From: Beomho Seo <beomho.seo@samsung.com>
To: linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org,
Tomasz Figa <t.figa@samsung.com>,
Kukjin Kim <kgene.kim@samsung.com>,
Sylwester Nawrocki <s.nawrocki@samsung.com>,
Thomas Abraham <thomas.abraham@linaro.org>
Cc: Myungjoo Ham <myungjoo.ham@samsung.com>,
Jaehoon Chung <jh80.chung@samsung.com>,
Chanwoo Choi <cw00.choi@samsung.com>
Subject: [PATCH] Documentation: remove gpio-samsung device tree bindings documentation
Date: Wed, 21 May 2014 20:22:27 +0900 [thread overview]
Message-ID: <537C8C73.8050606@samsung.com> (raw)
This patch remove gpio-samsung device tree bindings documentation.
Already a pictrl driver used for exynos4 and 5. If want to know about
gpio pin control(e.g. mux function, confiugration), refer to samsung-pinctrl
device tree bindings documentation.
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
---
.../devicetree/bindings/gpio/gpio-samsung.txt | 41 --------------------
1 file changed, 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-samsung.txt
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
deleted file mode 100644
index 5375625..0000000
--- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
+++ /dev/null
@@ -1,41 +0,0 @@
-Samsung Exynos4 GPIO Controller
-
-Required properties:
-- compatible: Compatible property value should be "samsung,exynos4-gpio>".
-
-- reg: Physical base address of the controller and length of memory mapped
- region.
-
-- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
- should be the following with values derived from the SoC user manual.
- <[phandle of the gpio controller node]
- [pin number within the gpio controller]
- [mux function]
- [flags and pull up/down]
- [drive strength]>
-
- Values for gpio specifier:
- - Pin number: is a value between 0 to 7.
- - Flags and Pull Up/Down: 0 - Pull Up/Down Disabled.
- 1 - Pull Down Enabled.
- 3 - Pull Up Enabled.
- Bit 16 (0x00010000) - Input is active low.
- - Drive Strength: 0 - 1x,
- 1 - 3x,
- 2 - 2x,
- 3 - 4x
-
-- gpio-controller: Specifies that the node is a gpio controller.
-- #address-cells: should be 1.
-- #size-cells: should be 1.
-
-Example:
-
- gpa0: gpio-controller@11400000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "samsung,exynos4-gpio";
- reg = <0x11400000 0x20>;
- #gpio-cells = <4>;
- gpio-controller;
- };
--
1.7.9.5
reply other threads:[~2014-05-21 11:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=537C8C73.8050606@samsung.com \
--to=beomho.seo@samsung.com \
--cc=cw00.choi@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=jh80.chung@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=myungjoo.ham@samsung.com \
--cc=s.nawrocki@samsung.com \
--cc=t.figa@samsung.com \
--cc=thomas.abraham@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox