From: Majunath Goudar <csmanjuvijay@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Greg KH <greg@kroah.com>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Majunath Goudar <csmanjuvijay@gmail.com>,
Kukjin Kim <kgene.kim@samsung.com>,
nataraja.km@lge.com
Subject: [PATCH 5/6] USB: OHCI: Properly handle ohci-exynos suspend
Date: Wed, 13 Nov 2013 17:40:20 +0530 [thread overview]
Message-ID: <1384344621-6981-6-git-send-email-csmanjuvijay@gmail.com> (raw)
In-Reply-To: <1384344621-6981-1-git-send-email-csmanjuvijay@gmail.com>
Suspend scenario in case of ohci-exynos glue was not
properly handled as it was not suspending generic part
of ohci controller. Alan Stern suggested, properly handle
ohci-exynos suspend scenario.
Calling explicitly the ohci_suspend() routine in
exynos_ohci_suspend() will ensure proper handling of suspend
scenario.
Signed-off-by: Manjunath Goudar <csmanjuvijay@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg KH <greg@kroah.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-usb@vger.kernel.org
---
drivers/usb/host/ohci-exynos.c | 22 ++++++----------------
1 file changed, 6 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index a87baed..4b5c8bd 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -192,23 +192,14 @@ static int exynos_ohci_suspend(struct device *dev)
struct exynos_ohci_hcd *exynos_ohci = to_exynos_ohci(hcd);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
struct platform_device *pdev = to_platform_device(dev);
+ bool do_wakeup = device_may_wakeup(dev);
unsigned long flags;
- int rc = 0;
+ int rc = ohci_suspend(hcd, do_wakeup);
- /*
- * Root hub was already suspended. Disable irq emission and
- * mark HW unaccessible, bail out if RH has been resumed. Use
- * the spinlock to properly synchronize with possible pending
- * RH suspend or resume activity.
- */
- spin_lock_irqsave(&ohci->lock, flags);
- if (ohci->rh_state != OHCI_RH_SUSPENDED &&
- ohci->rh_state != OHCI_RH_HALTED) {
- rc = -EINVAL;
- goto fail;
- }
+ if (rc)
+ return rc;
- clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ spin_lock_irqsave(&ohci->lock, flags);
if (exynos_ohci->otg)
exynos_ohci->otg->set_host(exynos_ohci->otg, &hcd->self);
@@ -217,10 +208,9 @@ static int exynos_ohci_suspend(struct device *dev)
clk_disable_unprepare(exynos_ohci->clk);
-fail:
spin_unlock_irqrestore(&ohci->lock, flags);
- return rc;
+ return 0;
}
static int exynos_ohci_resume(struct device *dev)
--
1.7.9.5
prev parent reply other threads:[~2013-11-13 12:10 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1380708947-15966-1-git-send-email-csmanjuvijay@gmail.com>
[not found] ` <1382016913-10872-1-git-send-email-csmanjuvijay@gmail.com>
2013-10-17 13:35 ` [PATCH V3 3/6] USB: OHCI: Properly handle ohci-s3c2410 suspend Majunath Goudar
2013-10-17 13:35 ` [PATCH V3 5/6] USB: OHCI: Properly handle ohci-exynos suspend Majunath Goudar
[not found] ` <1382094376-31016-1-git-send-email-csmanjuvijay@gmail.com>
2013-10-18 11:06 ` [PATCH V3 3/6] USB: OHCI: Properly handle ohci-s3c2410 suspend Majunath Goudar
2013-10-18 11:06 ` [PATCH V3 5/6] USB: OHCI: Properly handle ohci-exynos suspend Majunath Goudar
[not found] ` <1382365136-24472-1-git-send-email-csmanjuvijay@gmail.com>
2013-10-21 14:18 ` [PATCH V4 3/6] USB: OHCI: Properly handle ohci-s3c2410 suspend Majunath Goudar
2013-10-21 14:18 ` [PATCH V4 5/6] USB: OHCI: Properly handle ohci-exynos suspend Majunath Goudar
[not found] ` <1384344621-6981-1-git-send-email-csmanjuvijay@gmail.com>
2013-11-13 12:10 ` [PATCH 3/6] USB: OHCI: Properly handle ohci-s3c2410 suspend Majunath Goudar
2013-11-13 12:10 ` Majunath Goudar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384344621-6981-6-git-send-email-csmanjuvijay@gmail.com \
--to=csmanjuvijay@gmail.com \
--cc=arnd@arndb.de \
--cc=greg@kroah.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nataraja.km@lge.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox