From mboxrd@z Thu Jan 1 00:00:00 1970 From: Krzysztof Kozlowski Subject: Re: [PATCH 08/14] mfd: sec: Add support for S2MPS14 Date: Wed, 12 Feb 2014 11:03:37 +0100 Message-ID: <1392199417.22265.12.camel@AMDC1943> References: <1392123837-5517-1-git-send-email-k.kozlowski@samsung.com> <1392123837-5517-9-git-send-email-k.kozlowski@samsung.com> <20140212091724.GS15081@lee--X1> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit Return-path: In-reply-to: <20140212091724.GS15081@lee--X1> Sender: linux-kernel-owner@vger.kernel.org To: Lee Jones Cc: Sangbeom Kim , Samuel Ortiz , linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org, Kyungmin Park , Marek Szyprowski , Bartlomiej Zolnierkiewicz List-Id: linux-samsung-soc@vger.kernel.org On Wed, 2014-02-12 at 09:17 +0000, Lee Jones wrote: > > Add support for S2MPS14 PMIC device to the MFD sec-core driver. > > The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two > > clocks instead of three and a little different registers layout. > > > > Signed-off-by: Krzysztof Kozlowski > > --- > > drivers/mfd/sec-core.c | 48 +++++++++-- > > drivers/mfd/sec-irq.c | 89 +++++++++++++++++++- > > include/linux/mfd/samsung/core.h | 1 + > > include/linux/mfd/samsung/irq.h | 27 +++++++ > > include/linux/mfd/samsung/rtc.h | 56 +++++++++++-- > > include/linux/mfd/samsung/s2mps14.h | 152 +++++++++++++++++++++++++++++++++++ > > 6 files changed, 361 insertions(+), 12 deletions(-) > > create mode 100644 include/linux/mfd/samsung/s2mps14.h > > > > diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c > > > > > +static const struct mfd_cell s2mps14_devs[] = { > > + { > > + .name = "s2mps14-pmic", > > + }, { > > + .name = "s2mps14-rtc", > > + }, { > > + .name = "s2mps14-clk", > > + } > > +}; > > No device tree support for the children? There aren't any compatibles also for other devices (s2mps11, s5m876X) so I didn't want to introduce different behavior for S2MPS14. If you want of_compatible here then it should be added for all devices. > > > > > +#define S2MPS14_LDO_VSEL_MASK 0x3F > > +#define S2MPS14_BUCK_VSEL_MASK 0xFF > > +#define S2MPS14_ENABLE_MASK (0x03 << S2MPS14_ENABLE_SHIFT) > > +#define S2MPS14_ENABLE_SHIFT 6 > > +#define S2MPS14_LDO_N_VOLTAGES (S2MPS14_LDO_VSEL_MASK + 1) > > +#define S2MPS14_BUCK_N_VOLTAGES (S2MPS14_BUCK_VSEL_MASK + 1) > > Nit: Can you line these up using tabs please? > Sure.