From: Tomasz Figa <tomasz.figa@gmail.com>
To: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Cc: Leela Krishna Amudala <l.krishna@samsung.com>,
linux-samsung-soc@vger.kernel.org, wim@iguana.be,
dianders@chromium.org, kgene.kim@samsung.com, t.figa@samsung.com,
devicetree@vger.kernel.org, linux-watchdog@vger.kernel.org,
cpgs@samsung.com, linux@roeck-us.net
Subject: Re: [PATCH V12 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files
Date: Sat, 07 Dec 2013 01:57:27 +0100 [thread overview]
Message-ID: <8302228.6iSJIFqj3A@flatron> (raw)
In-Reply-To: <52A207D8.3030206@gmail.com>
Hi Sylwester,
On Friday 06 of December 2013 18:22:32 Sylwester Nawrocki wrote:
> Hi,
>
> Just a few minor comments...
I wouldn't really nitpick on such things, but if we end up needing another
respin, here's what I think.
>
> On 12/06/2013 06:47 AM, Leela Krishna Amudala wrote:
> > This patch adds pmusysreg node to exynos5250 and exynos5420 dtsi files to
>
> s/pmusysreg/PMU sysreg ? Similarly I would capitalize it in the subject
> line as well.
Well, since this is supposed to be a human readable description, I would
go even further and write "...device tree node of Power Management Unit
to...".
>
> > handle PMU register accesses in a centralized way using syscon driver
> >
> > Signed-off-by: Leela Krishna Amudala<l.krishna@samsung.com>
> > Reviewed-by: Tomasz Figa<t.figa@samsung.com>
> > Reviewed-by: Doug Anderson<dianders@chromium.org>
> > Tested-by: Doug Anderson<dianders@chromium.org>
> > ---
> > Documentation/devicetree/bindings/arm/samsung/pmu.txt | 15 +++++++++++++++
> > arch/arm/boot/dts/exynos5250.dtsi | 5 +++++
> > arch/arm/boot/dts/exynos5420.dtsi | 5 +++++
> > 3 files changed, 25 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt
> >
> > diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> > new file mode 100644
> > index 0000000..f1f1552
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
>
> I might be easy to confuse this with ARM Performance Monitoring Unit.
> So perhaps we should rename this file to, e.g. power-management-unit.txt ?
Considering location of this file, which is arm/samsung, I think this
name is pretty much clear. ARM PMU is a generic thing, so it couldn't
be placed here.
>
> > @@ -0,0 +1,15 @@
> > +SAMSUNG Exynos SoC series PMU Registers
>
> s/PMU/Power Management Unit ?
s/PMU Registers/Power Management Unit/
>
> > +
> > +Properties:
> > + - compatible : should contain two values. First value must be one from following list:
> > + - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
> > + - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
>
> s/./; ?
>
> > + second value must be always "syscon".
>
> It might be more safe to specify it as the last value, so something along
> the lines of:
>
> The last value should be "syscon".
>
> > +
> > + - reg : offset and length of the register set.
> > +
> > +Example :
> > +pmu_system_controller: system-controller@10040000 {
>
> Might be more sensible to use 'power_management_unit' for the label.
That's quite a lot of text for a label. pmu_syscon as in previous version
of this patch would look more sensible to me.
>
> > + compatible = "samsung,exynos5250-pmu", "syscon";
> > + reg =<0x10040000 0x5000>;
> > +};
> > diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
> > index b98ffc3..62f9e36 100644
> > --- a/arch/arm/boot/dts/exynos5250.dtsi
> > +++ b/arch/arm/boot/dts/exynos5250.dtsi
> > @@ -163,6 +163,11 @@
> > interrupts =<0 47 0>;
> > };
> >
> > + pmu_system_controller: system-controller@10040000 {
>
> s/pmu_system_controller/power_management_unit ? So it describes the
> subsystem
> better in terms used in the SoCs User Manual ?
See above.
>
> > + compatible = "samsung,exynos5250-pmu", "syscon";
> > + reg =<0x10040000 0x5000>;
> > + };
> > +
> > watchdog {
> > clocks =<&clock 336>;
> > clock-names = "watchdog";
> > diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
> > index b1fa334..cd47db0 100644
> > --- a/arch/arm/boot/dts/exynos5420.dtsi
> > +++ b/arch/arm/boot/dts/exynos5420.dtsi
> > @@ -402,4 +402,9 @@
> > clock-names = "gscl";
> > samsung,power-domain =<&gsc_pd>;
> > };
> > +
> > + pmu_system_controller: system-controller@10040000 {
>
> s/pmu_system_controller/power_management_unit ?
See above.
Best regards,
Tomasz
next prev parent reply other threads:[~2013-12-07 0:57 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-06 5:47 [PATCH V12 0/3] Add watchdog DT nodes and use syscon regmap interface to configure pmu registers Leela Krishna Amudala
2013-12-06 5:47 ` [PATCH V12 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files Leela Krishna Amudala
2013-12-06 16:38 ` Doug Anderson
[not found] ` <1386308868-30264-2-git-send-email-l.krishna-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-12-06 17:22 ` Sylwester Nawrocki
2013-12-07 0:57 ` Tomasz Figa [this message]
2013-12-07 22:20 ` Sylwester Nawrocki
2013-12-11 12:22 ` Leela Krishna Amudala
2013-12-11 22:57 ` Doug Anderson
2013-12-11 23:57 ` Tomasz Figa
2013-12-12 11:32 ` Leela Krishna Amudala
2013-12-06 19:47 ` Guenter Roeck
2013-12-06 23:01 ` Doug Anderson
2013-12-07 0:48 ` Guenter Roeck
2014-01-10 7:41 ` Wim Van Sebroeck
2014-01-20 4:09 ` Leela Krishna Amudala
2014-01-21 5:08 ` kgene
2013-12-06 5:47 ` [PATCH V12 2/3] watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register Leela Krishna Amudala
2013-12-06 16:41 ` Doug Anderson
2013-12-06 19:48 ` Guenter Roeck
2014-01-10 7:38 ` Wim Van Sebroeck
2013-12-06 5:47 ` [PATCH V12 3/3] ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420 Leela Krishna Amudala
2013-12-06 19:48 ` Guenter Roeck
2014-01-20 4:10 ` Leela Krishna Amudala
2013-12-18 12:01 ` [PATCH V12 0/3] Add watchdog DT nodes and use syscon regmap interface to configure pmu registers Leela Krishna Amudala
2014-01-08 11:55 ` Leela Krishna Amudala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8302228.6iSJIFqj3A@flatron \
--to=tomasz.figa@gmail.com \
--cc=cpgs@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=kgene.kim@samsung.com \
--cc=l.krishna@samsung.com \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=sylvester.nawrocki@gmail.com \
--cc=t.figa@samsung.com \
--cc=wim@iguana.be \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox