Linux Samsung SOC development
 help / color / mirror / Atom feed
From: Kukjin Kim <kgene.kim@samsung.com>
To: Mike Turquette <mturquette@linaro.org>
Cc: "Tomasz Figa" <tomasz.figa@gmail.com>,
	"Heiko Stübner" <heiko@sntech.de>,
	"Kukjin Kim" <kgene.kim@samsung.com>,
	t.figa@samsung.com, linux-samsung-soc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 0/5] ARM: S3C24XX: convert s3c2412 to common clock framework
Date: Tue, 25 Feb 2014 09:45:51 +0900	[thread overview]
Message-ID: <530BE7BF.7060306@samsung.com> (raw)
In-Reply-To: <20140224000603.22529.1282@quantum>

On 02/24/14 09:06, Mike Turquette wrote:
> Quoting Tomasz Figa (2014-02-22 16:48:45)
>> On 23.02.2014 01:29, Heiko Stübner wrote:
>>> Hi Tomasz,
>>>
>>> Am Sonntag, 23. Februar 2014, 00:49:56 schrieb Tomasz Figa:
>>>> Hi,
>>>>
>>>> On 22.02.2014 23:45, Heiko Stübner wrote:
>>>>> Second incarnation of the series converting s3c2412/s3c2413 to the common
>>>>> clock framework. As before the conversion is done by a mix of datasheet
>>>>> data and the pre-existing clock code and as this time I have no hardware
>>>>> of this type, it is compile-tested only. So hopefully somebody with
>>>>> s3c2412
>>>>> hw will be able to test it for real.
>>>>>
>>>>> The conversion of s3c2412 now moved in front of the
>>>>> s3c2410/s3c2440/s3c2442
>>>>> one, as I'll need a bit more time for the clockout changes suggested by
>>>>> Tomasz Figa.
>>>>>
>>>>> This series builds on top of the previous submitted s3c2443/s3c2416
>>>>> series.
>>>>>
>>>>>
>>>>> Changes since v1:
>>>>> - move in front of s3c2410 conversion, therefore move 2 necessary patches
>>>>>
>>>>>      that also got ACKs, from there into this series
>>>>>
>>>>> - adapt to Samsung clock pm rework from Tomasz Figa
>>>>> - apply some changes suggested by Tomasz Figa in the s3c2410 clock driver
>>>>>
>>>>>      that also apply to this driver.
>>>>>
>>>>> Heiko Stuebner (5):
>>>>>      ARM: S3C24XX: only store clock registers when old clock code is active
>>>>>      clk: samsung: add plls used by the early s3c24xx cpus
>>>>>      dt-bindings: add documentation for s3c2412 clock controller
>>>>>      clk: samsung: add clock controller driver for s3c2412
>>>>>      ARM: S3C24XX: convert s3c2412 to common clock framework
>>>>>
>>>>>     .../bindings/clock/samsung,s3c2412-clock.txt       |  50 ++
>>>>>     arch/arm/mach-s3c24xx/Kconfig                      |   8 +-
>>>>>     arch/arm/mach-s3c24xx/Makefile                     |   2 +-
>>>>>     arch/arm/mach-s3c24xx/clock-s3c2412.c              | 761
>>>>>     --------------------- arch/arm/mach-s3c24xx/common.c
>>>>>      |   9 +-
>>>>>     arch/arm/mach-s3c24xx/common.h                     |   4 +
>>>>>     arch/arm/mach-s3c24xx/mach-jive.c                  |   9 +-
>>>>>     arch/arm/mach-s3c24xx/mach-smdk2413.c              |   9 +-
>>>>>     arch/arm/mach-s3c24xx/mach-vstms.c                 |   9 +-
>>>>>     arch/arm/mach-s3c24xx/pm.c                         |  13 +-
>>>>>     arch/arm/mach-s3c24xx/s3c2412.c                    |  43 --
>>>>>     drivers/clk/samsung/Makefile                       |   1 +
>>>>>     drivers/clk/samsung/clk-pll.c                      | 182 +++++
>>>>>     drivers/clk/samsung/clk-pll.h                      |   3 +
>>>>>     drivers/clk/samsung/clk-s3c2412.c                  | 268 ++++++++
>>>>>     include/dt-bindings/clock/s3c2412.h                |  73 ++
>>>>>     16 files changed, 627 insertions(+), 817 deletions(-)
>>>>>     create mode 100644
>>>>>     Documentation/devicetree/bindings/clock/samsung,s3c2412-clock.txt
>>>>>     delete mode 100644 arch/arm/mach-s3c24xx/clock-s3c2412.c
>>>>>     create mode 100644 drivers/clk/samsung/clk-s3c2412.c
>>>>>     create mode 100644 include/dt-bindings/clock/s3c2412.h
>>>>
>>>> For mach and DT patches:
>>>>
>>>> Reviewed-by: Tomasz Figa<t.figa@samsung.com>
>>>>
>>>> Kukjin, I'll take binding and clock patches to Samsung clock tree as
>>>> soon as DT bindings get acked by one of DT maintainers. I will prepare a
>>>> branch for you to apply mach patches on top. Is it fine for you?
>>>
>>> I think Kukjin already applied the s3c2416/s3c2443 series on top of your
>>> clock-pm-changes in the linux-samsung tree [1], so it might be best to just
>>> pile this series on top of it.
>>
>> I'm aware of this, but I'm afraid this might cause conflicts with
>> remaining patches that I might have to apply in this release cycle.
>>
>> Patch clk/samsung: add support for multiple clock providers[1] is mostly
>> what I have in my mind, but there is also at least one patch that is
>> based on top of PM rework floating on the list.
>>
>> I'd try to sort this out first with Kukjin and if we fail we will have
>> to fall back to merging any clock patches through Samsung tree for this
>> release cycle.
>
YES!

> Better if we can sort it out, but if these patches must go through the
> samsung tree then please add my Ack.
>
Agreed and thanks.

Tomasz, I'll take this series with you and Mike's ack then if required, 
can you please merge the branch "v3.15-next/clk-s3c24xx" into your clk 
branch?

- Kukjin

      reply	other threads:[~2014-02-25  0:45 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-22 22:45 [PATCH v2 0/5] ARM: S3C24XX: convert s3c2412 to common clock framework Heiko Stübner
2014-02-22 22:45 ` [PATCH v2 1/5] ARM: S3C24XX: only store clock registers when old clock code is active Heiko Stübner
2014-02-22 22:46 ` [PATCH v2 2/5] clk: samsung: add plls used by the early s3c24xx cpus Heiko Stübner
2014-02-22 22:48 ` [PATCH v2 3/5] dt-bindings: add documentation for s3c2412 clock controller Heiko Stübner
2014-02-22 22:49 ` [PATCH v2 4/5] clk: samsung: add clock controller driver for s3c2412 Heiko Stübner
2014-02-22 22:50 ` [PATCH v2 5/5] ARM: S3C24XX: convert s3c2412 to common clock framework Heiko Stübner
2014-02-22 23:49 ` [PATCH v2 0/5] " Tomasz Figa
2014-02-23  0:29   ` Heiko Stübner
2014-02-23  0:48     ` Tomasz Figa
2014-02-24  0:06       ` Mike Turquette
2014-02-25  0:45         ` Kukjin Kim [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=530BE7BF.7060306@samsung.com \
    --to=kgene.kim@samsung.com \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=t.figa@samsung.com \
    --cc=tomasz.figa@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox