--to=jongsun.han@samsung.com \
--cc=ben-linux@fluff.org \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox