From: Kukjin Kim <kgene.kim@samsung.com>
To: Thomas Abraham <thomas.abraham@linaro.org>
Cc: devicetree-discuss@lists.ozlabs.org,
linux-samsung-soc@vger.kernel.org, grant.likely@secretlab.ca,
rob.herring@calxeda.com, arnd@arndb.de, kgene.kim@samsung.com,
linux-arm-kernel@lists.infradead.org, patches@linaro.org
Subject: Re: [PATCH 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards
Date: Mon, 24 Oct 2011 15:02:44 +0200 [thread overview]
Message-ID: <4EA561F4.5010606@samsung.com> (raw)
In-Reply-To: <1318342396-26178-1-git-send-email-thomas.abraham@linaro.org>
On 10/11/11 16:13, Thomas Abraham wrote:
> This patchset adds a new basic device tree enabled machine/board file which is
> based on the Samsung's Exynos4 family of SoC's. Also included in this patchset is the
> dts file for Exynos4210 SoC, Samsung's SMDKV310 board and Insignal's Origen board.
>
> The Exynos4210 dts file includes support for IRQ, GPIO, WDT, RTC, UART, SDHCI, Keypad,
> DMA and I2C controllers. As device tree coverage for Exynos4210 increases, additional
> device nodes to represent the controllers should be added.
>
> The device tree enabled machine file enables boot on two boards based on the
> Exynos4210 SoC. This provides a starting point to add additional device tree support
> on these boards, migrate other existing Exynos4 based boards to use device tree
> and enable device tree based boot on new upcoming boards.
>
> This patchset has been tested on the following tree:
> https://github.com/kgene/linux-samsung.git branch: for-next
>
> Thomas Abraham (2):
> ARM: Samsung: Add Exynos4 device tree enabled board file
> ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board
>
> .../devicetree/bindings/arm/insignal-boards.txt | 8 +
> .../devicetree/bindings/arm/samsung-boards.txt | 8 +
> arch/arm/boot/dts/exynos4210-origen.dts | 137 +++++++
> arch/arm/boot/dts/exynos4210-smdkv310.dts | 182 +++++++++
> arch/arm/boot/dts/exynos4210.dtsi | 403 ++++++++++++++++++++
> arch/arm/mach-exynos4/Kconfig | 14 +
> arch/arm/mach-exynos4/Makefile | 2 +
> arch/arm/mach-exynos4/mach-exynos4-dt.c | 85 ++++
> 8 files changed, 839 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/arm/insignal-boards.txt
> create mode 100644 Documentation/devicetree/bindings/arm/samsung-boards.txt
> create mode 100644 arch/arm/boot/dts/exynos4210-origen.dts
> create mode 100644 arch/arm/boot/dts/exynos4210-smdkv310.dts
> create mode 100644 arch/arm/boot/dts/exynos4210.dtsi
> create mode 100644 arch/arm/mach-exynos4/mach-exynos4-dt.c
Applied.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
prev parent reply other threads:[~2011-10-24 13:02 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-11 14:13 [PATCH 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards Thomas Abraham
2011-10-11 14:13 ` [PATCH 1/2] ARM: Samsung: Add Exynos4 device tree enabled board file Thomas Abraham
2011-10-13 17:51 ` Grant Likely
2011-10-14 11:28 ` Kukjin Kim
[not found] ` <000201cc8a64$6775ae30$36610a90$%kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2011-10-14 12:22 ` Rob Herring
2011-10-11 14:13 ` [PATCH 2/2] ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen board Thomas Abraham
2011-10-13 17:52 ` Grant Likely
2011-10-14 11:29 ` Kukjin Kim
2011-10-24 13:02 ` Kukjin Kim [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EA561F4.5010606@samsung.com \
--to=kgene.kim@samsung.com \
--cc=arnd@arndb.de \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=patches@linaro.org \
--cc=rob.herring@calxeda.com \
--cc=thomas.abraham@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox