linux-samsung-soc.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Thomas Abraham <thomas.ab@samsung.com>
To: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: rjw@rjwysocki.net, linux-samsung-soc@vger.kernel.org,
	kgene.kim@samsung.com, t.figa@samsung.com,
	l.majewski@samsung.com, viresh.kumar@linaro.org,
	thomas.ab@samsung.com, Nishanth Menon <nm@ti.com>
Subject: [PATCH v5 1/2] cpufreq / OPP: Allow boost frequency to be looked up from device tree
Date: Thu, 29 May 2014 20:08:38 +0530	[thread overview]
Message-ID: <1401374319-4480-2-git-send-email-thomas.ab@samsung.com> (raw)
In-Reply-To: <1401374319-4480-1-git-send-email-thomas.ab@samsung.com>

From: Thomas Abraham <thomas.ab@samsung.com>

Commit 6f19efc0 ("cpufreq: Add boost frequency support in core") adds
support for CPU boost mode. This patch adds support for finding available
boost frequencies from device tree and marking them as usable in boost mode.

Cc: Nishanth Menon <nm@ti.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
---
 drivers/cpufreq/cpufreq_opp.c |   45 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/drivers/cpufreq/cpufreq_opp.c b/drivers/cpufreq/cpufreq_opp.c
index c0c6f4a..05fb115 100644
--- a/drivers/cpufreq/cpufreq_opp.c
+++ b/drivers/cpufreq/cpufreq_opp.c
@@ -19,6 +19,7 @@
 #include <linux/pm_opp.h>
 #include <linux/rcupdate.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 /**
  * dev_pm_opp_init_cpufreq_table() - create a cpufreq table for a device
@@ -51,6 +52,11 @@ int dev_pm_opp_init_cpufreq_table(struct device *dev,
 	struct cpufreq_frequency_table *freq_table = NULL;
 	int i, max_opps, ret = 0;
 	unsigned long rate;
+#ifdef CONFIG_CPU_FREQ_BOOST_SW
+	struct cpufreq_frequency_table *ft;
+	int len, count;
+	u32 *boost_freqs = NULL;
+#endif
 
 	rcu_read_lock();
 
@@ -82,6 +88,45 @@ int dev_pm_opp_init_cpufreq_table(struct device *dev,
 
 	*table = &freq_table[0];
 
+#ifdef CONFIG_CPU_FREQ_BOOST_SW
+	if (!of_find_property(dev->of_node, "boost-frequencies", &len))
+		goto out;
+
+	if (!len || !IS_ALIGNED(len, sizeof(u32))) {
+		dev_err(dev, "%s: invalid boost frequency\n", __func__);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	boost_freqs = kmalloc(len, GFP_KERNEL);
+	if (!boost_freqs) {
+		dev_err(dev, "%s: no memory for boost freq table\n", __func__);
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	count = len / sizeof(u32);
+	of_property_read_u32_array(dev->of_node, "boost-frequencies",
+			boost_freqs, count);
+
+	for (i = 0; i < count; i++) {
+		cpufreq_for_each_valid_entry(ft, *table) {
+			if (boost_freqs[i] == ft->frequency) {
+				ft->flags |= CPUFREQ_BOOST_FREQ;
+				pr_debug("%s: marked %d as boost frequency\n",
+					__func__, boost_freqs[i]);
+				break;
+			}
+		}
+
+		if (ft->frequency == CPUFREQ_TABLE_END)
+			dev_err(dev, "%s: invalid boost frequency %d\n",
+				__func__, boost_freqs[i]);
+	}
+
+	kfree(boost_freqs);
+#endif
+
 out:
 	rcu_read_unlock();
 	if (ret)
-- 
1.7.9.5

  reply	other threads:[~2014-05-29 14:39 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-29 14:38 [PATCH v5 0/2] cpufreq: opp: Add device tree based lookup of boost mode frequency Thomas Abraham
2014-05-29 14:38 ` Thomas Abraham [this message]
2014-05-29 20:51   ` [PATCH v5 1/2] cpufreq / OPP: Allow boost frequency to be looked up from device tree Nishanth Menon
2014-05-30  7:31   ` Lukasz Majewski
2014-05-29 14:38 ` [PATCH v5 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency Thomas Abraham
2014-05-30  7:31   ` Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1401374319-4480-2-git-send-email-thomas.ab@samsung.com \
    --to=thomas.ab@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kgene.kim@samsung.com \
    --cc=l.majewski@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=rjw@rjwysocki.net \
    --cc=t.figa@samsung.com \
    --cc=viresh.kumar@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).