From: Tomasz Figa <tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Kukjin Kim" <kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
"Mark Brown" <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Mike Turquette"
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Arnd Bergmann" <arnd-r2nGTMty4D4@public.gmane.org>,
"Olof Johansson" <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>,
stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org,
gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Sylwester Nawrocki"
<sylvester.nawrocki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
"Thomas Abraham"
<thomas.abraham-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Tomasz Figa"
<tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v2 7/8] ARM: s3c64xx: Migrate clock handling to Common Clock Framework
Date: Tue, 23 Jul 2013 01:49:24 +0200 [thread overview]
Message-ID: <1374536965-3545-8-git-send-email-tomasz.figa@gmail.com> (raw)
In-Reply-To: <1374536965-3545-1-git-send-email-tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
This patch migrates the s3c64xx platform to use the new clock driver
using Common Clock Framework.
Signed-off-by: Tomasz Figa <tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
arch/arm/Kconfig | 2 +-
arch/arm/mach-s3c64xx/Makefile | 2 +-
arch/arm/mach-s3c64xx/common.c | 21 +++++++++++++++++----
arch/arm/mach-s3c64xx/common.h | 10 +++++-----
arch/arm/mach-s3c64xx/mach-anw6410.c | 2 +-
arch/arm/mach-s3c64xx/mach-crag6410.c | 2 +-
arch/arm/mach-s3c64xx/mach-hmt.c | 2 +-
arch/arm/mach-s3c64xx/mach-mini6410.c | 2 +-
arch/arm/mach-s3c64xx/mach-ncp.c | 2 +-
arch/arm/mach-s3c64xx/mach-smartq.c | 11 ++---------
arch/arm/mach-s3c64xx/mach-smdk6400.c | 2 +-
arch/arm/mach-s3c64xx/mach-smdk6410.c | 2 +-
arch/arm/mach-s3c64xx/s3c6400.c | 6 ------
arch/arm/mach-s3c64xx/s3c6410.c | 7 -------
drivers/clk/samsung/Makefile | 2 --
15 files changed, 33 insertions(+), 42 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index fa7ffca..cfa7e59 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -724,6 +724,7 @@ config ARCH_S3C64XX
select ARM_VIC
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
+ select COMMON_CLK
select CPU_V6
select GENERIC_CLOCKEVENTS
select GPIO_SAMSUNG
@@ -737,7 +738,6 @@ config ARCH_S3C64XX
select S3C_DEV_NAND
select S3C_GPIO_TRACK
select SAMSUNG_ATAGS
- select SAMSUNG_CLKSRC
select SAMSUNG_GPIOLIB_4BIT
select SAMSUNG_WDT_RESET
select USB_ARCH_HAS_OHCI
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index 31d0c91..645a8fe 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -12,7 +12,7 @@ obj- :=
# Core
-obj-y += common.o clock.o
+obj-y += common.o
# Core support
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index 73d79cf..7d3cb58 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -17,6 +17,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
+#include <linux/clk-provider.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
@@ -38,7 +39,6 @@
#include <mach/regs-gpio.h>
#include <plat/cpu.h>
-#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/pm.h>
#include <plat/gpio-cfg.h>
@@ -50,6 +50,19 @@
#include "common.h"
+/* External clock frequency */
+static unsigned long xtal_f = 12000000, xusbxti_f = 48000000;
+
+void __init s3c64xx_set_xtal_freq(unsigned long freq)
+{
+ xtal_f = freq;
+}
+
+void __init s3c64xx_set_xusbxti_freq(unsigned long freq)
+{
+ xusbxti_f = freq;
+}
+
/* uart registration process */
static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
@@ -67,7 +80,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = S3C6400_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6400_map_io,
- .init_clocks = s3c6400_init_clocks,
.init_uarts = s3c64xx_init_uarts,
.init = s3c6400_init,
.name = name_s3c6400,
@@ -75,7 +87,6 @@ static struct cpu_table cpu_ids[] __initdata = {
.idcode = S3C6410_CPU_ID,
.idmask = S3C64XX_CPU_MASK,
.map_io = s3c6410_map_io,
- .init_clocks = s3c6410_init_clocks,
.init_uarts = s3c64xx_init_uarts,
.init = s3c6410_init,
.name = name_s3c6410,
@@ -213,8 +224,10 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
{
/*
* FIXME: there is no better place to put this at the moment
- * (samsung_wdt_reset_init needs clocks)
+ * (s3c64xx_clk_init needs ioremap and must happen before init_time
+ * samsung_wdt_reset_init needs clocks)
*/
+ s3c64xx_clk_init(NULL, xtal_f, xusbxti_f, soc_is_s3c6400(), S3C_VA_SYS);
samsung_wdt_reset_init(S3C_VA_WATCHDOG);
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
diff --git a/arch/arm/mach-s3c64xx/common.h b/arch/arm/mach-s3c64xx/common.h
index e8f990b..a2af0e1 100644
--- a/arch/arm/mach-s3c64xx/common.h
+++ b/arch/arm/mach-s3c64xx/common.h
@@ -22,18 +22,19 @@
void s3c64xx_init_irq(u32 vic0, u32 vic1);
void s3c64xx_init_io(struct map_desc *mach_desc, int size);
-void s3c64xx_register_clocks(unsigned long xtal, unsigned armclk_limit);
-void s3c64xx_setup_clocks(void);
-
void s3c64xx_restart(enum reboot_mode mode, const char *cmd);
void s3c64xx_init_late(void);
+void s3c64xx_clk_init(struct device_node *np, unsigned long xtal_f,
+ unsigned long xusbxti_f, bool is_s3c6400, void __iomem *reg_base);
+void s3c64xx_set_xtal_freq(unsigned long freq);
+void s3c64xx_set_xusbxti_freq(unsigned long freq);
+
#ifdef CONFIG_CPU_S3C6400
extern int s3c6400_init(void);
extern void s3c6400_init_irq(void);
extern void s3c6400_map_io(void);
-extern void s3c6400_init_clocks(int xtal);
#else
#define s3c6400_init_clocks NULL
@@ -46,7 +47,6 @@ extern void s3c6400_init_clocks(int xtal);
extern int s3c6410_init(void);
extern void s3c6410_init_irq(void);
extern void s3c6410_map_io(void);
-extern void s3c6410_init_clocks(int xtal);
#else
#define s3c6410_init_clocks NULL
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index 35e3f54..d266dd5 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -207,7 +207,7 @@ static struct platform_device *anw6410_devices[] __initdata = {
static void __init anw6410_map_io(void)
{
s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index 28889cc..4d92e4d 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -743,7 +743,7 @@ static struct s3c2410_platform_i2c i2c1_pdata = {
static void __init crag6410_map_io(void)
{
s3c64xx_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index f39569e..e806404 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -247,7 +247,7 @@ static struct platform_device *hmt_devices[] __initdata = {
static void __init hmt_map_io(void)
{
s3c64xx_init_io(hmt_iodesc, ARRAY_SIZE(hmt_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(hmt_uartcfgs, ARRAY_SIZE(hmt_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 87f406e..3cceda2 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -231,7 +231,7 @@ static void __init mini6410_map_io(void)
u32 tmp;
s3c64xx_init_io(NULL, 0);
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(mini6410_uartcfgs, ARRAY_SIZE(mini6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 7e2c390..2067b0b 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -86,7 +86,7 @@ static struct map_desc ncp_iodesc[] __initdata = {};
static void __init ncp_map_io(void)
{
s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 86d980b..0f47237 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -337,13 +337,6 @@ err:
return ret;
}
-static int __init smartq_usb_otg_init(void)
-{
- clk_xusbxti.rate = 12000000;
-
- return 0;
-}
-
static int __init smartq_wifi_init(void)
{
int ret;
@@ -377,7 +370,8 @@ static struct map_desc smartq_iodesc[] __initdata = {};
void __init smartq_map_io(void)
{
s3c64xx_init_io(smartq_iodesc, ARRAY_SIZE(smartq_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
+ s3c64xx_set_xusbxti_freq(12000000);
s3c24xx_init_uarts(smartq_uartcfgs, ARRAY_SIZE(smartq_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
@@ -399,7 +393,6 @@ void __init smartq_machine_init(void)
WARN_ON(smartq_lcd_setup_gpio());
WARN_ON(smartq_power_off_init());
WARN_ON(smartq_usb_host_init());
- WARN_ON(smartq_usb_otg_init());
WARN_ON(smartq_wifi_init());
platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index d70c084..27381cf 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -65,7 +65,7 @@ static struct map_desc smdk6400_iodesc[] = {};
static void __init smdk6400_map_io(void)
{
s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
}
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index d90b450..2a7b32c 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -634,7 +634,7 @@ static void __init smdk6410_map_io(void)
u32 tmp;
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
- s3c24xx_init_clocks(12000000);
+ s3c64xx_set_xtal_freq(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c
index 4869714..331fe8e 100644
--- a/arch/arm/mach-s3c64xx/s3c6400.c
+++ b/arch/arm/mach-s3c64xx/s3c6400.c
@@ -58,12 +58,6 @@ void __init s3c6400_map_io(void)
s3c64xx_onenand1_setname("s3c6400-onenand");
}
-void __init s3c6400_init_clocks(int xtal)
-{
- s3c64xx_register_clocks(xtal, S3C6400_CLKDIV0_ARM_MASK);
- s3c64xx_setup_clocks();
-}
-
void __init s3c6400_init_irq(void)
{
/* VIC0 does not have IRQS 5..7,
diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c
index 31c29fd..7e6fa12 100644
--- a/arch/arm/mach-s3c64xx/s3c6410.c
+++ b/arch/arm/mach-s3c64xx/s3c6410.c
@@ -62,13 +62,6 @@ void __init s3c6410_map_io(void)
s3c_cfcon_setname("s3c64xx-pata");
}
-void __init s3c6410_init_clocks(int xtal)
-{
- printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
- s3c64xx_register_clocks(xtal, S3C6410_CLKDIV0_ARM_MASK);
- s3c64xx_setup_clocks();
-}
next prev parent reply other threads:[~2013-07-22 23:49 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-22 23:49 [PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx Tomasz Figa
2013-07-22 23:49 ` [PATCH v2 1/8] clk: mux: Add support for read-only muxes Tomasz Figa
[not found] ` <1374536965-3545-2-git-send-email-tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-07-23 11:22 ` Sergei Shtylyov
2013-07-23 11:25 ` Tomasz Figa
2013-07-27 12:41 ` Tomasz Figa
2013-08-02 21:46 ` Mike Turquette
2013-07-22 23:49 ` [PATCH v2 4/8] ARM: SAMSUNG: Add soc_is_s3c6400/s3c6410 macros Tomasz Figa
2013-07-22 23:49 ` [PATCH v2 5/8] ARM: s3c64xx: dma: Use clk_prepare_enable/clk_disable_unprepare Tomasz Figa
2013-07-28 12:32 ` Mark Brown
2013-07-22 23:49 ` [PATCH v2 8/8] ARM: s3c64xx: Remove old clock management code Tomasz Figa
2013-07-24 12:20 ` [PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx Kukjin Kim
[not found] ` <1374536965-3545-1-git-send-email-tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-07-22 23:49 ` [PATCH v2 2/8] clk: samsung: pll: Add support for PLL6552 and PLL6553 Tomasz Figa
2013-07-23 23:52 ` [PATCH v3 " Tomasz Figa
2013-07-28 12:30 ` Mark Brown
2013-07-28 12:38 ` Tomasz Figa
2013-08-02 22:53 ` Mike Turquette
2013-07-22 23:49 ` [PATCH v2 3/8] clk: samsung: Add clock driver for S3C64xx SoCs Tomasz Figa
2013-07-23 23:55 ` [PATCH v3 " Tomasz Figa
2013-07-22 23:49 ` [PATCH v2 6/8] usb: host: ohci-s3c2410 Use clk_prepare_enable/clk_disable_unprepare Tomasz Figa
2013-07-23 0:15 ` Fabio Estevam
[not found] ` <CAOMZO5D4X+GT+LdUOjorJ8xgBCwv9iAP4W-RzKrbnE-93kxmUg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2013-07-23 0:44 ` Tomasz Figa
[not found] ` <1374536965-3545-7-git-send-email-tomasz.figa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2013-07-31 18:58 ` Tomasz Figa
2013-07-31 20:44 ` Alan Stern
[not found] ` <Pine.LNX.4.44L0.1307311643110.1546-100000-IYeN2dnnYyZXsRXLowluHWD2FQJk+8+b@public.gmane.org>
2013-08-01 7:45 ` Greg KH
2013-07-22 23:49 ` Tomasz Figa [this message]
2013-08-05 17:01 ` [PATCH v2 0/8] Common Clock Framework support for Samsung S3C64xx Kukjin Kim
[not found] ` <51FFDA70.7080900-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-08-05 18:06 ` Mike Turquette
2013-08-05 18:13 ` Kukjin Kim
2013-08-05 19:02 ` Mike Turquette
2013-08-05 23:42 ` Tomasz Figa
2013-08-06 19:47 ` Mike Turquette
2013-08-06 22:06 ` Tomasz Figa
2013-08-06 22:11 ` Kukjin Kim
2013-08-06 22:13 ` Tomasz Figa
2013-08-16 10:44 ` Tomasz Figa
2013-08-16 21:02 ` Mike Turquette
2013-08-16 21:15 ` Tomasz Figa
2013-08-17 10:30 ` Kukjin Kim
2013-08-20 0:22 ` Mike Turquette
2013-08-20 7:09 ` Kukjin Kim
2013-08-25 17:19 ` Kukjin Kim
2013-08-21 0:33 ` [PATCH] clk: samsung: pll: Use new registration method for PLL6552 and PLL6553 Tomasz Figa
2013-08-27 1:14 ` Mike Turquette
2013-08-27 17:16 ` Kukjin Kim
2013-08-27 23:45 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374536965-3545-8-git-send-email-tomasz.figa@gmail.com \
--to=tomasz.figa-re5jqeeqqe8avxtiumwx3w@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=stern-nwvwT67g6+6dFdvTe/nMLpVzexx5G7lz@public.gmane.org \
--cc=sylvester.nawrocki-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=thomas.abraham-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox