From: Nicola Ricciarelli <ricciare@aliceposta.it>
To: linux-scsi@vger.kernel.org
Subject: AHA1505 and 2.6.9 kernel
Date: Sat, 27 Nov 2004 09:23:54 +0100 [thread overview]
Message-ID: <1101543834.3587.63.camel@localhost.localdomain> (raw)
I've a very old SCSI controller, ADAPTEC AHA1505, I use it just to
control an Epson GT5500 scanner. I know .. very old controller ^_* but
sufficient for a scanner. I've selected hardware jumpers of the
controller so it has I/O= 0x140 and IRQ=9 (the only one free IRQ using
windows .. IRQ=11 it has a conflict with ethernet card). The scanner has
ID=2.
* Adding aha152x=0x140,9,2 in grub.conf nothing occurs
* Adding aha152x=0x140,9 in grub.conf nothing occurs
* Adding options aha152x aha152x=0x140,9,2 in /etc/modprobe.conf
and typing modprobe aha152x nothing occurs
* Adding options aha152x aha152x=0x140,9 in /etc/modprobe.conf
and typing modprobe aha152x nothing occurs
all times it says:
Nov 27 09:22:03 localhost kernel: aha152x: BIOS test: passed, 1
controller(s) configured
Nov 27 09:22:05 localhost kernel: aha152x: resetting bus...
Nov 27 09:22:05 localhost kernel: aha152x3: vital data: rev=1, io=0x140
(0x140/0x140), irq
=9, scsiid=7, reconnect=enabled, parity=enabled, synchronous=disabled,
delay=1000, extende
d translation=disabled
Nov 27 09:22:05 localhost kernel: aha152x3: trying software interrupt,
lost.
Nov 27 09:22:05 localhost kernel: aha152x3: irq 9 possibly wrong.
Please verify.
Nicola
PS: I was missing a couple of infos: I'm using Fedora Core 2 distro and
kernel 2.6.9-1.6_FC2 (but I'm going to recompile the 2.6.9 kernel +
patch 2.6.10-rc2).
--
Nicola Ricciarelli <ricciare@aliceposta.it>
reply other threads:[~2004-11-27 8:25 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1101543834.3587.63.camel@localhost.localdomain \
--to=ricciare@aliceposta.it \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox