Re: [PATCH 2/8 v4] crypto:s5p-sss: Add device tree support

[Sylwester Nawrocki <s.nawrocki@samsung.com>]

Hi,

(Adding missing devicetre ML list at CC.)

On 15/01/14 10:14, Naveen Krishna Chatradhi wrote:
> This patch adds device tree support to the s5p-sss.c crypto driver.
> 
> Also, Documentation under devicetree/bindings added.
> 
> Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com>
> CC: Herbert Xu <herbert@gondor.apana.org.au>
> CC: David S. Miller <davem@davemloft.net>
> CC: Vladimir Zapolskiy <vzapolskiy@gmail.com>
> TO: <linux-crypto@vger.kernel.org>
> CC: <linux-samsung-soc@vger.kernel.org>
> ---
> Changes since v3:
> None
> 
>  .../devicetree/bindings/crypto/samsung-sss.txt     |   20 ++++++++++++++++++++
>  drivers/crypto/s5p-sss.c                           |   10 +++++++++-
>  2 files changed, 29 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/crypto/samsung-sss.txt
> 
> diff --git a/Documentation/devicetree/bindings/crypto/samsung-sss.txt b/Documentation/devicetree/bindings/crypto/samsung-sss.txt
> new file mode 100644
> index 0000000..2f9d7e4
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/samsung-sss.txt
> @@ -0,0 +1,20 @@
> +Samsung SoC SSS (Security SubSystem) module
> +
> +The SSS module in S5PV210 SoC supports the following:
> +-- Feeder (FeedCtrl)
> +-- Advanced Encryption Standard (AES)
> +-- Data Encryption Standard (DES)/3DES
> +-- Public Key Accelerator (PKA)
> +-- SHA-1/SHA-256/MD5/HMAC (SHA-1/SHA-256/MD5)/PRNG
> +-- PRNG: Pseudo Random Number Generator
> +
> +Required properties:
> +
> +- compatible : Should contain entries for this and backward compatible
> +  SSS versions:
> +  - "samsung,s5pv210-secss" for S5PV210 SoC.
> +- reg : Offset and length of the register set for the module
> +- interrupts : the interrupt-specifier for the SSS module.
> +		Two interrupts "feed control and hash" in case of S5PV210

It should be described in what order both interrupts are supposed to be
specified.

> +- clocks : the required gating clock for the SSS module.
> +- clock-names : the gating clock name to be requested in the SSS driver.
> diff --git a/drivers/crypto/s5p-sss.c b/drivers/crypto/s5p-sss.c
> index 93cddeb..2da5617 100644
> --- a/drivers/crypto/s5p-sss.c
> +++ b/drivers/crypto/s5p-sss.c
> @@ -22,6 +22,7 @@
>  #include <linux/scatterlist.h>
>  #include <linux/dma-mapping.h>
>  #include <linux/io.h>
> +#include <linux/of.h>
>  #include <linux/crypto.h>
>  #include <linux/interrupt.h>
>  
> @@ -177,6 +178,12 @@ struct s5p_aes_dev {
>  
>  static struct s5p_aes_dev *s5p_dev;
>  
> +static const struct of_device_id s5p_sss_dt_match[] = {
> +	{ .compatible = "samsung,s5pv210-secss", },

nit: the first semicolon could be omitted.

> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, s5p_sss_dt_match);
> +
>  static void s5p_set_dma_indata(struct s5p_aes_dev *dev, struct scatterlist *sg)
>  {
>  	SSS_WRITE(dev, FCBRDMAS, sg_dma_address(sg));
> @@ -676,7 +683,8 @@ static struct platform_driver s5p_aes_crypto = {
>  	.remove	= s5p_aes_remove,
>  	.driver	= {
>  		.owner	= THIS_MODULE,
> -		.name	= "s5p-secss",
> +		.name	= "s5pv210-secss",

Why you're changing the driver name ? It's not related and not needed AFAICT.

> +		.of_match_table = s5p_sss_dt_match,
>  	},
>  };

--
Thanks,
Sylwester