RE: [PATCH -next] scsi: ufs: fix configuring power mode after UIC link down

["Subhash Jadavani" <subhashj@codeaurora.org>]

Hi Akinobu,

Thanks for the patch. After you reported the issue, I was looking through
our driver to make sure that why this issue was not catched and in fact it's
already have a fix internally and it was yet to be send upstream.
I am fine with your patch but our approach to fix the mentioned issue looks
more complete.
Here is what how we fixed it: 
	- After UFS link startup in ufshcd_probe(), link would anyway be in
PWM-G1, 1-lane, SLOW-AUTO mode so we would call a function namated
ufshcd_init_pwr_info() which would set the hba->pwr_info to reflect the
correct power mode after link startup. Here is the code reference:
https://www.codeaurora.org/cgit/quic/femto/kernel/msm-3.10/tree/drivers/scsi
/ufs/ufshcd.c?h=caf/msm-3.10#n4818. It would be good if you can adapt this
fix in your current patch.

/**
 * ufshcd_init_pwr_info - setting the POR (power on reset)
 * values in hba power info
 * @hba: per-adapter instance
 */
static void ufshcd_init_pwr_info(struct ufs_hba *hba)
{
	hba->pwr_info.gear_rx = UFS_PWM_G1;
	hba->pwr_info.gear_tx = UFS_PWM_G1;
	hba->pwr_info.lane_rx = 1;
	hba->pwr_info.lane_tx = 1;
	hba->pwr_info.pwr_rx = SLOWAUTO_MODE;
	hba->pwr_info.pwr_tx = SLOWAUTO_MODE;
	hba->pwr_info.hs_rate = 0;
}

Regards,
Subhash


-----Original Message-----
From: linux-scsi-owner@vger.kernel.org
[mailto:linux-scsi-owner@vger.kernel.org] On Behalf Of Akinobu Mita
Sent: Sunday, October 05, 2014 12:21 AM
To: linux-scsi@vger.kernel.org
Cc: Akinobu Mita; Akinobu Mita; Vinayak Holikatti; Santosh Y; Dolev Raviv;
Subhash Jadavani; Yaniv Gardi; Christoph Hellwig; James E.J. Bottomley
Subject: [PATCH -next] scsi: ufs: fix configuring power mode after UIC link
down

If the UFS Power management level 5 is chosen, the UIC link is down during
suspend.  And the power mode should be configured again during resume.
Unfortunately, it will not be configured because
ufshcd_change_power_mode() tries to avoid unnecessary power mode change if
the requested power mode and current power mode are same, but it can't
detect there has been UIC link down.

This fixes it by changing the type of hba->pwr_info to struct
ufs_pwr_mode_info in order to detect UIC link down in
ufshcd_change_power_mode(), and turn off hba->pwr_info.is_valid when UIC
link is down.

Signed-off-by: Akinobu Mita <mita@fixstars.com>
Cc: Vinayak Holikatti <vinholikatti@gmail.com>
Cc: Santosh Y <santoshsy@gmail.com>
Cc: Dolev Raviv <draviv@codeaurora.org>
Cc: Subhash Jadavani <subhashj@codeaurora.org>
Cc: Yaniv Gardi <ygardi@codeaurora.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: linux-scsi@vger.kernel.org
---
 drivers/scsi/ufs/ufshcd.c | 22 +++++++++++++---------
drivers/scsi/ufs/ufshcd.h |  2 +-
 2 files changed, 14 insertions(+), 10 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c index
497c38a..2d81578 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -2240,6 +2240,7 @@ static int ufshcd_uic_hibern8_exit(struct ufs_hba
*hba)
 	ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd);
 	if (ret) {
 		ufshcd_set_link_off(hba);
+		hba->pwr_info.is_valid = false;
 		ret = ufshcd_host_reset_and_restore(hba);
 	}
 
@@ -2315,13 +2316,14 @@ static int ufshcd_change_power_mode(struct ufs_hba
*hba,
 	int ret;
 
 	/* if already configured to the requested pwr_mode */
-	if (pwr_mode->gear_rx == hba->pwr_info.gear_rx &&
-	    pwr_mode->gear_tx == hba->pwr_info.gear_tx &&
-	    pwr_mode->lane_rx == hba->pwr_info.lane_rx &&
-	    pwr_mode->lane_tx == hba->pwr_info.lane_tx &&
-	    pwr_mode->pwr_rx == hba->pwr_info.pwr_rx &&
-	    pwr_mode->pwr_tx == hba->pwr_info.pwr_tx &&
-	    pwr_mode->hs_rate == hba->pwr_info.hs_rate) {
+	if (hba->pwr_info.is_valid &&
+	    pwr_mode->gear_rx == hba->pwr_info.info.gear_rx &&
+	    pwr_mode->gear_tx == hba->pwr_info.info.gear_tx &&
+	    pwr_mode->lane_rx == hba->pwr_info.info.lane_rx &&
+	    pwr_mode->lane_tx == hba->pwr_info.info.lane_tx &&
+	    pwr_mode->pwr_rx == hba->pwr_info.info.pwr_rx &&
+	    pwr_mode->pwr_tx == hba->pwr_info.info.pwr_tx &&
+	    pwr_mode->hs_rate == hba->pwr_info.info.hs_rate) {
 		dev_dbg(hba->dev, "%s: power already configured\n",
__func__);
 		return 0;
 	}
@@ -2368,8 +2370,8 @@ static int ufshcd_change_power_mode(struct ufs_hba
*hba,
 			hba->vops->pwr_change_notify(hba,
 				POST_CHANGE, NULL, pwr_mode);
 
-		memcpy(&hba->pwr_info, pwr_mode,
-			sizeof(struct ufs_pa_layer_attr));
+		hba->pwr_info.info = *pwr_mode;
+		hba->pwr_info.is_valid = true;
 	}
 
 	return ret;
@@ -4755,6 +4757,7 @@ static int ufshcd_link_state_transition(struct ufs_hba
*hba,
 		 * controller is reset
 		 */
 		ufshcd_set_link_off(hba);
+		hba->pwr_info.is_valid = false;
 	}
 
 out:
@@ -5463,6 +5466,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem
*mmio_base, unsigned int irq)
 	host->unique_id = host->host_no;
 	host->max_cmd_len = MAX_CDB_SIZE;
 
+	hba->pwr_info.is_valid = false;
 	hba->max_pwr_info.is_valid = false;
 
 	/* Initailize wait queue for task management */ diff --git
a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h index
58ecdff..b514f25 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -457,7 +457,7 @@ struct ufs_hba {
 
 	bool wlun_dev_clr_ua;
 
-	struct ufs_pa_layer_attr pwr_info;
+	struct ufs_pwr_mode_info pwr_info;
 	struct ufs_pwr_mode_info max_pwr_info;
 
 	struct ufs_clk_gating clk_gating;
--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the
body of a message to majordomo@vger.kernel.org More majordomo info at
http://vger.kernel.org/majordomo-info.html