From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tomasz Figa Subject: [PATCH 2/4] ARM: EXYNOS: Fix core ID used by platsmp and hotplug code Date: Fri, 18 Apr 2014 16:42:59 +0200 Message-ID: <1397832181-5153-3-git-send-email-t.figa@samsung.com> References: <1397832181-5153-1-git-send-email-t.figa@samsung.com> Return-path: Received: from mailout1.w1.samsung.com ([210.118.77.11]:29203 "EHLO mailout1.w1.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753298AbaDROnP (ORCPT ); Fri, 18 Apr 2014 10:43:15 -0400 In-reply-to: <1397832181-5153-1-git-send-email-t.figa@samsung.com> Sender: linux-samsung-soc-owner@vger.kernel.org List-Id: linux-samsung-soc@vger.kernel.org To: linux-samsung-soc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, Rob Herring , Mark Rutland , Kukjin Kim , Thomas Gleixner , Marc Zyngier , Arnd Bergmann , Marek Szyprowski , Tomasz Figa , Tomasz Figa When CPU topology is specified in device tree, cpu_logical_map() does not return core ID anymore, but rather full MPIDR value. This breaks existing calculation of PMU register offsets on Exynos SoCs. This patch fixes the problem by adjusting the code to use only core ID bits of the value returned by cpu_logical_map() to allow CPU topology to be specified in device tree on Exynos SoCs. Signed-off-by: Tomasz Figa --- arch/arm/mach-exynos/hotplug.c | 10 ++++++---- arch/arm/mach-exynos/platsmp.c | 31 ++++++++++++++++++------------- 2 files changed, 24 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 7e0f31a..8a5f07d 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -92,11 +92,13 @@ static inline void cpu_leave_lowpower(void) static inline void platform_do_lowpower(unsigned int cpu, int *spurious) { + u32 mpidr = cpu_logical_map(cpu); + u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); + for (;;) { - /* make cpu1 to be turned off at next WFI command */ - if (cpu == 1) - __raw_writel(0, S5P_ARM_CORE_CONFIGURATION(1)); + /* Turn the CPU off on next WFI instruction. */ + __raw_writel(0, S5P_ARM_CORE_CONFIGURATION(core_id)); /* * here's the WFI @@ -106,7 +108,7 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) : : "memory", "cc"); - if (pen_release == cpu_logical_map(cpu)) { + if (pen_release == core_id) { /* * OK, proper wakeup, we're done */ diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 7b7de4b..e08b2c5 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -89,7 +89,9 @@ static void exynos_secondary_init(unsigned int cpu) static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; - unsigned long phys_cpu = cpu_logical_map(cpu); + u32 mpidr = cpu_logical_map(cpu); + u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); + u32 reg; /* * Set synchronisation state between this boot processor @@ -102,19 +104,20 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * the holding pen - release it, then wait for it to flag * that it has been released by resetting pen_release. * - * Note that "pen_release" is the hardware CPU ID, whereas + * Note that "pen_release" is the hardware CPU core ID, whereas * "cpu" is Linux's internal ID. */ - write_pen_release(phys_cpu); + write_pen_release(core_id); - if (!(__raw_readl(S5P_ARM_CORE_STATUS(1)) & S5P_CORE_LOCAL_PWR_EN)) { + reg = __raw_readl(S5P_ARM_CORE_STATUS(core_id)); + if (!(reg & S5P_CORE_LOCAL_PWR_EN)) { __raw_writel(S5P_CORE_LOCAL_PWR_EN, - S5P_ARM_CORE_CONFIGURATION(1)); + S5P_ARM_CORE_CONFIGURATION(core_id)); timeout = 10; /* wait max 10 ms until cpu1 is on */ - while ((__raw_readl(S5P_ARM_CORE_STATUS(1)) + while ((__raw_readl(S5P_ARM_CORE_STATUS(core_id)) & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) { if (timeout-- == 0) break; @@ -146,10 +149,10 @@ static int exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) * Try to set boot address using firmware first * and fall back to boot register if it fails. */ - if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) - __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + if (call_firmware_op(set_cpu_boot_addr, core_id, boot_addr)) + __raw_writel(boot_addr, cpu_boot_reg(core_id)); - call_firmware_op(cpu_boot, phys_cpu); + call_firmware_op(cpu_boot, core_id); arch_send_wakeup_ipi_mask(cpumask_of(cpu)); @@ -215,14 +218,16 @@ static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) * boot register if it fails. */ for (i = 1; i < max_cpus; ++i) { - unsigned long phys_cpu; unsigned long boot_addr; + u32 mpidr; + u32 core_id; - phys_cpu = cpu_logical_map(i); + mpidr = cpu_logical_map(i); + core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0); boot_addr = virt_to_phys(exynos4_secondary_startup); - if (call_firmware_op(set_cpu_boot_addr, phys_cpu, boot_addr)) - __raw_writel(boot_addr, cpu_boot_reg(phys_cpu)); + if (call_firmware_op(set_cpu_boot_addr, core_id, boot_addr)) + __raw_writel(boot_addr, cpu_boot_reg(core_id)); } } -- 1.9.2