From: Guenter Roeck <linux@roeck-us.net>
To: Kevin Hilman <khilman@kernel.org>, lm-sensors@lm-sensors.org
Cc: linux-samsung-soc@vger.kernel.org,
DOCUMENTATION <linux-doc@vger.kernel.org>,
Jonathan Corbet <corbet@lwn.net>,
open list <linux-kernel@vger.kernel.org>,
linaro-kernel@lists.linaro.org
Subject: Re: [PATCH v2] hwmon: (ina2xx) Add ina231 compatible string
Date: Wed, 14 Jan 2015 20:44:36 -0800 [thread overview]
Message-ID: <54B745B4.2040807@roeck-us.net> (raw)
In-Reply-To: <1421285699-8469-1-git-send-email-khilman@kernel.org>
On 01/14/2015 05:34 PM, Kevin Hilman wrote:
> From: Kevin Hilman <khilman@linaro.org>
>
> Add support for "ina231" as compatible string, and update
> Documentation and Kconfig accordingly.
>
> Tested with the Exynos5422-based odroid-xu3 board which has on-board
> INA231 sensors.
>
> Signed-off-by: Kevin Hilman <khilman@linaro.org>
Applied to -next after minor cleanup (see below).
> ---
> Documentation/hwmon/ina2xx | 9 +++++++++
> drivers/hwmon/Kconfig | 4 ++--
> drivers/hwmon/ina2xx.c | 1 +
> 3 files changed, 12 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx
> index 4223c2d3b508..c2f838f65ee4 100644
> --- a/Documentation/hwmon/ina2xx
> +++ b/Documentation/hwmon/ina2xx
> @@ -26,6 +26,12 @@ Supported chips:
> Datasheet: Publicly available at the Texas Instruments website
> http://www.ti.com/
>
> + * Texas Instruments INA231
> + Prefix: 'ina231'
> + Addresses: I2C 0x40 - 0x4f
> + Datasheet: Publicly available at the Texas Instruments website
> + http://www.ti.com/
> +
> Author: Lothar Felten <l-felten@ti.com>
>
> Description
> @@ -44,6 +50,9 @@ The INA226 monitors both a shunt voltage drop and bus supply voltage.
> The INA230 is a high or low side current shunt and power monitor with an I2C
> interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
>
> +The INA231 is a high or low side current shunt and power monitor with an I2C
> +interface. The INA230 monitors both a shunt voltage drop and bus supply voltage.
> +
The INA231 ...
I fixed this up and merged above two paragraphs into one.
Guenter
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2015-01-15 4:44 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-01-15 1:34 [PATCH v2] hwmon: (ina2xx) Add ina231 compatible string Kevin Hilman
2015-01-15 4:44 ` Guenter Roeck [this message]
2015-01-15 16:56 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54B745B4.2040807@roeck-us.net \
--to=linux@roeck-us.net \
--cc=corbet@lwn.net \
--cc=khilman@kernel.org \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox