Linux Samsung SOC development
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
To: Yakir Yang <ykk-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
	Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
	Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
	Jingoo Han <jingoohan1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Fabio Estevam
	<fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
	Inki Dae <inki.dae-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
	joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org,
	Russell King <rmk+kernel-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
Cc: seanpaul-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	Takashi Iwai <tiwai-l3A5Bk7waGM@public.gmane.org>,
	dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
	Andrzej Hajda <a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
	Gustavo Padovan
	<gustavo.padovan-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>,
	linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Vincent Palatin
	<vpalatin-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	David Airlie <airlied-cv59FeDIM0c@public.gmane.org>,
	dianders-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Mark Yao <mark.yao-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Kyungmin Park
	<kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
	djkurtz-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org,
	Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	ajaynumb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	Andy Yan <andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Subject: Re: [PATCH v3 08/14] phy: Add driver for rockchip Display Port PHY
Date: Thu, 20 Aug 2015 10:10:30 +0530	[thread overview]
Message-ID: <55D55A3E.8090905@ti.com> (raw)
In-Reply-To: <1439995877-18496-1-git-send-email-ykk-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

Hi,

On Wednesday 19 August 2015 08:21 PM, Yakir Yang wrote:
> Signed-off-by: Yakir Yang <ykk-TNX95d0MmH7DzftRWevZcw@public.gmane.org>

where's the commit message?
> ---
> Changes in v3:
> - Take Heiko suggest, add rockchip dp phy driver,
>   collect the phy clocks and power control.
> 
> Changes in v2: None
> 
>  .../devicetree/bindings/phy/rockchip-dp-phy.txt    |  26 +++
>  drivers/phy/Kconfig                                |   7 +
>  drivers/phy/Makefile                               |   1 +
>  drivers/phy/phy-rockchip-dp.c                      | 185 +++++++++++++++++++++
>  4 files changed, 219 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
>  create mode 100644 drivers/phy/phy-rockchip-dp.c
> 
> diff --git a/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
> new file mode 100644
> index 0000000..5de1088
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt
> @@ -0,0 +1,26 @@
> +Rockchip Soc Seroes Display Port PHY
> +------------------------------------
> +
> +Required properties:
> +- compatible : should be one of the following supported values:
> +	 - "rockchip.rk3288-dp-phy"
> +
> +- reg : a list of registers used by phy driver
> +- clocks: from common clock binding: handle to dp clock.
> +	of memory mapped region.
> +- clock-names: from common clock binding:
> +	Required elements: "sclk_dp" "sclk_dp_24m"
> +
> +- rockchip,grf: this soc should set GRF regs, so need get grf here.
> +- #phy-cells : from the generic PHY bindings, must be 0;
> +
> +Example:
> +
> +edp_phy: phy@ff770274 {
> +	compatilble = "rockchip,rk3288-dp-phy";
> +	reg = <0xff770274 4>;
> +	rockchip,grf = <&grf>;
> +	clocks = <&cru SCLK_EDP_24M>;
> +	clock-names = "24m";
> +	#phy-cells = <0>;
> +}
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 6b8dd16..da00440 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -297,6 +297,13 @@ config PHY_ROCKCHIP_USB
>  	help
>  	  Enable this to support the Rockchip USB 2.0 PHY.
>  
> +config PHY_ROCKCHIP_DP
> +	tristate "Rockchip Display Port PHY Driver"
> +	depends on ARCH_ROCKCHIP && OF
> +	select GENERIC_PHY
> +	help
> +	  Enable this to support the Rockchip Display Port PHY.
> +
>  config PHY_ST_SPEAR1310_MIPHY
>  	tristate "ST SPEAR1310-MIPHY driver"
>  	select GENERIC_PHY
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index f344e1b..35e3ce6 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -33,6 +33,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
>  obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
>  obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
>  obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
> +obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
>  obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
>  obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
>  obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
> diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
> new file mode 100644
> index 0000000..4759111
> --- /dev/null
> +++ b/drivers/phy/phy-rockchip-dp.c
> @@ -0,0 +1,185 @@
> +/*
> + * Rockchip DP PHY driver
> + *
> + * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
> + * Author: Yakir Yang <ykk@@rock-chips.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License.
> + */
> +
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/clk.h>
> +#include <linux/phy/phy.h>
> +#include <linux/regmap.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/platform_device.h>
> +
> +#define GRF_SOC_CON12                   0x0274
> +#define GRF_EDP_REF_CLK_SEL_INTER       BIT(4)
> +
> +#define DP_PHY_SIDDQ_WRITE_EN           BIT(21)
> +#define DP_PHY_SIDDQ_ON                 0
> +#define DP_PHY_SIDDQ_OFF                BIT(5)
> +
> +struct rockchip_dp_phy {
> +	struct device  *dev;
> +	struct regmap  *grf;
> +	void __iomem   *regs;
> +	struct clk     *phy_24m;
> +};
> +
> +static int rockchip_dp_phy_clk_enable(struct rockchip_dp_phy *dp)
> +{
> +	int ret = 0;
> +
> +	ret = clk_set_rate(dp->phy_24m, 24000000);
> +	if (ret < 0) {
> +		dev_err(dp->dev, "cannot set clock phy_24m %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(dp->phy_24m);
> +	if (ret < 0) {
> +		dev_err(dp->dev, "cannot enable clock phy_24m %d\n", ret);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int rockchip_dp_phy_clk_disable(struct rockchip_dp_phy *dp)
> +{
> +	clk_disable_unprepare(dp->phy_24m);
> +
> +	return 0;
> +}
> +
> +static int rockchip_set_phy_state(struct phy *phy, bool enable)
> +{
> +	struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
> +
> +	if (enable) {
> +		rockchip_dp_phy_clk_enable(dp);
> +		writel(DP_PHY_SIDDQ_WRITE_EN | DP_PHY_SIDDQ_ON, dp->regs);
> +	} else {
> +		rockchip_dp_phy_clk_disable(dp);
> +		writel(DP_PHY_SIDDQ_WRITE_EN | DP_PHY_SIDDQ_OFF, dp->regs);
> +	}
> +
> +	return 0;
> +}
> +
> +static int rockchip_dp_phy_power_on(struct phy *phy)
> +{
> +	return rockchip_set_phy_state(phy, true);
> +}
> +
> +static int rockchip_dp_phy_power_off(struct phy *phy)
> +{
> +	return rockchip_set_phy_state(phy, false);
> +}
> +
> +static struct phy_ops rockchip_dp_phy_ops = {
> +	.power_on	= rockchip_dp_phy_power_on,
> +	.power_off	= rockchip_dp_phy_power_off,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static int rockchip_dp_phy_init(struct rockchip_dp_phy *dp)
> +{
> +	struct device *dev = dp->dev;
> +	struct device_node *np = dev->of_node;
> +	int ret;
> +
> +	dp->phy_24m = devm_clk_get(dev, "24m");
> +	if (IS_ERR(dp->phy_24m)) {
> +		dev_err(dev, "cannot get clock 24m\n");
> +		return PTR_ERR(dp->phy_24m);
> +	}
> +
> +	ret = rockchip_dp_phy_clk_enable(dp);
> +	if (ret < 0) {
> +		dev_err(dp->dev, "cannot enable dp phy clk %d\n", ret);
> +		return ret;
> +	}
> +
> +	dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
> +	if (IS_ERR(dp->grf)) {
> +		dev_err(dev, "rk3288-dp needs rockchip,grf property\n");
> +		return PTR_ERR(dp->grf);
> +	}
> +
> +	ret = regmap_write(dp->grf, GRF_SOC_CON12,
> +			   GRF_EDP_REF_CLK_SEL_INTER |
> +			   (GRF_EDP_REF_CLK_SEL_INTER << 16));
> +	if (ret != 0) {
> +		dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret);
> +		return ret;
> +	}

This function can be split to do only clk_get and syscon_regmap_lookup in
probe, clk_enable and regmap_write in phy_init?
> +
> +	return 0;
> +}
> +
> +static int rockchip_dp_phy_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct phy_provider *phy_provider;
> +	struct rockchip_dp_phy *dp;
> +	struct resource *res;
> +	struct phy *phy;
> +	int ret;
> +
> +	dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
> +	if (IS_ERR(dp))
> +		return -ENOMEM;
> +
> +	dp->dev = dev;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	dp->regs = devm_ioremap_resource(dev, res);
> +	if (IS_ERR(dp->regs))
> +		return PTR_ERR(dp->regs);
> +
> +	ret = rockchip_dp_phy_init(dp);
> +	if (ret)
> +		return ret;
> +
> +	phy = devm_phy_create(dev, NULL, &rockchip_dp_phy_ops, NULL);
> +	if (IS_ERR(phy)) {
> +		dev_err(dev, "failed to create phy\n");
> +		return PTR_ERR(phy);
> +	}
> +	phy_set_drvdata(phy, dp);
> +
> +	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
> +
> +	return PTR_ERR_OR_ZERO(phy_provider);
> +}
> +
> +static const struct of_device_id rockchip_dp_phy_dt_ids[] = {
> +	{ .compatible = "rockchip,rk3288-dp-phy" },
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(of, rockchip_dp_phy_dt_ids);
> +
> +static struct platform_driver rockchip_dp_phy_driver = {
> +	.probe		= rockchip_dp_phy_probe,
> +	.driver		= {
> +		.name	= "rockchip-dp-phy",
> +		.owner	= THIS_MODULE,

owner is not required here.

Thanks
Kishon

  parent reply	other threads:[~2015-08-20  4:40 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-08-19 14:48 [PATCH v3 0/14] Add Analogix Core Display Port Driver Yakir Yang
2015-08-19 14:49 ` [PATCH v3 01/14] drm: exynos/dp: fix code style Yakir Yang
2015-08-19 14:49 ` [PATCH v3 02/14] drm: exynos/dp: convert to drm bridge mode Yakir Yang
2015-08-19 14:50 ` [PATCH v3 04/14] drm: bridge/analogix_dp: dynamic parse sync_pol & interlace & colorimetry Yakir Yang
2015-08-19 14:50 ` [PATCH v3 05/14] drm: bridge/analogix_dp: fix link_rate & lane_count bug Yakir Yang
2015-08-20  7:22   ` Jingoo Han
2015-08-20  8:04     ` Yakir Yang
2015-08-19 14:50 ` [PATCH v3 06/14] Documentation: drm/bridge: add document for analogix_dp Yakir Yang
2015-08-23 23:23   ` Rob Herring
2015-08-24  0:43     ` Krzysztof Kozlowski
2015-08-24  2:42       ` Yakir Yang
     [not found]         ` <55DA8486.1000803-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-08-24  4:20           ` Krzysztof Kozlowski
2015-08-24 12:48             ` Yakir Yang
2015-08-24 13:03               ` Heiko Stuebner
2015-08-25  1:37                 ` Yakir Yang
2015-08-24 23:49               ` Krzysztof Kozlowski
2015-08-25  1:33                 ` Yakir Yang
2015-08-25  1:35                   ` Krzysztof Kozlowski
2015-08-24  7:40       ` Jingoo Han
2015-08-24 12:55         ` Yakir Yang
2015-08-24  2:19     ` Yakir Yang
     [not found]     ` <CAL_JsqLz+8RtBucctUj4euXZ3Ac0DvB52N9ONpAerh5T9BiTJg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-08-24 12:57       ` Russell King - ARM Linux
2015-08-24 14:48         ` Rob Herring
2015-08-24 16:16           ` Heiko Stuebner
2015-08-25  1:21           ` Yakir Yang
2015-08-25  9:12           ` Thierry Reding
     [not found]             ` <20150825091246.GA14034-AwZRO8vwLAwmlAP/+Wk3EA@public.gmane.org>
2015-08-25  9:29               ` Russell King - ARM Linux
2015-08-25 10:40                 ` Thierry Reding
     [not found]                   ` <20150825104000.GE14034-AwZRO8vwLAwmlAP/+Wk3EA@public.gmane.org>
2015-08-25 10:52                     ` Russell King - ARM Linux
2015-08-25  9:41             ` Yakir Yang
2015-08-25 10:06               ` Thierry Reding
2015-08-25 14:02                 ` Yakir Yang
2015-08-25  9:15     ` Thierry Reding
2015-08-25  9:37       ` Yakir Yang
2015-08-25 13:27       ` Rob Herring
2015-08-25 13:48         ` Yakir Yang
2015-08-25 14:16           ` Thierry Reding
2015-08-25 14:23             ` Yakir Yang
2015-08-25  9:58   ` Thierry Reding
     [not found]     ` <20150825095817.GC14034-AwZRO8vwLAwmlAP/+Wk3EA@public.gmane.org>
2015-08-25 14:03       ` Yakir Yang
2015-08-25 14:21         ` Thierry Reding
2015-08-25 15:57           ` Russell King - ARM Linux
     [not found] ` <1439995728-18046-1-git-send-email-ykk-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-08-19 14:50   ` [PATCH v3 03/14] drm: bridge: analogix_dp: split exynos dp driver to bridge dir Yakir Yang
2015-08-19 14:50   ` [PATCH v3 07/14] drm: rockchip/dp: add rockchip platform dp driver Yakir Yang
2015-08-19 14:51   ` [PATCH v3 09/14] drm: bridge/analogix_dp: add platform device type support Yakir Yang
2015-08-19 14:52   ` [PATCH v3 12/14] drm: bridge/analogix_dp: expand the delay time for hpd detect Yakir Yang
2015-08-20  6:11     ` Jingoo Han
2015-08-20  8:02       ` Yakir Yang
2015-08-21  8:20   ` [PATCH v3 0/14] Add Analogix Core Display Port Driver Jingoo Han
2015-08-21 10:01     ` Yakir Yang
2015-08-21 11:24       ` Jingoo Han
2015-08-21 13:16         ` Thierry Reding
2015-08-22 10:13           ` Yakir Yang
2015-08-30 12:16           ` Romain Perier
2015-08-31  2:40             ` Yakir Yang
2015-08-22  9:42         ` Yakir Yang
2015-08-19 14:51 ` [PATCH v3 08/14] phy: Add driver for rockchip Display Port PHY Yakir Yang
     [not found]   ` <1439995877-18496-1-git-send-email-ykk-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2015-08-20  4:40     ` Kishon Vijay Abraham I [this message]
2015-08-20  6:56       ` Yakir Yang
2015-08-20  7:01         ` Yakir Yang
2015-08-19 14:51 ` [PATCH v3 10/14] drm: bridge: analogix_dp: add some rk3288 special registers setting Yakir Yang
2015-08-19 14:51 ` [PATCH v3 11/14] drm: bridge: analogix_dp: try force hpd after plug in lookup failed Yakir Yang
2015-08-19 14:52 ` [PATCH v3 13/14] drm: bridge/analogix_dp: move hpd detect to connector detect function Yakir Yang
2015-08-20  7:49   ` Jingoo Han
     [not found]     ` <6E5CEF9B-19D4-4AC4-B5B1-BC667979302D-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2015-08-20  8:18       ` Yakir Yang
2015-08-19 14:52 ` [PATCH v3 14/14] drm: bridge/analogix_dp: add edid modes parse in get_modes method Yakir Yang
2015-08-19 23:54 ` [PATCH v3 0/14] Add Analogix Core Display Port Driver Dave Airlie
2015-08-20  1:02   ` Yakir Yang
2015-08-20  4:29 ` Archit Taneja
2015-08-20  5:54   ` Jingoo Han
2015-08-20  6:23     ` Yakir Yang
2015-08-20  6:55       ` Jingoo Han
2015-08-20  8:03         ` Yakir Yang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=55D55A3E.8090905@ti.com \
    --to=kishon-l0cymroini0@public.gmane.org \
    --cc=a.hajda-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=airlied-cv59FeDIM0c@public.gmane.org \
    --cc=ajaynumb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=andy.yan-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dianders-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=djkurtz-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
    --cc=fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=gustavo.padovan-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org \
    --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=inki.dae-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=jingoohan1-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=joe-6d6DIl74uiNBDgjK7y7TUQ@public.gmane.org \
    --cc=kyungmin.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.yao-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    --cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=rmk+kernel-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=seanpaul-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
    --cc=tiwai-l3A5Bk7waGM@public.gmane.org \
    --cc=treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
    --cc=vpalatin-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
    --cc=ykk-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox