From: Thierry Reding <thierry.reding@gmail.com>
To: Thierry Reding <thierry.reding@gmail.com>
Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com>,
linux-samsung-soc@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
dri-devel@lists.freedesktop.org, Kukjin Kim <kgene@kernel.org>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] drm/panel: Add Samsung prefix to panel drivers
Date: Fri, 7 Aug 2015 18:27:34 +0200 [thread overview]
Message-ID: <1438964855-16989-3-git-send-email-thierry.reding@gmail.com> (raw)
In-Reply-To: <1438964855-16989-1-git-send-email-thierry.reding@gmail.com>
From: Thierry Reding <treding@nvidia.com>
The likelihood of getting a large number of panel drivers from different
vendors is quite high. Add a prefix to the two existing Samsung panel
drivers to set a guideline for future patch submissions. Using vendor
prefixes consistently should allow a cleaner organization of the tree.
Signed-off-by: Thierry Reding <treding@nvidia.com>
---
arch/arm/configs/exynos_defconfig | 2 +-
arch/arm/configs/multi_v7_defconfig | 2 +-
drivers/gpu/drm/panel/Kconfig | 8 ++++----
drivers/gpu/drm/panel/Makefile | 4 ++--
drivers/gpu/drm/panel/{panel-ld9040.c => panel-samsung-ld9040.c} | 2 +-
.../gpu/drm/panel/{panel-s6e8aa0.c => panel-samsung-s6e8aa0.c} | 2 +-
6 files changed, 10 insertions(+), 10 deletions(-)
rename drivers/gpu/drm/panel/{panel-ld9040.c => panel-samsung-ld9040.c} (99%)
rename drivers/gpu/drm/panel/{panel-s6e8aa0.c => panel-samsung-s6e8aa0.c} (99%)
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 099438e19f05..354124c3ed2c 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -132,7 +132,7 @@ CONFIG_DRM_EXYNOS_FIMD=y
CONFIG_DRM_EXYNOS_DSI=y
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_PANEL_SIMPLE=y
-CONFIG_DRM_PANEL_S6E8AA0=y
+CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=y
CONFIG_FB_SIMPLE=y
CONFIG_EXYNOS_VIDEO=y
CONFIG_EXYNOS_MIPI_DSI=y
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 29be77726ec8..6ba9608798ab 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -446,7 +446,7 @@ CONFIG_DRM_EXYNOS_FIMD=y
CONFIG_DRM_EXYNOS_HDMI=y
CONFIG_DRM_RCAR_DU=m
CONFIG_DRM_TEGRA=y
-CONFIG_DRM_PANEL_S6E8AA0=m
+CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0=m
CONFIG_DRM_PANEL_SIMPLE=y
CONFIG_FB_ARMCLCD=y
CONFIG_FB_WM8505=y
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 6d64c7bb908b..5be25d9282e3 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -18,13 +18,13 @@ config DRM_PANEL_SIMPLE
that it can be automatically turned off when the panel goes into a
low power state.
-config DRM_PANEL_LD9040
- tristate "LD9040 RGB/SPI panel"
+config DRM_PANEL_SAMSUNG_LD9040
+ tristate "Samsung LD9040 RGB/SPI panel"
depends on OF && SPI
select VIDEOMODE_HELPERS
-config DRM_PANEL_S6E8AA0
- tristate "S6E8AA0 DSI video mode panel"
+config DRM_PANEL_SAMSUNG_S6E8AA0
+ tristate "Samsung S6E8AA0 DSI video mode panel"
depends on OF
select DRM_MIPI_DSI
select VIDEOMODE_HELPERS
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 4b2a0430804b..8026ce5d18b5 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -1,4 +1,4 @@
obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
-obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
-obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
diff --git a/drivers/gpu/drm/panel/panel-ld9040.c b/drivers/gpu/drm/panel/panel-samsung-ld9040.c
similarity index 99%
rename from drivers/gpu/drm/panel/panel-ld9040.c
rename to drivers/gpu/drm/panel/panel-samsung-ld9040.c
index bba3501c5821..fcb827003a8c 100644
--- a/drivers/gpu/drm/panel/panel-ld9040.c
+++ b/drivers/gpu/drm/panel/panel-samsung-ld9040.c
@@ -378,7 +378,7 @@ static struct spi_driver ld9040_driver = {
.probe = ld9040_probe,
.remove = ld9040_remove,
.driver = {
- .name = "ld9040",
+ .name = "panel-samsung-ld9040",
.owner = THIS_MODULE,
.of_match_table = ld9040_of_match,
},
diff --git a/drivers/gpu/drm/panel/panel-s6e8aa0.c b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
similarity index 99%
rename from drivers/gpu/drm/panel/panel-s6e8aa0.c
rename to drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
index 9e79bc43b047..6b11e75ff645 100644
--- a/drivers/gpu/drm/panel/panel-s6e8aa0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
@@ -1052,7 +1052,7 @@ static struct mipi_dsi_driver s6e8aa0_driver = {
.probe = s6e8aa0_probe,
.remove = s6e8aa0_remove,
.driver = {
- .name = "panel_s6e8aa0",
+ .name = "panel-samsung-s6e8aa0",
.of_match_table = s6e8aa0_of_match,
},
};
--
2.4.5
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-08-07 16:27 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-07 16:27 [PATCH 1/4] ARM: exynos: Remove PTN3460 dependency Thierry Reding
2015-08-07 16:27 ` [PATCH 2/4] drm/bridge: Add vendor prefixes Thierry Reding
2015-08-08 6:53 ` Krzysztof Kozlowski
2015-08-07 16:27 ` Thierry Reding [this message]
2015-08-08 6:54 ` [PATCH 3/4] drm/panel: Add Samsung prefix to panel drivers Krzysztof Kozlowski
2015-08-07 16:27 ` [PATCH 4/4] drm/bridge: Put Kconfig entries in a separate menu Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1438964855-16989-3-git-send-email-thierry.reding@gmail.com \
--to=thierry.reding@gmail.com \
--cc=arnd@arndb.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=k.kozlowski@samsung.com \
--cc=kgene@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox