public inbox for linux-samsung-soc@vger.kernel.org
 help / color / mirror / Atom feed
From: Andrzej Hajda <a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: Andrzej Hajda <a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Kyungmin Park
	<kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Sean Paul <seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	Marek Szyprowski
	<m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Subject: [RFC PATCH v2 08/21] drm/panel: add TC358764 driver
Date: Wed, 12 Feb 2014 12:31:15 +0100	[thread overview]
Message-ID: <1392204688-4591-9-git-send-email-a.hajda@samsung.com> (raw)
In-Reply-To: <1392204688-4591-1-git-send-email-a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>

The patch adds driver for Toshiba DSI/LVDS TC358764 bridge.
Driver registers itself as mipi_dsi_driver. It is exposed to the
system via drm_panel interface, it uses also drm_panel framework
to interact with LVDS panel connected to it.
Driver supports only DT bindings.

Signed-off-by: Andrzej Hajda <a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
 drivers/gpu/drm/panel/Kconfig          |   7 +
 drivers/gpu/drm/panel/Makefile         |   1 +
 drivers/gpu/drm/panel/panel-tc358764.c | 505 +++++++++++++++++++++++++++++++++
 3 files changed, 513 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-tc358764.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 7527557..b98a485 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -23,4 +23,11 @@ config DRM_PANEL_S6E8AA0
 	select DRM_MIPI_DSI
 	select VIDEOMODE_HELPERS
 
+config DRM_PANEL_TC358764
+	tristate "TC358764 DSI/LVDS bridge"
+	depends on DRM && DRM_PANEL
+	depends on OF
+	select DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+
 endmenu
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 181265b..7cbb0cf 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -1,2 +1,3 @@
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
 obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
+obj-$(CONFIG_DRM_PANEL_TC358764) += panel-tc358764.o
diff --git a/drivers/gpu/drm/panel/panel-tc358764.c b/drivers/gpu/drm/panel/panel-tc358764.c
new file mode 100644
index 0000000..f9c1289
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-tc358764.c
@@ -0,0 +1,505 @@
+/*
+ * TC358764 MIPI-DSI to LVDS bridge panel driver.
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd
+ *
+ * Andrzej Hajda <a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <drm/drmP.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+#define FLD_MASK(start, end)    (((1 << ((start) - (end) + 1)) - 1) << (end))
+#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end))
+
+/* PPI layer registers */
+#define PPI_STARTPPI		0x0104 /* START control bit */
+#define PPI_LPTXTIMECNT		0x0114 /* LPTX timing signal */
+#define PPI_LANEENABLE		0x0134 /* Enables each lane */
+#define PPI_TX_RX_TA		0x013C /* BTA timing parameters */
+#define PPI_D0S_CLRSIPOCOUNT	0x0164 /* Assertion timer for Lane 0 */
+#define PPI_D1S_CLRSIPOCOUNT	0x0168 /* Assertion timer for Lane 1 */
+#define PPI_D2S_CLRSIPOCOUNT	0x016C /* Assertion timer for Lane 2 */
+#define PPI_D3S_CLRSIPOCOUNT	0x0170 /* Assertion timer for Lane 3 */
+
+/* DSI layer registers */
+#define DSI_STARTDSI		0x0204 /* START control bit of DSI-TX */
+#define DSI_LANEENABLE		0x0210 /* Enables each lane */
+
+/* Video path registers */
+#define VP_CTRL			0x0450 /* Video Path Control */
+#define VP_CTRL_MSF(v)		FLD_VAL(v, 0, 0) /* Magic square in RGB666 */
+#define VP_CTRL_VTGEN(v)	FLD_VAL(v, 4, 4) /* Use chip clock for timing */
+#define VP_CTRL_EVTMODE(v)	FLD_VAL(v, 5, 5) /* Event mode */
+#define VP_CTRL_RGB888(v)	FLD_VAL(v, 8, 8) /* RGB888 mode */
+#define VP_CTRL_VSDELAY(v)	FLD_VAL(v, 31, 20) /* VSYNC delay */
+#define VP_HTIM1		0x0454 /* Horizontal Timing Control 1 */
+#define VP_HTIM1_HBP(v)		FLD_VAL(v, 24, 16)
+#define VP_HTIM1_HSYNC(v)	FLD_VAL(v, 8, 0)
+#define VP_HTIM2		0x0458 /* Horizontal Timing Control 2 */
+#define VP_HTIM2_HFP(v)		FLD_VAL(v, 24, 16)
+#define VP_HTIM2_HACT(v)	FLD_VAL(v, 10, 0)
+#define VP_VTIM1		0x045C /* Vertical Timing Control 1 */
+#define VP_VTIM1_VBP(v)		FLD_VAL(v, 23, 16)
+#define VP_VTIM1_VSYNC(v)	FLD_VAL(v, 7, 0)
+#define VP_VTIM2		0x0460 /* Vertical Timing Control 2 */
+#define VP_VTIM2_VFP(v)		FLD_VAL(v, 23, 16)
+#define VP_VTIM2_VACT(v)	FLD_VAL(v, 10, 0)
+#define VP_VFUEN		0x0464 /* Video Frame Timing Update Enable */
+
+/* LVDS registers */
+#define LV_MX0003		0x0480 /* Mux input bit 0 to 3 */
+#define LV_MX0407		0x0484 /* Mux input bit 4 to 7 */
+#define LV_MX0811		0x0488 /* Mux input bit 8 to 11 */
+#define LV_MX1215		0x048C /* Mux input bit 12 to 15 */
+#define LV_MX1619		0x0490 /* Mux input bit 16 to 19 */
+#define LV_MX2023		0x0494 /* Mux input bit 20 to 23 */
+#define LV_MX2427		0x0498 /* Mux input bit 24 to 27 */
+#define LV_MX(b0, b1, b2, b3)	(FLD_VAL(b0, 4, 0) | FLD_VAL(b1, 12, 8) | \
+				FLD_VAL(b2, 20, 16) | FLD_VAL(b3, 28, 24))
+
+/* Input bit numbers used in mux registers */
+enum {
+	LVI_R0,
+	LVI_R1,
+	LVI_R2,
+	LVI_R3,
+	LVI_R4,
+	LVI_R5,
+	LVI_R6,
+	LVI_R7,
+	LVI_G0,
+	LVI_G1,
+	LVI_G2,
+	LVI_G3,
+	LVI_G4,
+	LVI_G5,
+	LVI_G6,
+	LVI_G7,
+	LVI_B0,
+	LVI_B1,
+	LVI_B2,
+	LVI_B3,
+	LVI_B4,
+	LVI_B5,
+	LVI_B6,
+	LVI_B7,
+	LVI_HS,
+	LVI_VS,
+	LVI_DE,
+	LVI_L0
+};
+
+#define LV_CFG			0x049C /* LVDS Configuration */
+#define LV_PHY0			0x04A0 /* LVDS PHY 0 */
+#define LV_PHY0_RST(v)		FLD_VAL(v, 22, 22) /* PHY reset */
+#define LV_PHY0_IS(v)		FLD_VAL(v, 15, 14)
+#define LV_PHY0_ND(v)		FLD_VAL(v, 4, 0)
+
+/* System registers */
+#define SYS_RST			0x0504 /* System Reset */
+#define SYS_ID			0x0580 /* System ID */
+
+static const char * const tc358764_supplies[] = {
+	"vddc", "vddio", "vddmipi", "vddlvds133", "vddlvds112"
+};
+
+struct tc358764 {
+	struct device *dev;
+	struct drm_panel bridge;
+
+	struct regulator_bulk_data supplies[ARRAY_SIZE(tc358764_supplies)];
+	int reset_gpio;
+	struct drm_panel *panel;
+};
+
+int tc358764_read(struct tc358764 *ctx, u16 addr, u32 *val)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	const struct mipi_dsi_host_ops *ops = dsi->host->ops;
+	struct mipi_dsi_msg msg = {
+		.type = MIPI_DSI_GENERIC_READ_REQUEST_2_PARAM,
+		.channel = dsi->channel,
+		.flags = MIPI_DSI_MSG_USE_LPM,
+		.tx_buf = &addr,
+		.tx_len = 2,
+		.rx_buf = val,
+		.rx_len = 4
+	};
+	ssize_t ret;
+
+	if (!ops || !ops->transfer)
+		return -ENOSYS;
+
+	addr = cpu_to_le16(addr);
+
+	ret = ops->transfer(dsi->host, &msg);
+	if (ret >= 0)
+		*val = le32_to_cpu(*val);
+
+	return ret;
+}
+
+int tc358764_write(struct tc358764 *ctx, u16 addr, u32 val)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	const struct mipi_dsi_host_ops *ops = dsi->host->ops;
+	u8 data[6];
+	struct mipi_dsi_msg msg = {
+		.type = MIPI_DSI_GENERIC_LONG_WRITE,
+		.channel = dsi->channel,
+		.flags = MIPI_DSI_MSG_USE_LPM | MIPI_DSI_MSG_REQ_ACK,
+		.tx_buf = data,
+		.tx_len = 6
+	};
+
+	if (!ops || !ops->transfer)
+		return -ENOSYS;
+
+	data[0] = addr;
+	data[1] = addr >> 8;
+	data[2] = val;
+	data[3] = val >> 8;
+	data[4] = val >> 16;
+	data[5] = val >> 24;
+
+	return ops->transfer(dsi->host, &msg);
+}
+
+#define bridge_to_tc358764(p) container_of(p, struct tc358764, bridge)
+
+static int tc358764_init(struct tc358764 *ctx)
+{
+	u32 v = 0;
+
+	tc358764_read(ctx, SYS_ID, &v);
+	dev_info(ctx->dev, "ID: %#x\n", v);
+
+	/* configure PPI counters */
+	tc358764_write(ctx, PPI_TX_RX_TA, 0x20003);
+	tc358764_write(ctx, PPI_LPTXTIMECNT, 2);
+	tc358764_write(ctx, PPI_D0S_CLRSIPOCOUNT, 5);
+	tc358764_write(ctx, PPI_D1S_CLRSIPOCOUNT, 5);
+	tc358764_write(ctx, PPI_D2S_CLRSIPOCOUNT, 5);
+	tc358764_write(ctx, PPI_D3S_CLRSIPOCOUNT, 5);
+
+	/* enable four data lanes and clock lane */
+	tc358764_write(ctx, PPI_LANEENABLE, 0x1f);
+	tc358764_write(ctx, DSI_LANEENABLE, 0x1f);
+
+	/* start */
+	tc358764_write(ctx, PPI_STARTPPI, 1);
+	tc358764_write(ctx, DSI_STARTDSI, 1);
+
+	/* configure video path */
+	tc358764_write(ctx, VP_CTRL, VP_CTRL_VSDELAY(15) | VP_CTRL_RGB888(1) |
+		       VP_CTRL_EVTMODE(1) | BIT(17) | BIT(19));
+
+	/* reset PHY */
+	tc358764_write(ctx, LV_PHY0, LV_PHY0_RST(1)
+		       | BIT(18) | LV_PHY0_IS(2) | LV_PHY0_ND(6));
+	tc358764_write(ctx, LV_PHY0, BIT(18) | LV_PHY0_IS(2) | LV_PHY0_ND(6));
+
+	/* reset bridge */
+	tc358764_write(ctx, SYS_RST, BIT(2));
+
+	/* set bit order */
+	tc358764_write(ctx, LV_MX0003, LV_MX(LVI_R0, LVI_R1, LVI_R2, LVI_R3));
+	tc358764_write(ctx, LV_MX0407, LV_MX(LVI_R4, LVI_R7, LVI_R5, LVI_G0));
+	tc358764_write(ctx, LV_MX0811, LV_MX(LVI_G1, LVI_G2, LVI_G6, LVI_G7));
+	tc358764_write(ctx, LV_MX1215, LV_MX(LVI_G3, LVI_G4, LVI_G5, LVI_B0));
+	tc358764_write(ctx, LV_MX1619, LV_MX(LVI_B6, LVI_B7, LVI_B1, LVI_B2));
+	tc358764_write(ctx, LV_MX2023, LV_MX(LVI_B3, LVI_B4, LVI_B5, LVI_L0));
+	tc358764_write(ctx, LV_MX2427, LV_MX(LVI_HS, LVI_VS, LVI_DE, LVI_R6));
+	tc358764_write(ctx, LV_CFG, 0xd);
+
+	return 0;
+}
+
+static void tc358764_reset(struct tc358764 *ctx)
+{
+	msleep(20);
+	gpio_set_value(ctx->reset_gpio, 0);
+	msleep(20);
+	gpio_set_value(ctx->reset_gpio, 1);
+	msleep(40);
+}
+
+static void tc358764_poweron(struct tc358764 *ctx)
+{
+	int ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies),
+					ctx->supplies);
+	if (ret < 0)
+		dev_err(ctx->dev, "error enabling regulators (%d)\n", ret);
+
+	tc358764_reset(ctx);
+
+	drm_panel_enable(ctx->panel);
+	msleep(40);
+}
+
+static void tc358764_poweroff(struct tc358764 *ctx)
+{
+	int ret;
+
+	tc358764_reset(ctx);
+
+	drm_panel_disable(ctx->panel);
+	msleep(40);
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret < 0)
+		dev_err(ctx->dev, "error enabling regulators (%d)\n", ret);
+}
+
+int tc358764_disable(struct drm_panel *bridge)
+{
+	struct tc358764 *ctx = bridge_to_tc358764(bridge);
+
+	tc358764_poweroff(ctx);
+
+	return 0;
+}
+
+int tc358764_enable(struct drm_panel *bridge)
+{
+	struct tc358764 *ctx = bridge_to_tc358764(bridge);
+
+	tc358764_poweron(ctx);
+
+	return tc358764_init(ctx);
+}
+
+int tc358764_get_modes(struct drm_panel *bridge)
+{
+	struct tc358764 *ctx = bridge_to_tc358764(bridge);
+
+	if (!ctx->panel->drm)
+		drm_panel_attach(ctx->panel, ctx->bridge.connector);
+
+	return ctx->panel->funcs->get_modes(ctx->panel);
+}
+
+static const struct drm_panel_funcs tc358764_drm_funcs = {
+	.disable = tc358764_disable,
+	.enable = tc358764_enable,
+	.get_modes = tc358764_get_modes,
+};
+
+/* of_* functions will be removed after acceptance of of_graph patches */
+static struct device_node *
+of_get_child_by_name_reg(struct device_node *parent, const char *name, u32 reg)
+{
+	struct device_node *np;
+
+	for_each_child_of_node(parent, np) {
+		u32 r;
+
+		if (!np->name || of_node_cmp(np->name, name))
+			continue;
+
+		if (of_property_read_u32(np, "reg", &r) < 0)
+			r = 0;
+
+		if (reg == r)
+			break;
+	}
+
+	return np;
+}
+
+static struct device_node *of_graph_get_port_by_reg(struct device_node *parent,
+						    u32 reg)
+{
+	struct device_node *ports, *port;
+
+	ports = of_get_child_by_name(parent, "ports");
+	if (ports) {
+		port = of_get_child_by_name_reg(ports, "port", reg);
+		of_node_put(ports);
+	} else {
+		port = of_get_child_by_name_reg(parent, "port", reg);
+	}
+	return port;
+}
+
+static struct device_node *
+of_graph_get_endpoint_by_reg(struct device_node *port, u32 reg)
+{
+	return of_get_child_by_name_reg(port, "endpoint", reg);
+}
+
+static struct device_node *
+of_graph_get_remote_port_parent(const struct device_node *node)
+{
+	struct device_node *np;
+	unsigned int depth;
+
+	/* Get remote endpoint node. */
+	np = of_parse_phandle(node, "remote-endpoint", 0);
+
+	/* Walk 3 levels up only if there is 'ports' node. */
+	for (depth = 3; depth && np; depth--) {
+		np = of_get_next_parent(np);
+		if (depth == 2 && of_node_cmp(np->name, "ports"))
+			break;
+	}
+	return np;
+}
+
+static struct device_node *tc358764_of_find_panel_node(struct device *dev)
+{
+	struct device_node *np, *ep;
+
+	np = of_graph_get_port_by_reg(dev->of_node, 1);
+	if (!np)
+		return NULL;
+
+	ep = of_graph_get_endpoint_by_reg(np, 0);
+	of_node_put(np);
+	if (!ep)
+		return NULL;
+
+	np = of_graph_get_remote_port_parent(ep);
+	of_node_put(ep);
+
+	return np;
+}
+
+static int tc358764_parse_dt(struct tc358764 *ctx)
+{
+	struct device *dev = ctx->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *lvds;
+
+	ctx->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
+	if (ctx->reset_gpio < 0) {
+		dev_err(dev, "no reset GPIO pin provided\n");
+		//return ctx->reset_gpio;
+	}
+
+	lvds = tc358764_of_find_panel_node(ctx->dev);
+	if (!lvds) {
+		dev_err(dev, "cannot find panel node\n");
+		return -EINVAL;
+	}
+	ctx->panel = of_drm_find_panel(lvds);
+	if (!ctx->panel) {
+		dev_info(dev, "panel not registered\n");
+		return -EPROBE_DEFER;
+	}
+
+	return 0;
+}
+
+static int tc358764_configure_regulators(struct tc358764 *ctx)
+{
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(ctx->supplies); ++i)
+		ctx->supplies[i].supply = tc358764_supplies[i];
+
+	ret = devm_regulator_bulk_get(ctx->dev, ARRAY_SIZE(ctx->supplies),
+				      ctx->supplies);
+	if (ret < 0)
+		dev_info(ctx->dev, "failed to get regulators: %d\n", ret);
+
+	return ret;
+}
+
+static int tc358764_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct tc358764 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(struct tc358764), GFP_KERNEL);
+	if (!ctx) {
+		dev_err(dev, "failed to allocate tc358764 structure.\n");
+		return -ENOMEM;
+	}
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->dev = dev;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST
+		| MIPI_DSI_MODE_VIDEO_AUTO_VERT;
+
+	ret = tc358764_parse_dt(ctx);
+	if (ret < 0)
+		return ret;
+
+	ret = tc358764_configure_regulators(ctx);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_gpio_request_one(dev, ctx->reset_gpio, GPIOF_DIR_OUT,
+				    "TC358764_RESET");
+	if (ret < 0) {
+		dev_info(dev, "failed to request reset gpio\n");
+		return ret;
+	}
+
+	drm_panel_init(&ctx->bridge);
+	ctx->bridge.dev = dev;
+	ctx->bridge.funcs = &tc358764_drm_funcs;
+
+	ret = drm_panel_add(&ctx->bridge);
+	if (ret < 0)
+		return ret;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0)
+		drm_panel_remove(&ctx->bridge);
+
+	return ret;
+}
+
+static int tc358764_remove(struct mipi_dsi_device *dsi)
+{
+	struct tc358764 *ctx = mipi_dsi_get_drvdata(dsi);
+
+	tc358764_poweroff(ctx);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->bridge);
+
+	return 0;
+}
+
+static struct of_device_id tc358764_of_match[] = {
+	{ .compatible = "toshiba,tc358764" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, tc358764_of_match);
+
+static struct mipi_dsi_driver tc358764_driver = {
+	.probe = tc358764_probe,
+	.remove = tc358764_remove,
+	.driver = {
+		.name = "panel_tc358764",
+		.owner = THIS_MODULE,
+		.of_match_table = tc358764_of_match,
+	},
+};
+module_mipi_dsi_driver(tc358764_driver);
+
+MODULE_AUTHOR("Andrzej Hajda <a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>");
+MODULE_DESCRIPTION("MIPI-DSI based Driver for TC358764 DSI/LVDS Bridge");
+MODULE_LICENSE("GPL v2");
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-02-12 11:31 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-12 11:31 [RFC PATCH v2 00/21] Add DSI display support for Exynos based boards Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 01/21] drm_mipi_dsi: add flags to DSI messages Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 02/21] drm/exynos: delay fbdev initialization until an output is connected Andrzej Hajda
2014-02-12 12:03   ` Sachin Kamat
2014-02-12 11:31 ` [RFC PATCH v2 03/21] exynos/dsim: add DT bindings Andrzej Hajda
2014-03-05  5:56   ` Inki Dae
2014-03-07 10:54     ` Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 04/21] drm/exynos: add DSIM driver Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 05/21] panel/s6e8aa0: add DT bindings Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 06/21] drm/panel: add S6E8AA0 driver Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 07/21] panel/tc358764: add DT bindings Andrzej Hajda
     [not found] ` <1392204688-4591-1-git-send-email-a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2014-02-12 11:31   ` Andrzej Hajda [this message]
2014-03-05  6:46     ` [RFC PATCH v2 08/21] drm/panel: add TC358764 driver Inki Dae
2014-03-07 10:44       ` Andrzej Hajda
2014-02-12 11:31   ` [RFC PATCH v2 09/21] panel/simple: add video interface DT bindings Andrzej Hajda
2014-02-12 11:31   ` [RFC PATCH v2 12/21] ARM: dts: exynos4: add MIPI DSI Master node Andrzej Hajda
2014-02-12 11:31   ` [RFC PATCH v2 20/21] ARM: dts: exynos4210-trats: enable exynos/fimd node Andrzej Hajda
2014-02-12 11:31   ` [RFC PATCH v2 21/21] ARM: dts: exynos4412-trats2: " Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 10/21] panel/hv070wsa-100: add DT bindings Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 11/21] drm/panel: add support for BOE HV070WSA-100 panel to simple-panel Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 13/21] ARM: dts: exynos4210-trats: add panel node Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 14/21] ARM: dts: exynos4412-trats2: " Andrzej Hajda
2014-02-28 13:33   ` Tomi Valkeinen
2014-03-04 12:07     ` Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 15/21] ARM: dts: exynos5250: add mipi-phy node Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 16/21] ARM: dts: exynos5250: add display power domain node Andrzej Hajda
2014-02-12 11:51   ` Sachin Kamat
2014-02-12 11:59     ` Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 17/21] ARM: dts: exynos5250: add DSI node Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 18/21] ARM: dts: exynos5250-arndale: add display regulators Andrzej Hajda
2014-02-12 11:31 ` [RFC PATCH v2 19/21] ARM: dts: exynos5250-arndale: add dsi and panel nodes Andrzej Hajda
2014-02-28 13:31   ` Tomi Valkeinen
2014-02-28 13:39     ` Tomi Valkeinen
2014-03-04 12:00       ` Andrzej Hajda
2014-03-04 12:40         ` Tomi Valkeinen
2014-03-05 12:06         ` Inki Dae
2014-03-07 12:22           ` Andrzej Hajda
2014-03-07 12:32             ` Tomi Valkeinen
2014-03-07 13:07               ` Andrzej Hajda
2014-03-07 13:28                 ` Tomi Valkeinen
2014-03-07 14:17                   ` Andrzej Hajda
2014-03-07 14:36                     ` Tomi Valkeinen
2014-03-05  2:56 ` [RFC PATCH v2 00/21] Add DSI display support for Exynos based boards Inki Dae
2014-03-07 10:00   ` Andrzej Hajda
2014-03-12 10:08     ` Inki Dae
2014-03-12 11:16       ` Tomasz Figa
2014-03-13  7:08         ` Inki Dae
2014-03-13 13:41           ` Andrzej Hajda
2014-03-13 15:35             ` Inki Dae

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1392204688-4591-9-git-send-email-a.hajda@samsung.com \
    --to=a.hajda-sze3o3uu22jbdgjk7y7tuq@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox