Linux Samsung SOC development
 help / color / mirror / Atom feed
From: Inki Dae <inki.dae@samsung.com>
To: Andrzej Hajda <a.hajda@samsung.com>,
	dri-devel@lists.freedesktop.org,
	Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>,
	linux-kernel@vger.kernel.org,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Subject: Re: [PATCH 4/7] drm/exynos/hdmi: add bridge support
Date: Wed, 01 Feb 2017 16:44:27 +0900	[thread overview]
Message-ID: <589191DB.5000304@samsung.com> (raw)
In-Reply-To: <53bb68fd-5de0-6b3d-df3e-e961ba3fd0fb@samsung.com>



2017년 02월 01일 16:34에 Andrzej Hajda 이(가) 쓴 글:
> On 01.02.2017 08:31, Inki Dae wrote:
>>
>> 2017년 01월 20일 15:52에 Andrzej Hajda 이(가) 쓴 글:
>>> In some platforms there is attached another device to the end of HDMI.
>>> The patch adds support for it.
>> Andrzej, can you clarify what bridge device can be attached and actually is now attached to the end of HDMI?
>> And I wonder if we have the device tree file which defines the bridge device in mainline. Seems we have no the device tree file.
>>
>> If nothing, then this patch should be merged with real use case.
> 
> SiI8620 MHL bridge in tm2/tm2e.

Did you post dt patch to add the properties related to SiI8620 MHL bridge device?

I see below patch series,
[PATCH 00/24] drm/bridge/sii8620: add Ultra HD modes support

but I couldn't find dt patch for it. And specifying SiI8620 MHL bridge device as description would be needed.

Thanks.

> 
> Regards
> Andrzej
> 
>>
>> Thanks.
>>
>>> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
>>> ---
>>>  drivers/gpu/drm/exynos/exynos_hdmi.c | 56 +++++++++++++++++++++++++++++-------
>>>  1 file changed, 46 insertions(+), 10 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
>>> index a73b192..41fb894 100644
>>> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
>>> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
>>> @@ -35,6 +35,7 @@
>>>  #include <linux/io.h>
>>>  #include <linux/of_address.h>
>>>  #include <linux/of_device.h>
>>> +#include <linux/of_graph.h>
>>>  #include <linux/hdmi.h>
>>>  #include <linux/component.h>
>>>  #include <linux/mfd/syscon.h>
>>> @@ -133,6 +134,7 @@ struct hdmi_context {
>>>  	struct regulator_bulk_data	regul_bulk[ARRAY_SIZE(supply)];
>>>  	struct regulator		*reg_hdmi_en;
>>>  	struct exynos_drm_clk		phy_clk;
>>> +	struct drm_bridge		*bridge;
>>>  };
>>>  
>>>  static inline struct hdmi_context *encoder_to_hdmi(struct drm_encoder *e)
>>> @@ -922,7 +924,15 @@ static int hdmi_create_connector(struct drm_encoder *encoder)
>>>  	drm_connector_register(connector);
>>>  	drm_mode_connector_attach_encoder(connector, encoder);
>>>  
>>> -	return 0;
>>> +	if (hdata->bridge) {
>>> +		encoder->bridge = hdata->bridge;
>>> +		hdata->bridge->encoder = encoder;
>>> +		ret = drm_bridge_attach(encoder->dev, hdata->bridge);
>>> +		if (ret)
>>> +			DRM_ERROR("Failed to attach bridge\n");
>>> +	}
>>> +
>>> +	return ret;
>>>  }
>>>  
>>>  static bool hdmi_mode_fixup(struct drm_encoder *encoder,
>>> @@ -1591,6 +1601,31 @@ static void hdmiphy_clk_enable(struct exynos_drm_clk *clk, bool enable)
>>>  		hdmiphy_disable(hdata);
>>>  }
>>>  
>>> +static int hdmi_bridge_init(struct hdmi_context *hdata)
>>> +{
>>> +	struct device *dev = hdata->dev;
>>> +	struct device_node *ep, *np;
>>> +
>>> +	ep = of_graph_get_endpoint_by_regs(dev->of_node, 1, -1);
>>> +	if (!ep)
>>> +		return 0;
>>> +
>>> +	np = of_graph_get_remote_port_parent(ep);
>>> +	of_node_put(ep);
>>> +	if (!np) {
>>> +		DRM_ERROR("failed to get remote port parent");
>>> +		return -EINVAL;
>>> +	}
>>> +
>>> +	hdata->bridge = of_drm_find_bridge(np);
>>> +	of_node_put(np);
>>> +
>>> +	if (!hdata->bridge)
>>> +		return -EPROBE_DEFER;
>>> +
>>> +	return 0;
>>> +}
>>> +
>>>  static int hdmi_resources_init(struct hdmi_context *hdata)
>>>  {
>>>  	struct device *dev = hdata->dev;
>>> @@ -1630,17 +1665,18 @@ static int hdmi_resources_init(struct hdmi_context *hdata)
>>>  
>>>  	hdata->reg_hdmi_en = devm_regulator_get_optional(dev, "hdmi-en");
>>>  
>>> -	if (PTR_ERR(hdata->reg_hdmi_en) == -ENODEV)
>>> -		return 0;
>>> +	if (PTR_ERR(hdata->reg_hdmi_en) != -ENODEV) {
>>> +		if (IS_ERR(hdata->reg_hdmi_en))
>>> +			return PTR_ERR(hdata->reg_hdmi_en);
>>>  
>>> -	if (IS_ERR(hdata->reg_hdmi_en))
>>> -		return PTR_ERR(hdata->reg_hdmi_en);
>>> -
>>> -	ret = regulator_enable(hdata->reg_hdmi_en);
>>> -	if (ret)
>>> -		DRM_ERROR("failed to enable hdmi-en regulator\n");
>>> +		ret = regulator_enable(hdata->reg_hdmi_en);
>>> +		if (ret) {
>>> +			DRM_ERROR("failed to enable hdmi-en regulator\n");
>>> +			return ret;
>>> +		}
>>> +	}
>>>  
>>> -	return ret;
>>> +	return hdmi_bridge_init(hdata);
>>>  }
>>>  
>>>  static struct of_device_id hdmi_match_types[] = {
>>>
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2017-02-01  7:44 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20170120065229eucas1p22f0eed53220820b1145294029d4bd706@eucas1p2.samsung.com>
2017-01-20  6:52 ` [PATCH 0/7] drm/exynos: add Ultra HD and interlace modes support to Exynos5433 Andrzej Hajda
2017-01-20  6:52   ` [PATCH 1/7] drm/exynos/hdmi: add 297MHz pixel clock support Andrzej Hajda
2017-01-20  6:52   ` [PATCH 2/7] drm/exynos/hdmi: fix VSI infoframe registers Andrzej Hajda
2017-01-20  6:52   ` [PATCH 3/7] drm/exynos/hdmi: fix PLL for 27MHz settings Andrzej Hajda
2017-01-20  6:52   ` [PATCH 4/7] drm/exynos/hdmi: add bridge support Andrzej Hajda
2017-02-01  7:31     ` Inki Dae
2017-02-01  7:34       ` Andrzej Hajda
2017-02-01  7:44         ` Inki Dae [this message]
2017-02-01  8:12           ` Andrzej Hajda
2017-02-01  8:17             ` Inki Dae
2017-02-01  8:29               ` [PATCH v3 " Andrzej Hajda
2017-02-03  6:38                 ` Inki Dae
2017-02-03  6:39                   ` Inki Dae
2017-01-20  6:52   ` [PATCH 5/7] drm/exynos/decon5433: add support for interlace modes Andrzej Hajda
2017-01-20  6:52   ` [PATCH 6/7] drm/exynos/decon5433: signal vblank only on odd fields Andrzej Hajda
2017-01-20 13:55     ` Ville Syrjälä
2017-01-23  9:15       ` Andrzej Hajda
2017-01-25 14:06         ` Ville Syrjälä
2017-01-26  8:22           ` Andrzej Hajda
2017-01-26 10:42             ` Ville Syrjälä
2017-01-20  6:52   ` [PATCH 7/7] arm64: dts: exynos: configure TV path clocks for Ultra HD modes Andrzej Hajda
2017-01-20 14:51     ` Krzysztof Kozlowski
2017-01-23  7:56       ` [PATCH v2 " Andrzej Hajda
2017-01-23  9:08         ` Marek Szyprowski
2017-01-23 10:05           ` [PATCH v3 " Andrzej Hajda
2017-01-23 16:35             ` Krzysztof Kozlowski
2017-01-20 14:49   ` [PATCH 0/7] drm/exynos: add Ultra HD and interlace modes support to Exynos5433 Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=589191DB.5000304@samsung.com \
    --to=inki.dae@samsung.com \
    --cc=a.hajda@samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=krzk@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox