From: Joonyoung Shim <jy0922.shim@samsung.com>
To: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>,
linux-samsung-soc@vger.kernel.org
Cc: gustavo.padovan@collabora.co.uk, dri-devel@lists.freedesktop.org
Subject: Re: [PATCH 4/5] drm/exynos: mixer: do blending setup in mixer_cfg_layer()
Date: Fri, 22 May 2015 18:12:37 +0900 [thread overview]
Message-ID: <555EF305.3030001@samsung.com> (raw)
In-Reply-To: <1430919410-9917-5-git-send-email-tjakobi@math.uni-bielefeld.de>
On 05/06/2015 10:36 PM, Tobias Jakobi wrote:
> This updates the blending setup when the layer configuration
> changes (triggered by mixer_win_{commit,disable}).
>
> Extra care has to be taken for the layer that is currently
> being enabled/disabled.
>
> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
> ---
> drivers/gpu/drm/exynos/exynos_mixer.c | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
> index 3ab7a01..430d10c 100644
> --- a/drivers/gpu/drm/exynos/exynos_mixer.c
> +++ b/drivers/gpu/drm/exynos/exynos_mixer.c
> @@ -177,6 +177,18 @@ static inline bool is_alpha_format(const struct mixer_context* ctx, unsigned int
> }
> }
>
> +static inline unsigned int layer_bitmask(const struct mixer_context* ctx)
> +{
> + unsigned int i, mask = 0;
> +
> + for (i = 0; i < MIXER_WIN_NR; ++i) {
> + if (ctx->planes[i].enabled)
> + mask |= (1 << i);
> + }
> +
> + return mask;
> +}
> +
> static inline u32 vp_reg_read(struct mixer_resources *res, u32 reg_id)
> {
> return readl(res->vp_regs + reg_id);
> @@ -513,6 +525,7 @@ static void mixer_cfg_rgb_fmt(struct mixer_context *ctx, unsigned int height)
> static void mixer_cfg_layer(struct mixer_context *ctx, unsigned int win, bool enable)
> {
> struct mixer_resources *res = &ctx->mixer_res;
> + unsigned int enable_state;
> u32 val = enable ? ~0 : 0;
>
> switch (win) {
> @@ -530,6 +543,16 @@ static void mixer_cfg_layer(struct mixer_context *ctx, unsigned int win, bool en
> }
> break;
> }
> +
> + /* Determine the current enabled/disabled state of the layers. */
> + enable_state = layer_bitmask(ctx);
> + if (enable)
> + enable_state |= (1 << win);
> + else
> + enable_state &= ~(1 << win);
I think way to remove to get enable_state of plane everytime, maybe
using atomic state information?
> +
> + /* Layer configuration has changed, update blending setup. */
> + mixer_layer_blending(ctx, enable_state);
> }
>
> static void mixer_run(struct mixer_context *ctx)
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-05-22 9:12 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-06 13:36 [PATCH 0/5] drm/exynos: rework layer blending setup Tobias Jakobi
2015-05-06 13:36 ` [PATCH 1/5] drm/exynos: mixer: refactor layer setup Tobias Jakobi
2015-05-22 9:12 ` Joonyoung Shim
2015-05-22 9:47 ` Tobias Jakobi
2015-05-22 16:01 ` Tobias Jakobi
2015-05-06 13:36 ` [PATCH 2/5] drm/exynos: mixer: introduce mixer_layer_blending() Tobias Jakobi
2015-05-22 9:12 ` Joonyoung Shim
2015-05-22 9:49 ` Tobias Jakobi
2015-05-06 13:36 ` [PATCH 3/5] drm/exynos: mixer: remove all static blending setup Tobias Jakobi
2015-05-06 13:36 ` [PATCH 4/5] drm/exynos: mixer: do blending setup in mixer_cfg_layer() Tobias Jakobi
2015-05-22 9:12 ` Joonyoung Shim [this message]
2015-05-22 9:50 ` Tobias Jakobi
2015-05-06 13:36 ` [PATCH 5/5] drm/exynos: mixer: also allow ARGB1555 and ARGB4444 Tobias Jakobi
2015-05-07 20:57 ` [PATCH 0/5] drm/exynos: rework layer blending setup Gustavo Padovan
2015-05-21 20:44 ` Tobias Jakobi
2015-05-22 4:04 ` Joonyoung Shim
2015-05-22 8:07 ` Tobias Jakobi
2015-05-22 9:13 ` Joonyoung Shim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=555EF305.3030001@samsung.com \
--to=jy0922.shim@samsung.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=gustavo.padovan@collabora.co.uk \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=tjakobi@math.uni-bielefeld.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox