From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chanwoo Choi Subject: [PATCH 3/3] ARM: S5PV210: Add voltage consumer of WM8994 to the regulator framework Date: Fri, 01 Oct 2010 13:23:25 +0900 Message-ID: <4CA5623D.3000002@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7BIT Return-path: Received: from mailout2.samsung.com ([203.254.224.25]:52291 "EHLO mailout2.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750874Ab0JAEX2 (ORCPT ); Fri, 1 Oct 2010 00:23:28 -0400 Received: from epmmp1 (mailout2.samsung.com [203.254.224.25]) by mailout2.samsung.com (Sun Java(tm) System Messaging Server 7u3-15.01 64bit (built Feb 12 2010)) with ESMTP id <0L9L00E58G72SI30@mailout2.samsung.com> for linux-samsung-soc@vger.kernel.org; Fri, 01 Oct 2010 13:23:26 +0900 (KST) Received: from TNRNDGASPAPP1.tn.corp.samsungelectronics.net ([165.213.149.150]) by mmp1.samsung.com (iPlanet Messaging Server 5.2 Patch 2 (built Jul 14 2004)) with ESMTPA id <0L9L00IU1G72XX@mmp1.samsung.com> for linux-samsung-soc@vger.kernel.org; Fri, 01 Oct 2010 13:23:26 +0900 (KST) Sender: linux-samsung-soc-owner@vger.kernel.org List-Id: linux-samsung-soc@vger.kernel.org To: linux-arm-kernel Cc: linux-samsung-soc , Kyungmin Park , Myungjoo Ham , Joonyoung Shim , Ben Dooks , Kukjin Kim , Mark Brown , Liam Girdwood This patch add cose related to regulator. To control powre consumeption have registered the voltage consumer of WM8994 to the regulator framework. Additionally, I explain the constraints of the regulator of WM8994 codec. All these consumer supply of WM8994 codec connected the regulator(VCC_1.8V) on a circuit diagram. "VCC_1.8V" regulator is always enabled, because it is used to many devices on Goni/Aquila board. This is required especially when there are many devices physically attached to "VCC_1.8V" and some of they did not "register" as consumers to "VCC_1.8V". "VCC_1.8V" might be turned off by those who are registered while "unregistered" are still active Signed-off-by : Chanwoo Choi Signed-off-by : Joonyoung Shim Signed-off-by : Kyungmin Park --- arch/arm/mach-s5pv210/mach-aquila.c | 119 +++++++++++++++++++++++++++++++++++ arch/arm/mach-s5pv210/mach-goni.c | 119 +++++++++++++++++++++++++++++++++++ 2 files changed, 238 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 92dad41..825d70c 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include #include #include @@ -379,6 +381,120 @@ static struct max8998_platform_data aquila_max8998_pdata = { }; #endif +static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { + { + .dev_name = "5-001a", + .supply = "DBVDD", + }, { + .dev_name = "5-001a", + .supply = "AVDD2", + }, { + .dev_name = "5-001a", + .supply = "CPVDD", + }, + +}; + +static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { + { + .dev_name = "5-001a", + .supply = "SPKVDD1", + }, { + .dev_name = "5-001a", + .supply = "SPKVDD2", + }, +}; + +static struct regulator_init_data wm8994_fixed_voltage0_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), + .consumer_supplies = wm8994_fixed_voltage0_supplies, +}; + +static struct regulator_init_data wm8994_fixed_voltage1_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), + .consumer_supplies = wm8994_fixed_voltage1_supplies, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage0_config = { + .supply_name = "VCC_1.8V_PDA", + .microvolts = 1800000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage0_init_data, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage1_config = { + .supply_name = "V_BAT", + .microvolts = 3700000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage1_init_data, +}; + +static struct platform_device wm8994_fixed_voltage0 = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &wm8994_fixed_voltage0_config, + }, +}; + +static struct platform_device wm8994_fixed_voltage1 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &wm8994_fixed_voltage1_config, + }, +}; + +static struct regulator_consumer_supply wm8994_avdd1_supply = { + .dev_name = "5-001a", + .supply = "AVDD1", +}; + +static struct regulator_consumer_supply wm8994_dcvdd_supply = { + .dev_name = "5-001a", + .supply = "DCVDD", +}; + +static struct regulator_init_data wm8994_ldo1_data = { + .constraints = { + .name = "AVDD1_3.0V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_avdd1_supply, +}; + +static struct regulator_init_data wm8994_ldo2_data = { + .constraints = { + .name = "DCVDD_1.0V", + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_dcvdd_supply, +}; + +static struct wm8994_pdata wm8994_platform_data = { + /* configure gpio1 function: 0x0001(Logic level input/output) */ + .gpio_defaults[0] = 0x0001, + /* configure gpio3/4/5/7 function for AIF2 voice */ + .gpio_defaults[2] = 0x8100, + .gpio_defaults[3] = 0x8100, + .gpio_defaults[4] = 0x8100, + .gpio_defaults[6] = 0x0100, + /* configure gpio8/9/10/11 function for AIF3 BT */ + .gpio_defaults[7] = 0x8100, + .gpio_defaults[8] = 0x0100, + .gpio_defaults[9] = 0x0100, + .gpio_defaults[10] = 0x0100, + .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, +}; + /* GPIO I2C PMIC */ #define AP_I2C_GPIO_PMIC_BUS_4 4 static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = { @@ -423,6 +539,7 @@ static struct i2c_board_info i2c_gpio5_devs[] __initdata = { { /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ I2C_BOARD_INFO("wm8994", 0x1a), + .platform_data = &wm8994_platform_data, }, }; @@ -508,6 +625,8 @@ static struct platform_device *aquila_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5pv210_device_iis0, + &wm8994_fixed_voltage0, + &wm8994_fixed_voltage1, }; static void __init aquila_sound_init(void) diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index d3bab85..667d453 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include #include #include @@ -360,6 +362,120 @@ static struct max8998_platform_data goni_max8998_pdata = { }; #endif +static struct regulator_consumer_supply wm8994_fixed_voltage0_supplies[] = { + { + .dev_name = "5-001a", + .supply = "DBVDD", + }, { + .dev_name = "5-001a", + .supply = "AVDD2", + }, { + .dev_name = "5-001a", + .supply = "CPVDD", + }, + +}; + +static struct regulator_consumer_supply wm8994_fixed_voltage1_supplies[] = { + { + .dev_name = "5-001a", + .supply = "SPKVDD1", + }, { + .dev_name = "5-001a", + .supply = "SPKVDD2", + }, +}; + +static struct regulator_init_data wm8994_fixed_voltage0_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage0_supplies), + .consumer_supplies = wm8994_fixed_voltage0_supplies, +}; + +static struct regulator_init_data wm8994_fixed_voltage1_init_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wm8994_fixed_voltage1_supplies), + .consumer_supplies = wm8994_fixed_voltage1_supplies, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage0_config = { + .supply_name = "VCC_1.8V_PDA", + .microvolts = 1800000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage0_init_data, +}; + +static struct fixed_voltage_config wm8994_fixed_voltage1_config = { + .supply_name = "V_BAT", + .microvolts = 3700000, + .gpio = -EINVAL, + .init_data = &wm8994_fixed_voltage1_init_data, +}; + +static struct platform_device wm8994_fixed_voltage0 = { + .name = "reg-fixed-voltage", + .id = 0, + .dev = { + .platform_data = &wm8994_fixed_voltage0_config, + }, +}; + +static struct platform_device wm8994_fixed_voltage1 = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &wm8994_fixed_voltage1_config, + }, +}; + +static struct regulator_consumer_supply wm8994_avdd1_supply = { + .dev_name = "5-001a", + .supply = "AVDD1", +}; + +static struct regulator_consumer_supply wm8994_dcvdd_supply = { + .dev_name = "5-001a", + .supply = "DCVDD", +}; + +static struct regulator_init_data wm8994_ldo1_data = { + .constraints = { + .name = "AVDD1_3.0V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_avdd1_supply, +}; + +static struct regulator_init_data wm8994_ldo2_data = { + .constraints = { + .name = "DCVDD_1.0V", + }, + .num_consumer_supplies = 1, + .consumer_supplies = &wm8994_dcvdd_supply, +}; + +static struct wm8994_pdata wm8994_platform_data = { + /* configure gpio1 function: 0x0001(Logic level input/output) */ + .gpio_defaults[0] = 0x0001, + /* configure gpio3/4/5/7 function for AIF2 voice */ + .gpio_defaults[2] = 0x8100, + .gpio_defaults[3] = 0x8100, + .gpio_defaults[4] = 0x8100, + .gpio_defaults[6] = 0x0100, + /* configure gpio8/9/10/11 function for AIF3 BT */ + .gpio_defaults[7] = 0x8100, + .gpio_defaults[8] = 0x0100, + .gpio_defaults[9] = 0x0100, + .gpio_defaults[10] = 0x0100, + .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, +}; + /* GPIO I2C PMIC */ #define AP_I2C_GPIO_PMIC_BUS_4 4 static struct i2c_gpio_platform_data goni_i2c_gpio_pmic_data = { @@ -404,6 +520,7 @@ static struct i2c_board_info i2c_gpio5_devs[] __initdata = { { /* CS/ADDR = low 0x34 (FYI: high = 0x36) */ I2C_BOARD_INFO("wm8994", 0x1a), + .platform_data = &wm8994_platform_data, }, }; @@ -489,6 +606,8 @@ static struct platform_device *goni_devices[] __initdata = { &s3c_device_hsmmc1, &s3c_device_hsmmc2, &s5pv210_device_iis0, + &wm8994_fixed_voltage0, + &wm8994_fixed_voltage1, }; static void __init goni_sound_init(void) -- 1.7.0.4