From: Mario Giammarco <mgiammarco@virgilio.it>
To: Andrew Vasquez <praka@users.sourceforge.net>
Cc: Fabien Salvi <fabien@cri74.org>, linux-scsi@vger.kernel.org
Subject: Re: Status of qlogic tcp/ip (fc0) support
Date: Tue, 16 Dec 2003 00:16:43 +0100 [thread overview]
Message-ID: <1071530203.1365.8.camel@cala> (raw)
In-Reply-To: <20031215181944.GB1259@praka.local.home>
Il lun, 2003-12-15 alle 19:19, Andrew Vasquez ha scritto:
> Try the attached patch against 6.06.10 (available from the QLogic
> website).
>
Thank you very much! It almost works now!
BTW: I checked again qlogic website and I have not found it...
BTW2: About iSCSI. There are several software iscsi initiator and target
for linux (search with google and in sourceforge). I suggest ardis
target and cisco initiator. They are completely software so they run on
every tcp/ip based network. I have tested them on ethernet but they
should run also on fc0. But they are completely software based: they use
fibre channel only like a fast ethernet.
AND NOW the big problem:
I try to ping from qlogic card to mpt-fusion (lsi logic) card and
viceversa.
Hardware works (both cards see my fibre channel hard disks)
All packets are lost (destination host unreachable), route is ok.
On qlogic based host I see in dmesg output:
qla2x00_send_packet: Unable to determine loop id for destination.
qla2200ip: fc0 - Unable to send packet -- Bad error occured!!!
qla2x00_send_packet: Unable to determine loop id for destination.
qla2200ip: fc0 - Unable to send packet -- Bad error occured!!!
qla2x00_send_packet: Unable to determine loop id for destination.
qla2200ip: fc0 - Unable to send packet -- Bad error occured!!!
...
...
I suppose the bug is perhaps in mpt-fusion code because I triggered it
also with two lsi logic cards.
Please tell it to lsi logic developers also!
Thanks again for past and future help!
--
Mario Giammarco
prev parent reply other threads:[~2003-12-15 23:16 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-12-15 10:12 Status of qlogic tcp/ip (fc0) support Mario Giammarco
2003-12-15 11:38 ` Fabien Salvi
2003-12-15 11:56 ` Mario Giammarco
[not found] ` <3FDDC8FF.2090403@leosandbox.org>
2003-12-15 14:42 ` Fabien Salvi
2003-12-15 15:07 ` r35157anc3
2003-12-15 16:15 ` Fabien Salvi
2003-12-15 16:51 ` r35157anc3
2003-12-15 17:17 ` Fabien Salvi
[not found] ` <3FDDF067.4050805@leosandbox.org>
2003-12-15 17:36 ` Fabien Salvi
2003-12-15 17:57 ` r35157anc3
2003-12-15 18:24 ` Andrew Vasquez
2003-12-15 18:08 ` Mario Giammarco
2003-12-15 18:19 ` Andrew Vasquez
2003-12-15 23:16 ` Mario Giammarco [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1071530203.1365.8.camel@cala \
--to=mgiammarco@virgilio.it \
--cc=fabien@cri74.org \
--cc=linux-scsi@vger.kernel.org \
--cc=praka@users.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox