Linux Samsung SOC development
 help / color / mirror / Atom feed
From: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
To: Markus Reichl <m.reichl@fivetechno.de>,
	Tobias Jakobi <tjakobi@math.uni-bielefeld.de>,
	"moderated list:ARM/S5P EXYNOS AR..."
	<linux-samsung-soc@vger.kernel.org>
Cc: Chanwoo Choi <cw00.choi@samsung.com>,
	MyungJoo Ham <myungjoo.ham@samsung.com>
Subject: Re: PM / devfreq: exynos-bus: need for suspend OPP?
Date: Mon, 21 Nov 2016 16:16:24 +0100	[thread overview]
Message-ID: <58330FC8.5090606@math.uni-bielefeld.de> (raw)
In-Reply-To: <7d5d2c7c-6ebb-b4c1-5f3f-f794c249ca36@fivetechno.de>

Hello Markus,


Markus Reichl wrote:
> Hi Tobias,
> 
> Am 21.11.2016 um 14:33 schrieb Tobias Jakobi:
>> Hello everyone,
>>
>> I was thinking about the following. At the moment we have a suspend OPP
>> for cpufreq-dt in place for the Exynos4412 SoC (added in
>> 1605b60ad064c7019db8ade07f0b7bdc8c197b93). The rationale behind is that
>> the board using the SoC might not have some PMIC reset in place. In case
>> the board goes into reboot with a low OPP (i.e. low frequency, but also
>> low core voltage), this results in a hang when the first-stage
>> bootloaders sets its default core frequency.
>>
>> So this is properly handled in the kernel just fine, except for some
>> corner cases like emergency reboot.
>>
>> But some time ago devfreq support for the various busses in the
>> Exynos4412 was added. On the ODROID boards e.g. this adjust MIF and INT
>> voltage.
>>
>> Let us take the DMC bus. Operating frequency is 100~400MHz and voltage
>> is 900~1050mV.
>>
>> Now let's look at the corresponding board file
>> (http://git.denx.de/?p=u-boot.git;a=blob;f=board/samsung/odroid/odroid.c#l234)
>> in upstream u-boot. If I read this correctly DMC is set to 400MHz there.
>>
>> Here's the question. Could this, similar to the cpufreq/core frequency
>> issue, pose a problem when the kernel goes into reboot when DMC is on
>> the lowest OPP state?
>>
>> I'm not saying that it does. This just came to my mind during some
>> recent discussion.
> 
> Made a test with
> # echo performance > /sys/class/devfreq/bus_leftbus/governor 
> # echo performance > /sys/class/devfreq/bus_dmc/governor 
> just before reboot.
> 
> 20 out of 20 reboots worked.
> 
> With devfreq simple_ondemand governor around 50% reboots hung.
thanks for the tests. I assume by 'reboots hung' you mean that the boot
process doesn't even reach u-boot?

- Tobias


> This could support your thoughts above.
> 
> Servus,
> --
> Markus
>>
>>
>> With best wishes,
>> Tobias
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

  parent reply	other threads:[~2016-11-21 15:16 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-21 13:33 PM / devfreq: exynos-bus: need for suspend OPP? Tobias Jakobi
2016-11-21 14:48 ` Markus Reichl
2016-11-21 15:06   ` MyungJoo Ham
2016-11-21 15:23     ` Tobias Jakobi
2016-11-21 16:21       ` MyungJoo Ham
2016-11-21 22:15         ` Tobias Jakobi
2016-11-22 12:39           ` MyungJoo Ham
2016-11-23 13:55             ` Tobias Jakobi
2016-11-21 15:16   ` Tobias Jakobi [this message]
2016-11-21 18:10     ` Markus Reichl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=58330FC8.5090606@math.uni-bielefeld.de \
    --to=tjakobi@math.uni-bielefeld.de \
    --cc=cw00.choi@samsung.com \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.reichl@fivetechno.de \
    --cc=myungjoo.ham@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox