From mboxrd@z Thu Jan 1 00:00:00 1970 From: James Bottomley Subject: Re: 2.6.0-test9-bk26 fails boot -- aic7890 detection Date: 22 Nov 2003 13:10:24 -0600 Sender: linux-scsi-owner@vger.kernel.org Message-ID: <1069528226.1664.5.camel@mulgrave> References: <200311221509.KAA07051@clem.clem-digital.net> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from nat9.steeleye.com ([65.114.3.137]:9733 "EHLO hancock.sc.steeleye.com") by vger.kernel.org with ESMTP id S262686AbTKVTK7 (ORCPT ); Sat, 22 Nov 2003 14:10:59 -0500 In-Reply-To: <200311221509.KAA07051@clem.clem-digital.net> List-Id: linux-scsi@vger.kernel.org To: Pete Clements Cc: Linux Kernel , SCSI Mailing List On Sat, 2003-11-22 at 09:09, Pete Clements wrote: > 2.6.0-test9-bk26 boot hangs after ide detection. Next detect normally > scsi AIC7XXX. Has been good for all prior test9-bk's. I'm assuming bk26 contains the latest set of SCSI diffs (they were merged on 21 Nov around 14:00 PST)? I've never successfully managed to get the aic7xxx driver to work on my parisc platform. However, both with and without the latest SCSI diffs the behaviour seems the same (it does print out the driver banner before failing to connect to the drives). I take it you aren't seeing this banner? James