From: Tomasz Figa <t.figa@samsung.com>
To: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
Kukjin Kim <kgene.kim@samsung.com>,
Mike Turquette <mturquette@linaro.org>,
Heiko Stuebner <heiko@sntech.de>,
Kyungmin Park <kyungmin.park@samsung.com>,
Rahul Sharma <rahul.sharma@samsung.com>,
Thomas Abraham <thomas.abraham@linaro.org>,
Tushar Behera <tushar.behera@linaro.org>,
Yadwinder Singh Brar <yadi.brar@samsung.com>,
Tomasz Figa <t.figa@samsung.com>
Subject: [PATCH 5/9] clk: samsung: exynos5420: Move suspend/resume handling to SoC driver
Date: Wed, 16 Oct 2013 13:08:14 +0200 [thread overview]
Message-ID: <1381921698-5060-6-git-send-email-t.figa@samsung.com> (raw)
In-Reply-To: <1381921698-5060-1-git-send-email-t.figa@samsung.com>
Since there are multiple differences in how suspend/resume of particular
Exynos SoCs must be handled, SoC driver is better place for
suspend/resume handlers and so this patch moves them.
Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
drivers/clk/samsung/clk-exynos5420.c | 49 ++++++++++++++++++++++++++++++++----
1 file changed, 44 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index 48c4a93..4ef1ee4 100644
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -15,6 +15,7 @@
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
#include "clk.h"
@@ -149,6 +150,11 @@ enum exynos5420_clks {
nr_clks,
};
+static void __iomem *reg_base;
+
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos5420_save;
+
/*
* list of controller registers to be saved and restored during a
* suspend/resume cycle.
@@ -215,6 +221,41 @@ static unsigned long exynos5420_clk_regs[] __initdata = {
DIV_KFC0,
};
+static int exynos5420_clk_suspend(void)
+{
+ samsung_clk_save(reg_base, exynos5420_save,
+ ARRAY_SIZE(exynos5420_clk_regs));
+
+ return 0;
+}
+
+static void exynos5420_clk_resume(void)
+{
+ samsung_clk_restore(reg_base, exynos5420_save,
+ ARRAY_SIZE(exynos5420_clk_regs));
+}
+
+static struct syscore_ops exynos5420_clk_syscore_ops = {
+ .suspend = exynos5420_clk_suspend,
+ .resume = exynos5420_clk_resume,
+};
+
+static void exynos5420_clk_sleep_init(void)
+{
+ exynos5420_save = samsung_clk_alloc_reg_dump(exynos5420_clk_regs,
+ ARRAY_SIZE(exynos5420_clk_regs));
+ if (!exynos5420_save) {
+ pr_warn("%s: failed to allocate sleep save data, no sleep support!\n",
+ __func__);
+ return;
+ }
+
+ register_syscore_ops(&exynos5420_clk_syscore_ops);
+}
+#else
+static void exynos5420_clk_sleep_init(void) {}
+#endif
+
/* list of all parent clocks */
PNAME(mspll_cpu_p) = { "sclk_cpll", "sclk_dpll",
"sclk_mpll", "sclk_spll" };
@@ -767,8 +808,6 @@ static struct of_device_id ext_clk_match[] __initdata = {
/* register exynos5420 clocks */
static void __init exynos5420_clk_init(struct device_node *np)
{
- void __iomem *reg_base;
-
if (np) {
reg_base = of_iomap(np, 0);
if (!reg_base)
@@ -777,9 +816,7 @@ static void __init exynos5420_clk_init(struct device_node *np)
panic("%s: unable to determine soc\n", __func__);
}
- samsung_clk_init(np, reg_base, nr_clks,
- exynos5420_clk_regs, ARRAY_SIZE(exynos5420_clk_regs),
- NULL, 0);
+ samsung_clk_init(np, reg_base, nr_clks, NULL, 0, NULL, 0);
samsung_clk_of_register_fixed_ext(exynos5420_fixed_rate_ext_clks,
ARRAY_SIZE(exynos5420_fixed_rate_ext_clks),
ext_clk_match);
@@ -795,5 +832,7 @@ static void __init exynos5420_clk_init(struct device_node *np)
ARRAY_SIZE(exynos5420_div_clks));
samsung_clk_register_gate(exynos5420_gate_clks,
ARRAY_SIZE(exynos5420_gate_clks));
+
+ exynos5420_clk_sleep_init();
}
CLK_OF_DECLARE(exynos5420_clk, "samsung,exynos5420-clock", exynos5420_clk_init);
--
1.8.3.2
next prev parent reply other threads:[~2013-10-16 11:08 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-16 11:08 [PATCH 0/9] Samsung clock PM consolidation part 1 Tomasz Figa
2013-10-16 11:08 ` [PATCH 1/9] clk: exynos4: Remove remnants of non-DT support Tomasz Figa
2013-10-16 11:08 ` [PATCH 2/9] clk: samsung: Provide common helpers for register save/restore Tomasz Figa
2013-10-16 11:08 ` [PATCH 3/9] clk: samsung: exynos4: Move suspend/resume handling to SoC driver Tomasz Figa
2013-10-17 13:42 ` Yadwinder Singh Brar
2013-10-17 14:16 ` Tomasz Figa
2013-10-17 14:22 ` Yadwinder Singh Brar
2013-10-16 11:08 ` [PATCH 4/9] clk: samsung: exynos5250: " Tomasz Figa
2013-10-16 11:08 ` Tomasz Figa [this message]
2013-10-16 11:08 ` [PATCH 6/9] clk: samsung: s3c64xx: " Tomasz Figa
2013-10-16 11:08 ` [PATCH 7/9] clk: samsung: Drop old suspend/resume code Tomasz Figa
2013-10-16 11:08 ` [PATCH 8/9] clk: samsung: exynos4: Add remaining suspend/resume handling Tomasz Figa
2013-10-16 11:08 ` [PATCH 9/9] ARM: EXYNOS: pm: Drop legacy Exynos4 clock suspend/resume code Tomasz Figa
2014-02-05 4:45 ` [PATCH 0/9] Samsung clock PM consolidation part 1 Rahul Sharma
2014-02-05 6:10 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1381921698-5060-6-git-send-email-t.figa@samsung.com \
--to=t.figa@samsung.com \
--cc=heiko@sntech.de \
--cc=kgene.kim@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=rahul.sharma@samsung.com \
--cc=thomas.abraham@linaro.org \
--cc=tushar.behera@linaro.org \
--cc=yadi.brar@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox