Re: [PATCH v3 08/16] irqchip/gic: Configure SGIs as standard interrupts

[Jon Hunter <jonathanh@nvidia.com>]

On 17/09/2020 09:45, Marc Zyngier wrote:
> On 2020-09-17 08:54, Jon Hunter wrote:
>> On 17/09/2020 08:50, Marc Zyngier wrote:
>>> Hi Linus,
>>>
>>> On 2020-09-17 08:40, Linus Walleij wrote:
>>>> On Wed, Sep 16, 2020 at 5:11 PM Marc Zyngier <maz@kernel.org> wrote:
>>>>
>>>>> Can you try the patch below and let me know?
>>>>
>>>> I tried this patch and now Ux500 WORKS. So this patch is definitely
>>>> something you should apply.
>>>>
>>>>> -                       if (is_frankengic())
>>>>> -                               set_sgi_intid(irqstat);
>>>>> +                       this_cpu_write(sgi_intid, intid);
>>>>
>>>> This needs changing to irqstat to compile as pointed out by Jon.
>>>>
>>>> With that:
>>>> Tested-by: Linus Walleij <linus.walleij@linaro.org>
>>>
>>> Thanks a lot for that.
>>>
>>> Still need to understand why some of Jon's systems are left unbootable,
>>> despite having similar GIC implementations (Tegra194 and Tegra210 use
>>> the same GIC-400, and yet only one of the two boots correctly...).
>>
>> So far, I have only tested this patch on Tegra20. Let me try the other
>> failing boards this morning and see if those still fail.
> 
> Tegra20 (if I remember well) is a dual A9 with the same GIC implementation
> as Ux500, hence requiring the source CPU bits to be written back. So this
> patch should have cured it, but didn't...
> 
> /me puzzled.

Me too. Maybe there just happens to be something else also going wrong
in next. I am doing a bit more testing to see if applying the fix
directly on top of this change fixes it to try and eliminate anything
else in -next.

Linus, what -next are you testing on? I am using next-20200916.

Jon

-- 
nvpublic