From: Hans Verkuil <hverkuil@xs4all.nl>
To: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: linux-media@vger.kernel.org, kyungmin.park@samsung.com,
pawel@osciak.com, javier.martin@vista-silicon.com,
m.szyprowski@samsung.com, shaik.ameer@samsung.com,
arun.kk@samsung.com, k.debski@samsung.com,
linux-samsung-soc@vger.kernel.org
Subject: Re: [PATCH RFC 3/7] exynos4-is: Use mem-to-mem ioctl helpers
Date: Mon, 30 Sep 2013 11:44:34 +0200 [thread overview]
Message-ID: <52494802.6020805@xs4all.nl> (raw)
In-Reply-To: <1379076986-10446-4-git-send-email-s.nawrocki@samsung.com>
On 09/13/2013 02:56 PM, Sylwester Nawrocki wrote:
> Simplify the FIMC mem-to-mem driver by using the m2m ioctl and vb2 helpers.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> Signed-off-by: Kyugmin Park <kyungmin.park@samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Regards,
Hans
> ---
> drivers/media/platform/exynos4-is/fimc-m2m.c | 119 +++-----------------------
> 1 file changed, 14 insertions(+), 105 deletions(-)
>
> diff --git a/drivers/media/platform/exynos4-is/fimc-m2m.c b/drivers/media/platform/exynos4-is/fimc-m2m.c
> index 8d33b68..71ee871 100644
> --- a/drivers/media/platform/exynos4-is/fimc-m2m.c
> +++ b/drivers/media/platform/exynos4-is/fimc-m2m.c
> @@ -226,24 +226,12 @@ static void fimc_buf_queue(struct vb2_buffer *vb)
> v4l2_m2m_buf_queue(ctx->m2m_ctx, vb);
> }
>
> -static void fimc_lock(struct vb2_queue *vq)
> -{
> - struct fimc_ctx *ctx = vb2_get_drv_priv(vq);
> - mutex_lock(&ctx->fimc_dev->lock);
> -}
> -
> -static void fimc_unlock(struct vb2_queue *vq)
> -{
> - struct fimc_ctx *ctx = vb2_get_drv_priv(vq);
> - mutex_unlock(&ctx->fimc_dev->lock);
> -}
> -
> static struct vb2_ops fimc_qops = {
> .queue_setup = fimc_queue_setup,
> .buf_prepare = fimc_buf_prepare,
> .buf_queue = fimc_buf_queue,
> - .wait_prepare = fimc_unlock,
> - .wait_finish = fimc_lock,
> + .wait_prepare = vb2_ops_wait_prepare,
> + .wait_finish = vb2_ops_wait_finish,
> .stop_streaming = stop_streaming,
> .start_streaming = start_streaming,
> };
> @@ -410,56 +398,6 @@ static int fimc_m2m_s_fmt_mplane(struct file *file, void *fh,
> return 0;
> }
>
> -static int fimc_m2m_reqbufs(struct file *file, void *fh,
> - struct v4l2_requestbuffers *reqbufs)
> -{
> - struct fimc_ctx *ctx = fh_to_ctx(fh);
> - return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs);
> -}
> -
> -static int fimc_m2m_querybuf(struct file *file, void *fh,
> - struct v4l2_buffer *buf)
> -{
> - struct fimc_ctx *ctx = fh_to_ctx(fh);
> - return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf);
> -}
> -
> -static int fimc_m2m_qbuf(struct file *file, void *fh,
> - struct v4l2_buffer *buf)
> -{
> - struct fimc_ctx *ctx = fh_to_ctx(fh);
> - return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf);
> -}
> -
> -static int fimc_m2m_dqbuf(struct file *file, void *fh,
> - struct v4l2_buffer *buf)
> -{
> - struct fimc_ctx *ctx = fh_to_ctx(fh);
> - return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
> -}
> -
> -static int fimc_m2m_expbuf(struct file *file, void *fh,
> - struct v4l2_exportbuffer *eb)
> -{
> - struct fimc_ctx *ctx = fh_to_ctx(fh);
> - return v4l2_m2m_expbuf(file, ctx->m2m_ctx, eb);
> -}
> -
> -
> -static int fimc_m2m_streamon(struct file *file, void *fh,
> - enum v4l2_buf_type type)
> -{
> - struct fimc_ctx *ctx = fh_to_ctx(fh);
> - return v4l2_m2m_streamon(file, ctx->m2m_ctx, type);
> -}
> -
> -static int fimc_m2m_streamoff(struct file *file, void *fh,
> - enum v4l2_buf_type type)
> -{
> - struct fimc_ctx *ctx = fh_to_ctx(fh);
> - return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type);
> -}
> -
> static int fimc_m2m_cropcap(struct file *file, void *fh,
> struct v4l2_cropcap *cr)
> {
> @@ -598,13 +536,13 @@ static const struct v4l2_ioctl_ops fimc_m2m_ioctl_ops = {
> .vidioc_try_fmt_vid_out_mplane = fimc_m2m_try_fmt_mplane,
> .vidioc_s_fmt_vid_cap_mplane = fimc_m2m_s_fmt_mplane,
> .vidioc_s_fmt_vid_out_mplane = fimc_m2m_s_fmt_mplane,
> - .vidioc_reqbufs = fimc_m2m_reqbufs,
> - .vidioc_querybuf = fimc_m2m_querybuf,
> - .vidioc_qbuf = fimc_m2m_qbuf,
> - .vidioc_dqbuf = fimc_m2m_dqbuf,
> - .vidioc_expbuf = fimc_m2m_expbuf,
> - .vidioc_streamon = fimc_m2m_streamon,
> - .vidioc_streamoff = fimc_m2m_streamoff,
> + .vidioc_reqbufs = v4l2_m2m_ioctl_reqbufs,
> + .vidioc_querybuf = v4l2_m2m_ioctl_querybuf,
> + .vidioc_qbuf = v4l2_m2m_ioctl_qbuf,
> + .vidioc_dqbuf = v4l2_m2m_ioctl_dqbuf,
> + .vidioc_expbuf = v4l2_m2m_ioctl_expbuf,
> + .vidioc_streamon = v4l2_m2m_ioctl_streamon,
> + .vidioc_streamoff = v4l2_m2m_ioctl_streamoff,
> .vidioc_g_crop = fimc_m2m_g_crop,
> .vidioc_s_crop = fimc_m2m_s_crop,
> .vidioc_cropcap = fimc_m2m_cropcap
> @@ -624,6 +562,7 @@ static int queue_init(void *priv, struct vb2_queue *src_vq,
> src_vq->mem_ops = &vb2_dma_contig_memops;
> src_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> src_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> + src_vq->lock = &ctx->fimc_dev->lock;
>
> ret = vb2_queue_init(src_vq);
> if (ret)
> @@ -636,6 +575,7 @@ static int queue_init(void *priv, struct vb2_queue *src_vq,
> dst_vq->mem_ops = &vb2_dma_contig_memops;
> dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
> dst_vq->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_COPY;
> + dst_vq->lock = &ctx->fimc_dev->lock;
>
> return vb2_queue_init(dst_vq);
> }
> @@ -713,6 +653,7 @@ static int fimc_m2m_open(struct file *file)
> ret = PTR_ERR(ctx->m2m_ctx);
> goto error_c;
> }
> + ctx->fh.m2m_ctx = ctx->m2m_ctx;
>
> if (fimc->m2m.refcnt++ == 0)
> set_bit(ST_M2M_RUN, &fimc->state);
> @@ -760,45 +701,13 @@ static int fimc_m2m_release(struct file *file)
> return 0;
> }
>
> -static unsigned int fimc_m2m_poll(struct file *file,
> - struct poll_table_struct *wait)
> -{
> - struct fimc_ctx *ctx = fh_to_ctx(file->private_data);
> - struct fimc_dev *fimc = ctx->fimc_dev;
> - int ret;
> -
> - if (mutex_lock_interruptible(&fimc->lock))
> - return -ERESTARTSYS;
> -
> - ret = v4l2_m2m_poll(file, ctx->m2m_ctx, wait);
> - mutex_unlock(&fimc->lock);
> -
> - return ret;
> -}
> -
> -
> -static int fimc_m2m_mmap(struct file *file, struct vm_area_struct *vma)
> -{
> - struct fimc_ctx *ctx = fh_to_ctx(file->private_data);
> - struct fimc_dev *fimc = ctx->fimc_dev;
> - int ret;
> -
> - if (mutex_lock_interruptible(&fimc->lock))
> - return -ERESTARTSYS;
> -
> - ret = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma);
> - mutex_unlock(&fimc->lock);
> -
> - return ret;
> -}
> -
> static const struct v4l2_file_operations fimc_m2m_fops = {
> .owner = THIS_MODULE,
> .open = fimc_m2m_open,
> .release = fimc_m2m_release,
> - .poll = fimc_m2m_poll,
> + .poll = v4l2_m2m_fop_poll,
> .unlocked_ioctl = video_ioctl2,
> - .mmap = fimc_m2m_mmap,
> + .mmap = v4l2_m2m_fop_mmap,
> };
>
> static struct v4l2_m2m_ops m2m_ops = {
>
next prev parent reply other threads:[~2013-09-30 9:44 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-13 12:56 [PATCH RFC 0/7] V4L2 mem-to-mem ioctl helpers Sylwester Nawrocki
2013-09-13 12:56 ` [PATCH RFC 1/7] V4L: Add mem2mem ioctl and file operation helpers Sylwester Nawrocki
2013-09-13 13:13 ` Philipp Zabel
2013-09-15 21:11 ` Sylwester Nawrocki
2013-09-30 9:41 ` Hans Verkuil
2013-10-12 11:02 ` Sylwester Nawrocki
2013-09-13 12:56 ` [PATCH RFC 2/7] mem2mem_testdev: Use mem-to-mem ioctl and vb2 helpers Sylwester Nawrocki
2013-09-13 13:08 ` Philipp Zabel
2013-09-15 20:58 ` Sylwester Nawrocki
2013-09-16 7:24 ` Philipp Zabel
2013-09-30 9:43 ` Hans Verkuil
2013-09-13 12:56 ` [PATCH RFC 3/7] exynos4-is: Use mem-to-mem ioctl helpers Sylwester Nawrocki
2013-09-30 9:44 ` Hans Verkuil [this message]
2013-09-13 12:56 ` [PATCH RFC 4/7] s5p-jpeg: " Sylwester Nawrocki
2013-09-30 9:45 ` Hans Verkuil
2013-09-13 12:56 ` [PATCH RFC 5/7] mx2-emmaprp: " Sylwester Nawrocki
2013-09-30 9:47 ` Hans Verkuil
2013-10-12 11:11 ` Sylwester Nawrocki
2013-09-13 12:56 ` [PATCH RFC 6/7] exynos-gsc: " Sylwester Nawrocki
2013-09-13 14:12 ` Shaik Ameer Basha
2013-09-15 21:40 ` Sylwester Nawrocki
2013-09-30 9:50 ` Hans Verkuil
2013-10-12 11:20 ` Sylwester Nawrocki
2013-09-13 12:56 ` [PATCH RFC 7/7] s5p-g2d: " Sylwester Nawrocki
2013-09-30 9:49 ` Hans Verkuil
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=52494802.6020805@xs4all.nl \
--to=hverkuil@xs4all.nl \
--cc=arun.kk@samsung.com \
--cc=javier.martin@vista-silicon.com \
--cc=k.debski@samsung.com \
--cc=kyungmin.park@samsung.com \
--cc=linux-media@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=pawel@osciak.com \
--cc=s.nawrocki@samsung.com \
--cc=shaik.ameer@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox