Linux Samsung SOC development
 help / color / mirror / Atom feed
From: Gustavo Padovan <gustavo@padovan.org>
To: Inki Dae <inki.dae@samsung.com>
Cc: tjakobi@math.uni-bielefeld.de, linux-samsung-soc@vger.kernel.org,
	Gustavo Padovan <gustavo.padovan@collabora.co.uk>,
	dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 11/11] drm/exynos: remove struct exynos_drm_encoder layer
Date: Tue, 4 Aug 2015 11:47:16 -0300	[thread overview]
Message-ID: <20150804144716.GA8125@joana> (raw)
In-Reply-To: <55C08B98.4090002@samsung.com>

Hi Inki,

2015-08-04 Inki Dae <inki.dae@samsung.com>:

> On 2015년 08월 04일 04:09, Gustavo Padovan wrote:
> > From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> > 
> > struct exynos_drm_encoder was justing wrapping struct drm_encoder, it had
> > only a drm_encoder member and the internal exynos_drm_encoders ops that
> > was directly mapped to the drm_encoder helper funcs.
> > 
> > So now exynos DRM uses struct drm_encoder directly, this removes
> > completely the struct exynos_drm_encoder.
> > 
> > Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
> > ---
> >  drivers/gpu/drm/exynos/Makefile             |   7 +-
> >  drivers/gpu/drm/exynos/exynos7_drm_decon.c  |   2 +-
> >  drivers/gpu/drm/exynos/exynos_dp_core.c     |  68 ++++++++++++------
> >  drivers/gpu/drm/exynos/exynos_dp_core.h     |   2 +-
> >  drivers/gpu/drm/exynos/exynos_drm_core.c    |   1 -
> >  drivers/gpu/drm/exynos/exynos_drm_crtc.c    |   1 -
> >  drivers/gpu/drm/exynos/exynos_drm_dpi.c     |  51 ++++++++------
> >  drivers/gpu/drm/exynos/exynos_drm_drv.c     |   1 -
> >  drivers/gpu/drm/exynos/exynos_drm_drv.h     |  47 ++-----------
> >  drivers/gpu/drm/exynos/exynos_drm_dsi.c     |  80 +++++++++++----------
> >  drivers/gpu/drm/exynos/exynos_drm_encoder.c | 105 ----------------------------
> >  drivers/gpu/drm/exynos/exynos_drm_encoder.h |  22 ------
> >  drivers/gpu/drm/exynos/exynos_drm_fimd.c    |   2 +-
> >  drivers/gpu/drm/exynos/exynos_drm_vidi.c    |  71 ++++++++++++++-----
> >  drivers/gpu/drm/exynos/exynos_hdmi.c        |  85 +++++++++++++---------
> >  15 files changed, 236 insertions(+), 309 deletions(-)
> >  delete mode 100644 drivers/gpu/drm/exynos/exynos_drm_encoder.c
> >  delete mode 100644 drivers/gpu/drm/exynos/exynos_drm_encoder.h
> 
> [-- SNIP --]
> 
> > diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > index d791ad4..a87d030 100644
> > --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
> > @@ -30,7 +30,6 @@
> >  #include <video/videomode.h>
> >  
> >  #include "exynos_drm_crtc.h"
> > -#include "exynos_drm_encoder.h"
> >  #include "exynos_drm_drv.h"
> >  
> >  /* returns true iff both arguments logically differs */
> > @@ -260,7 +259,7 @@ struct exynos_dsi_driver_data {
> >  };
> >  
> >  struct exynos_dsi {
> > -	struct exynos_drm_encoder encoder;
> > +	struct drm_encoder encoder;
> >  	struct mipi_dsi_host dsi_host;
> >  	struct drm_connector connector;
> >  	struct device_node *panel_node;
> > @@ -296,7 +295,7 @@ struct exynos_dsi {
> >  #define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
> >  #define connector_to_dsi(c) container_of(c, struct exynos_dsi, connector)
> >  
> > -static inline struct exynos_dsi *encoder_to_dsi(struct exynos_drm_encoder *e)
> > +static inline struct exynos_dsi *encoder_to_dsi(struct drm_encoder *e)
> >  {
> >  	return container_of(e, struct exynos_dsi, encoder);
> >  }
> > @@ -1273,7 +1272,7 @@ static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
> >  static irqreturn_t exynos_dsi_te_irq_handler(int irq, void *dev_id)
> >  {
> >  	struct exynos_dsi *dsi = (struct exynos_dsi *)dev_id;
> > -	struct drm_encoder *encoder = &dsi->encoder.base;
> > +	struct drm_encoder *encoder = &dsi->encoder;
> >  
> >  	if (dsi->state & DSIM_STATE_VIDOUT_AVAILABLE)
> >  		exynos_drm_crtc_te_handler(encoder->crtc);
> > @@ -1519,7 +1518,7 @@ static void exynos_dsi_poweroff(struct exynos_dsi *dsi)
> >  		dev_err(dsi->dev, "cannot disable regulators %d\n", ret);
> >  }
> >  
> > -static void exynos_dsi_enable(struct exynos_drm_encoder *encoder)
> > +static void exynos_dsi_enable(struct drm_encoder *encoder)
> >  {
> >  	struct exynos_dsi *dsi = encoder_to_dsi(encoder);
> >  	int ret;
> > @@ -1555,7 +1554,7 @@ static void exynos_dsi_enable(struct exynos_drm_encoder *encoder)
> >  	dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE;
> >  }
> >  
> > -static void exynos_dsi_disable(struct exynos_drm_encoder *encoder)
> > +static void exynos_dsi_disable(struct drm_encoder *encoder)
> >  {
> >  	struct exynos_dsi *dsi = encoder_to_dsi(encoder);
> >  
> > @@ -1583,7 +1582,7 @@ exynos_dsi_detect(struct drm_connector *connector, bool force)
> >  		if (dsi->panel)
> >  			drm_panel_attach(dsi->panel, &dsi->connector);
> >  	} else if (!dsi->panel_node) {
> > -		struct exynos_drm_encoder *encoder;
> > +		struct drm_encoder *encoder;
> >  
> >  		encoder = platform_get_drvdata(to_platform_device(dsi->dev));
> >  		exynos_dsi_disable(encoder);
> > @@ -1629,7 +1628,7 @@ exynos_dsi_best_encoder(struct drm_connector *connector)
> >  {
> >  	struct exynos_dsi *dsi = connector_to_dsi(connector);
> >  
> > -	return &dsi->encoder.base;
> > +	return &dsi->encoder;
> >  }
> >  
> >  static struct drm_connector_helper_funcs exynos_dsi_connector_helper_funcs = {
> > @@ -1637,11 +1636,9 @@ static struct drm_connector_helper_funcs exynos_dsi_connector_helper_funcs = {
> >  	.best_encoder = exynos_dsi_best_encoder,
> >  };
> >  
> > -static int exynos_dsi_create_connector(
> > -				struct exynos_drm_encoder *exynos_encoder)
> > +static int exynos_dsi_create_connector(struct drm_encoder *encoder)
> >  {
> > -	struct exynos_dsi *dsi = encoder_to_dsi(exynos_encoder);
> > -	struct drm_encoder *encoder = &exynos_encoder->base;
> > +	struct exynos_dsi *dsi = encoder_to_dsi(encoder);
> >  	struct drm_connector *connector = &dsi->connector;
> >  	int ret;
> >  
> > @@ -1662,28 +1659,34 @@ static int exynos_dsi_create_connector(
> >  	return 0;
> >  }
> >  
> > -static void exynos_dsi_mode_set(struct exynos_drm_encoder *encoder,
> > -			 struct drm_display_mode *mode)
> > +static void exynos_dsi_mode_set(struct drm_encoder *encoder,
> > +				struct drm_display_mode *mode,
> > +				struct drm_display_mode *adjusted_mode)
> >  {
> >  	struct exynos_dsi *dsi = encoder_to_dsi(encoder);
> >  	struct videomode *vm = &dsi->vm;
> > -
> > -	vm->hactive = mode->hdisplay;
> > -	vm->vactive = mode->vdisplay;
> > -	vm->vfront_porch = mode->vsync_start - mode->vdisplay;
> > -	vm->vback_porch = mode->vtotal - mode->vsync_end;
> > -	vm->vsync_len = mode->vsync_end - mode->vsync_start;
> > -	vm->hfront_porch = mode->hsync_start - mode->hdisplay;
> > -	vm->hback_porch = mode->htotal - mode->hsync_end;
> > -	vm->hsync_len = mode->hsync_end - mode->hsync_start;
> > +	struct drm_display_mode *m = adjusted_mode;
> > +
> > +	vm->hactive = m->hdisplay;
> > +	vm->vactive = m->vdisplay;
> > +	vm->vfront_porch = m->vsync_start - m->vdisplay;
> > +	vm->vback_porch = m->vtotal - m->vsync_end;
> > +	vm->vsync_len = m->vsync_end - m->vsync_start;
> > +	vm->hfront_porch = m->hsync_start - m->hdisplay;
> > +	vm->hback_porch = m->htotal - m->hsync_end;
> > +	vm->hsync_len = m->hsync_end - m->hsync_start;
> 
> Above changes are not related to what this patch wants to do and just
> cleanup patch.

It is related in my opinion. Here I change dsi mode_set() to be a
drm_encoder ops. Before the change 'mode' was receiving ajusted_mode, but
now 'mode' receives the original 'mode' and I need to add 

	struct drm_display_mode *m = adjusted_mode;

to use adjusted_mode again.

	Gustavo
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2015-08-04 14:47 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-03 19:09 [PATCH 00/11] drm/exynos: remove exynos_drm_display and exynos_drm_encoder Gustavo Padovan
2015-08-03 19:09 ` [PATCH 01/11] drm/exynos: split display's .dpms() into .enable() and .disable() Gustavo Padovan
2015-08-03 19:09 ` [PATCH 02/11] drm/exynos: remove wrappers for phy_power_{on,off} Gustavo Padovan
2015-08-03 19:09 ` [PATCH 03/11] drm/exynos: remove unused .remove() and .check_mode() ops from display Gustavo Padovan
2015-08-03 19:09 ` [PATCH 04/11] drm/exynos: simplify calculation of possible CRTCs Gustavo Padovan
2015-08-03 19:09 ` [PATCH 05/11] drm/exynos: remove struct exynos_drm_display Gustavo Padovan
2015-08-03 19:09 ` [PATCH 06/11] drm/exynos: remove extra call to hdmi_commit() Gustavo Padovan
2015-08-03 19:09 ` [PATCH 07/11] drm/exynos: remove extra call to exynos_dp_commit() Gustavo Padovan
2015-08-03 19:09 ` [PATCH 08/11] drm/exynos: remove exynos_encoder's .commit() op Gustavo Padovan
2015-08-03 19:09 ` [PATCH 09/11] drm/exynos: remove exynos_drm_create_enc_conn() Gustavo Padovan
2015-08-04  9:41   ` Inki Dae
2015-08-03 19:09 ` [PATCH 10/11] drm/exynos: fold encoder setup into exynos_drm_load() Gustavo Padovan
2015-08-03 19:09 ` [PATCH 11/11] drm/exynos: remove struct exynos_drm_encoder layer Gustavo Padovan
2015-08-04  9:53   ` Inki Dae
2015-08-04 14:47     ` Gustavo Padovan [this message]
2015-08-05  1:31       ` Inki Dae
2015-08-05 13:43         ` Gustavo Padovan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150804144716.GA8125@joana \
    --to=gustavo@padovan.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=gustavo.padovan@collabora.co.uk \
    --cc=inki.dae@samsung.com \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=tjakobi@math.uni-bielefeld.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox