Linux Samsung SOC development
 help / color / mirror / Atom feed
From: Beomho Seo <beomho.seo-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
To: linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Tomasz Figa <t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
	Kukjin Kim <kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Cc: Myungjoo Ham
	<myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
	Chanwoo Choi <cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
	Jaehoon Chung
	<jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Subject: [PATCH v3 1/2] ARM: dts: add cm36651 light/proximity sensor node
Date: Tue, 20 May 2014 19:48:07 +0900	[thread overview]
Message-ID: <537B32E7.4070905@samsung.com> (raw)

Exynos4412-trats2 board have light/proximity sensor.
This patch add cm36651 light/ proximity sensor node for exynos4412.
cm36651 is required properties as below.
- Use i2c-gpio for cm36651 sensor.
- Use fixed regulator for the IR LED.
  It is a part of the cm36651 for proximity detection.
- cm36651 is i2c device driver so need to use i2c-gpio driver.

Signed-off-by: Beomho Seo <beomho.seo-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
Changes in v3:
- Remove "status" property.
- Change gpio/interrupt specified.

Changes in v2:
- None.
---
 arch/arm/boot/dts/exynos4412-trats2.dts |   27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index f621fd9..dda7517 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -21,6 +21,7 @@

 	aliases {
 		i2c9 = &i2c_ak8975;
+		i2c10 = &i2c_cm36651;
 	};

 	memory {
@@ -98,6 +99,16 @@
 			enable-active-high;
 			regulator-always-on;
 		};
+
+		ps_als_reg: voltage-regulator-5 {
+			compatible = "regulator-fixed";
+			regulator-name = "LED_A_3.0V";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			gpio = <&gpj0 5 0>;
+			enable-active-high;
+		};
+
 	};

 	gpio-keys {
@@ -558,6 +569,22 @@
 		};
 	};

+	i2c_cm36651: i2c-gpio-2 {
+		compatible = "i2c-gpio";
+		gpios = <&gpf0 0 1>, <&gpf0 1 1>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cm36651@18 {
+			compatible = "capella,cm36651";
+			reg = <0x18>;
+			interrupt-parent = <&gpx0>;
+			interrupts = <2 2>;
+			vled-supply = <&ps_als_reg>;
+		};
+	};
+
 	spi_1: spi@13930000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&spi1_bus>;
-- 
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

                 reply	other threads:[~2014-05-20 10:48 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=537B32E7.4070905@samsung.com \
    --to=beomho.seo-sze3o3uu22jbdgjk7y7tuq@public.gmane.org \
    --cc=cw00.choi-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=jh80.chung-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=t.figa-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox