Re: [PATCH v5 1/5] drm: add generic zpos property

[Tobias Jakobi <tjakobi@math.uni-bielefeld.de>]

Hello,

just voicing my interest in having this feature in DRM core.

- Tobias


Daniel Vetter wrote:
> On Mon, May 09, 2016 at 10:42:45AM +0200, Benjamin Gaignard wrote:
>> Hello,
>>
>> I little up in this topic.
>> If generic z-order patches can't land into drm core,
>> I wille have to resend the patch to enable it within STI driver:
>> https://lists.freedesktop.org/archives/dri-devel/2016-January/098140.html
> 
> It's the patch author's duty to ping folks for reviews to move a patch
> forward. That doesn't happen automatically.
> 
> It helps though if you cc everyone who commented on earlier iterations (I
> prefer Cc: lines in the commit message). Ville seems to have not been
> added for this one here.
> 
> Also there's a metric pile of driver patches that floated around to
> convert them over to core zpos. Can you pls pick those up too?
> 
> I definitely want to land this in drm core, so not going to take a
> ragequite-I'll-do-it-in-my-driver for an answer ;-)
> 
> Thanks, Daniel
> 
>>
>> Regards,
>> Benjamin
>>
>> 2016-04-01 14:48 GMT+02:00 Benjamin Gaignard <benjamin.gaignard@linaro.org>:
>>> This patch adds support for generic plane's zpos property property with
>>> well-defined semantics:
>>> - added zpos properties to plane and plane state structures
>>> - added helpers for normalizing zpos properties of given set of planes
>>> - well defined semantics: planes are sorted by zpos values and then plane
>>>   id value if zpos equals
>>>
>>> Normalized zpos values are calculated automatically when generic
>>> muttable zpos property has been initialized. Drivers can simply use
>>> plane_state->normalized_zpos in their atomic_check and/or plane_update
>>> callbacks without any additional calls to DRM core.
>>>
>>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>>>
>>> Compare to Marek's original patch zpos property is now specific to each
>>> plane and no more to the core.
>>> Normalize function take care of the range of per plane defined range
>>> before set normalized_zpos.
>>>
>>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
>>> ---
>>>  Documentation/DocBook/gpu.tmpl      |  10 ++
>>>  drivers/gpu/drm/Makefile            |   2 +-
>>>  drivers/gpu/drm/drm_atomic_helper.c |   6 +
>>>  drivers/gpu/drm/drm_blend.c         | 283 ++++++++++++++++++++++++++++++++++++
>>>  drivers/gpu/drm/drm_crtc_internal.h |   3 +
>>>  include/drm/drm_crtc.h              |  25 ++++
>>>  6 files changed, 328 insertions(+), 1 deletion(-)
>>>  create mode 100644 drivers/gpu/drm/drm_blend.c
>>>
>>> diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl
>>> index 1692c4d..b7a5161 100644
>>> --- a/Documentation/DocBook/gpu.tmpl
>>> +++ b/Documentation/DocBook/gpu.tmpl
>>> @@ -2147,6 +2147,16 @@ void intel_crt_init(struct drm_device *dev)
>>>   the underlying hardware).</td>
>>>   </tr>
>>>   <tr>
>>> + <td valign="top" > "zpos" </td>
>>> + <td valign="top" >RANGE</td>
>>> + <td valign="top" >Min= driver dependent, Max= driver dependent</td>
>>> + <td valign="top" >Plane</td>
>>> + <td valign="top" >Plane's 'z' position during blending operation (0
>>> for background, highest for frontmost).
>>> + If two planes assigned to same CRTC have equal zpos values, the
>>> plane with higher plane
>>> + id is treated as closer to front. Can be IMMUTABLE if driver doesn't
>>> support changing
>>> + planes' order. Exact value range is driver dependent.</td>
>>> + </tr>
>>> + <tr>
>>>   <td rowspan="20" valign="top" >i915</td>
>>>   <td rowspan="2" valign="top" >Generic</td>
>>>   <td valign="top" >"Broadcast RGB"</td>
>>> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
>>> index 6eb94fc..18dc563 100644
>>> --- a/drivers/gpu/drm/Makefile
>>> +++ b/drivers/gpu/drm/Makefile
>>> @@ -2,7 +2,7 @@
>>>  # Makefile for the drm device driver.  This driver provides support for the
>>
>>
>>
>> -- 
>> Benjamin Gaignard
>>
>> Graphic Working Group
>>
>> Linaro.org │ Open source software for ARM SoCs
>>
>> Follow Linaro: Facebook | Twitter | Blog
> 

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel