Re: [1/2] ARM: dts: Fix bootup issue on smdk5250

[Pankaj Dubey <pankaj.dubey@samsung.com>]

Hi Kukjin,

On Saturday 22 November 2014 08:55 AM, Kukjin Kim wrote:
> Pankaj Dubey wrote:
>>
>> Hi,
>>
> Hi,
>
> Yadwinder, please don't miss [PATCH 1/2] in subject, so that my e-mail client
> can't filter wrong ;)
>
>> On Tuesday 18 November 2014 05:38 PM, Yadwinder Singh Brar wrote:
>>> With default config on smdk5250 latest tree throws below message :
>>>
>>> [    2.226049] thermal thermal_zone0: critical temperature reached(224 C),shutting down
>>> [    2.227840] reboot: Failed to start orderly shutdown: forcing the issue
>>>
>>> and hangs randomly because it reads wrong temperature value.
>>>
>>> I can't figure out any direct relation between LDO10 and TMU from board
>>> schematics which I have. So making LDO10 always-on to fix issue for now.
>>>
> Hmm...strange, I also can't see any relations now...but I need to contact to
> hardware guy before applying this, this fixes the problem though.
>

By any chance you got time to check with HW engineer, as issue is there 
without this patch, SMDK5250 fails to boot and hangs.

Thanks,
Pankaj Dubey

> Thanks,
> Kukjin
>
>>> Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
>>>
>>
>> Tested this on SMDK5250 board, system boot is fine now, hence
>>
>> Tested-by: Pankaj Dubey <pankaj.dubey@samsung.com>
>>
>>> ---
>>> arch/arm/boot/dts/exynos5250-smdk5250.dts |    1 +
>>>    1 files changed, 1 insertions(+), 0 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>>> index bc27cc2..95b5b51 100644
>>> --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
>>> +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
>>> @@ -190,6 +190,7 @@
>>>    				regulator-name = "P1.8V_LDO_OUT10";
>>>    				regulator-min-microvolt = <1800000>;
>>>    				regulator-max-microvolt = <1800000>;
>>> +				regulator-always-on;
>>>    			};
>>>
>>>    			ldo11_reg: LDO11 {
>>>
>
>