From: Joonyoung Shim <jy0922.shim@samsung.com>
To: Gustavo Padovan <gustavo@padovan.org>,
linux-samsung-soc@vger.kernel.org,
dri-devel@lists.freedesktop.org, inki.dae@samsung.com,
tjakobi@math.uni-bielefeld.de,
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Subject: Re: [PATCH 9/9] drm/exynos: unify exynos_drm_plane names with drm core
Date: Wed, 10 Jun 2015 18:46:03 +0900 [thread overview]
Message-ID: <5578075B.7020408@samsung.com> (raw)
In-Reply-To: <20150609142719.GA22853@joana>
On 06/09/2015 11:27 PM, Gustavo Padovan wrote:
> Hi Inki and Joonyoung,
>
> Any comments on this series?
I saw this series in brief and good mostly. I feel it can be better to
split a atomic patch and cleanup patches, it can make to merge easier.
It's problem to give late any feedback about patches posted, i will try
to review them but i have no time. Sorry about that again.
Thanks.
>
> 2015-06-03 Gustavo Padovan <gustavo@padovan.org>:
>
>> From: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
>>
>> Rename crtc_{widht,height} to crtc_{w,h} and src_{width,height} to
>> src_{w,h} to make it similar to the atomic state names.
>>
>> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
>> ---
>> drivers/gpu/drm/exynos/exynos7_drm_decon.c | 14 +++++++-------
>> drivers/gpu/drm/exynos/exynos_drm_drv.h | 16 ++++++++--------
>> drivers/gpu/drm/exynos/exynos_drm_fimd.c | 14 +++++++-------
>> drivers/gpu/drm/exynos/exynos_drm_plane.c | 11 ++++++-----
>> drivers/gpu/drm/exynos/exynos_mixer.c | 22 +++++++++++-----------
>> 5 files changed, 39 insertions(+), 38 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos7_drm_decon.c b/drivers/gpu/drm/exynos/exynos7_drm_decon.c
>> index 7a99237..4e63a9c 100644
>> --- a/drivers/gpu/drm/exynos/exynos7_drm_decon.c
>> +++ b/drivers/gpu/drm/exynos/exynos7_drm_decon.c
>> @@ -442,25 +442,25 @@ static void decon_update_plane(struct exynos_drm_crtc *crtc,
>> DRM_DEBUG_KMS("start addr = 0x%lx\n",
>> (unsigned long)val);
>> DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
>> - plane->crtc_width, plane->crtc_height);
>> + plane->crtc_w, plane->crtc_h);
>>
>> /*
>> * OSD position.
>> * In case the window layout goes of LCD layout, DECON fails.
>> */
>> - if ((plane->crtc_x + plane->crtc_width) > mode->hdisplay)
>> - plane->crtc_x = mode->hdisplay - plane->crtc_width;
>> - if ((plane->crtc_y + plane->crtc_height) > mode->vdisplay)
>> - plane->crtc_y = mode->vdisplay - plane->crtc_height;
>> + if ((plane->crtc_x + plane->crtc_w) > mode->hdisplay)
>> + plane->crtc_x = mode->hdisplay - plane->crtc_w;
>> + if ((plane->crtc_y + plane->crtc_h) > mode->vdisplay)
>> + plane->crtc_y = mode->vdisplay - plane->crtc_h;
>>
>> val = VIDOSDxA_TOPLEFT_X(plane->crtc_x) |
>> VIDOSDxA_TOPLEFT_Y(plane->crtc_y);
>> writel(val, ctx->regs + VIDOSD_A(win));
>>
>> - last_x = plane->crtc_x + plane->crtc_width;
>> + last_x = plane->crtc_x + plane->crtc_w;
>> if (last_x)
>> last_x--;
>> - last_y = plane->crtc_y + plane->crtc_height;
>> + last_y = plane->crtc_y + plane->crtc_h;
>> if (last_y)
>> last_y--;
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> index b83d487..7c6196e 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
>> @@ -51,12 +51,12 @@ enum exynos_drm_output_type {
>> * - the unit is screen coordinates.
>> * @src_y: offset y on a framebuffer to be displayed.
>> * - the unit is screen coordinates.
>> - * @src_width: width of a partial image to be displayed from framebuffer.
>> - * @src_height: height of a partial image to be displayed from framebuffer.
>> + * @src_w: width of a partial image to be displayed from framebuffer.
>> + * @src_h: height of a partial image to be displayed from framebuffer.
>> * @crtc_x: offset x on hardware screen.
>> * @crtc_y: offset y on hardware screen.
>> - * @crtc_width: window width to be displayed (hardware screen).
>> - * @crtc_height: window height to be displayed (hardware screen).
>> + * @crtc_w: window width to be displayed (hardware screen).
>> + * @crtc_h: window height to be displayed (hardware screen).
>> * @h_ratio: horizontal scaling ratio, 16.16 fixed point
>> * @v_ratio: vertical scaling ratio, 16.16 fixed point
>> * @dma_addr: array of bus(accessed by dma) address to the memory region
>> @@ -73,12 +73,12 @@ struct exynos_drm_plane {
>> struct drm_plane base;
>> unsigned int src_x;
>> unsigned int src_y;
>> - unsigned int src_width;
>> - unsigned int src_height;
>> + unsigned int src_w;
>> + unsigned int src_h;
>> unsigned int crtc_x;
>> unsigned int crtc_y;
>> - unsigned int crtc_width;
>> - unsigned int crtc_height;
>> + unsigned int crtc_w;
>> + unsigned int crtc_h;
>> unsigned int h_ratio;
>> unsigned int v_ratio;
>> dma_addr_t dma_addr[MAX_FB_BUFFER];
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
>> index 2ece83b..920727b 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
>> @@ -659,18 +659,18 @@ static void fimd_update_plane(struct exynos_drm_crtc *crtc,
>> writel(val, ctx->regs + VIDWx_BUF_START(win, 0));
>>
>> /* buffer end address */
>> - size = pitch * plane->crtc_height;
>> + size = pitch * plane->crtc_h;
>> val = (unsigned long)(dma_addr + size);
>> writel(val, ctx->regs + VIDWx_BUF_END(win, 0));
>>
>> DRM_DEBUG_KMS("start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n",
>> (unsigned long)dma_addr, val, size);
>> DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
>> - plane->crtc_width, plane->crtc_height);
>> + plane->crtc_w, plane->crtc_h);
>>
>> /* buffer size */
>> - buf_offsize = pitch - (plane->crtc_width * bpp);
>> - line_size = plane->crtc_width * bpp;
>> + buf_offsize = pitch - (plane->crtc_w * bpp);
>> + line_size = plane->crtc_w * bpp;
>> val = VIDW_BUF_SIZE_OFFSET(buf_offsize) |
>> VIDW_BUF_SIZE_PAGEWIDTH(line_size) |
>> VIDW_BUF_SIZE_OFFSET_E(buf_offsize) |
>> @@ -684,10 +684,10 @@ static void fimd_update_plane(struct exynos_drm_crtc *crtc,
>> VIDOSDxA_TOPLEFT_Y_E(plane->crtc_y);
>> writel(val, ctx->regs + VIDOSD_A(win));
>>
>> - last_x = plane->crtc_x + plane->crtc_width;
>> + last_x = plane->crtc_x + plane->crtc_w;
>> if (last_x)
>> last_x--;
>> - last_y = plane->crtc_y + plane->crtc_height;
>> + last_y = plane->crtc_y + plane->crtc_h;
>> if (last_y)
>> last_y--;
>>
>> @@ -704,7 +704,7 @@ static void fimd_update_plane(struct exynos_drm_crtc *crtc,
>> u32 offset = VIDOSD_D(win);
>> if (win == 0)
>> offset = VIDOSD_C(win);
>> - val = plane->crtc_width * plane->crtc_height;
>> + val = plane->crtc_w * plane->crtc_h;
>> writel(val, ctx->regs + offset);
>>
>> DRM_DEBUG_KMS("osd size = 0x%x\n", (unsigned int)val);
>> diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c
>> index 9602797..bebc957 100644
>> --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c
>> +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c
>> @@ -97,17 +97,18 @@ static void exynos_plane_mode_set(struct drm_plane *plane,
>> /* set drm framebuffer data. */
>> exynos_plane->src_x = src_x;
>> exynos_plane->src_y = src_y;
>> - exynos_plane->src_width = (actual_w * exynos_plane->h_ratio) >> 16;
>> - exynos_plane->src_height = (actual_h * exynos_plane->v_ratio) >> 16;
>> + exynos_plane->src_w = (actual_w * exynos_plane->h_ratio) >> 16;
>> + exynos_plane->src_h = (actual_h * exynos_plane->v_ratio) >> 16;
>>
>> /* set plane range to be displayed. */
>> exynos_plane->crtc_x = crtc_x;
>> exynos_plane->crtc_y = crtc_y;
>> - exynos_plane->crtc_width = actual_w;
>> - exynos_plane->crtc_height = actual_h;
>> + exynos_plane->crtc_w = actual_w;
>> + exynos_plane->crtc_h = actual_h;
>> +
>> DRM_DEBUG_KMS("plane : offset_x/y(%d,%d), width/height(%d,%d)",
>> exynos_plane->crtc_x, exynos_plane->crtc_y,
>> - exynos_plane->crtc_width, exynos_plane->crtc_height);
>> + exynos_plane->crtc_w, exynos_plane->crtc_h);
>>
>> plane->crtc = crtc;
>> }
>> diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c
>> index 4fbafc9..f8ef8c6 100644
>> --- a/drivers/gpu/drm/exynos/exynos_mixer.c
>> +++ b/drivers/gpu/drm/exynos/exynos_mixer.c
>> @@ -443,19 +443,19 @@ static void vp_video_buffer(struct mixer_context *ctx,
>> vp_reg_write(res, VP_IMG_SIZE_C, VP_IMG_HSIZE(fb->pitches[0]) |
>> VP_IMG_VSIZE(fb->height / 2));
>>
>> - vp_reg_write(res, VP_SRC_WIDTH, plane->src_width);
>> - vp_reg_write(res, VP_SRC_HEIGHT, plane->src_height);
>> + vp_reg_write(res, VP_SRC_WIDTH, plane->src_w);
>> + vp_reg_write(res, VP_SRC_HEIGHT, plane->src_h);
>> vp_reg_write(res, VP_SRC_H_POSITION,
>> VP_SRC_H_POSITION_VAL(plane->src_x));
>> vp_reg_write(res, VP_SRC_V_POSITION, plane->src_y);
>>
>> - vp_reg_write(res, VP_DST_WIDTH, plane->crtc_width);
>> + vp_reg_write(res, VP_DST_WIDTH, plane->crtc_w);
>> vp_reg_write(res, VP_DST_H_POSITION, plane->crtc_x);
>> if (ctx->interlace) {
>> - vp_reg_write(res, VP_DST_HEIGHT, plane->crtc_height / 2);
>> + vp_reg_write(res, VP_DST_HEIGHT, plane->crtc_h / 2);
>> vp_reg_write(res, VP_DST_V_POSITION, plane->crtc_y / 2);
>> } else {
>> - vp_reg_write(res, VP_DST_HEIGHT, plane->crtc_height);
>> + vp_reg_write(res, VP_DST_HEIGHT, plane->crtc_h);
>> vp_reg_write(res, VP_DST_V_POSITION, plane->crtc_y);
>> }
>>
>> @@ -492,15 +492,15 @@ static void mixer_layer_update(struct mixer_context *ctx)
>> static int mixer_setup_scale(const struct exynos_drm_plane *plane,
>> unsigned int *x_ratio, unsigned int *y_ratio)
>> {
>> - if (plane->crtc_width != plane->src_width) {
>> - if (plane->crtc_width == 2 * plane->src_width)
>> + if (plane->crtc_w != plane->src_w) {
>> + if (plane->crtc_w == 2 * plane->src_w)
>> *x_ratio = 1;
>> else
>> goto fail;
>> }
>>
>> - if (plane->crtc_height != plane->src_height) {
>> - if (plane->crtc_height == 2 * plane->src_height)
>> + if (plane->crtc_h != plane->src_h) {
>> + if (plane->crtc_h == 2 * plane->src_h)
>> *y_ratio = 1;
>> else
>> goto fail;
>> @@ -589,8 +589,8 @@ static void mixer_graph_buffer(struct mixer_context *ctx,
>> mixer_reg_write(res, MXR_RESOLUTION, val);
>> }
>>
>> - val = MXR_GRP_WH_WIDTH(plane->src_width);
>> - val |= MXR_GRP_WH_HEIGHT(plane->src_height);
>> + val = MXR_GRP_WH_WIDTH(plane->src_w);
>> + val |= MXR_GRP_WH_HEIGHT(plane->src_h);
>> val |= MXR_GRP_WH_H_SCALE(x_ratio);
>> val |= MXR_GRP_WH_V_SCALE(y_ratio);
>> mixer_reg_write(res, MXR_GRAPHIC_WH(win), val);
>> --
>> 2.1.0
>>
>
> Gustavo
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2015-06-10 9:46 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-03 14:30 [PATCH 1/9] drm/exynos: add error messages if clks failed to get enabled Gustavo Padovan
2015-06-03 14:30 ` [PATCH 2/9] drm/exynos: add atomic asynchronous commit Gustavo Padovan
2015-06-10 9:45 ` Joonyoung Shim
2015-06-03 14:30 ` [PATCH 3/9] drm/exynos: rename win_commit/disable to atomic-like names Gustavo Padovan
2015-06-03 14:30 ` [PATCH 4/9] drm/exynos: don't disable planes already disabled Gustavo Padovan
2015-06-03 14:30 ` [PATCH 5/9] drm/exynos: pass struct exynos_drm_plane in update/enable Gustavo Padovan
2015-06-03 14:30 ` [PATCH 6/9] drm/exynos: remove duplicated check for suspend Gustavo Padovan
2015-06-03 14:30 ` [PATCH 7/9] drm/exynos: use drm atomic state directly Gustavo Padovan
2015-06-03 14:30 ` [PATCH 8/9] drm/exynos: remove unused fields from struct exynos_drm_plane Gustavo Padovan
2015-06-03 14:30 ` [PATCH 9/9] drm/exynos: unify exynos_drm_plane names with drm core Gustavo Padovan
2015-06-09 14:27 ` Gustavo Padovan
2015-06-10 9:46 ` Joonyoung Shim [this message]
2015-06-10 10:42 ` Inki Dae
2015-06-10 10:48 ` Inki Dae
2015-06-03 16:59 ` [PATCH 1/9] drm/exynos: add error messages if clks failed to get enabled Alexey Klimov
2015-06-03 17:09 ` Alexey Klimov
2015-06-03 18:13 ` Gustavo Padovan
2015-06-03 20:17 ` [PATCH v2] " Gustavo Padovan
2015-06-11 14:12 ` Inki Dae
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5578075B.7020408@samsung.com \
--to=jy0922.shim@samsung.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=gustavo.padovan@collabora.co.uk \
--cc=gustavo@padovan.org \
--cc=inki.dae@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=tjakobi@math.uni-bielefeld.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox