From: James Bottomley <James.Bottomley@SteelEye.com>
To: "Grégoire Favre" <gregoire.favre@gmail.com>
Cc: dino@in.ibm.com, Andrew Morton <akpm@osdl.org>,
Linux Kernel <linux-kernel@vger.kernel.org>,
SCSI Mailing List <linux-scsi@vger.kernel.org>
Subject: Re: What breaks aic7xxx in post 2.6.12-rc2 ?
Date: Thu, 26 May 2005 09:19:23 -0400 [thread overview]
Message-ID: <1117113563.4967.17.camel@mulgrave> (raw)
In-Reply-To: <20050524153930.GA10911@gmail.com>
On Tue, 2005-05-24 at 17:39 +0200, Grégoire Favre wrote:
> target1:0:1: FAST-20 SCSI 20.0 MB/s ST (50 ns, offset 15)
>
> target1:0:1: Domain Validation detected failure, dropping back
>
> I hope it could be useful, now that my "toolchain" to fetch log is on,
> don't hesitate to ask me to try things...
Actually, did you capture anything more after this?
There's an indication from a previous file you sent:
Target 1 Negotiation Settings
User: 10.000MB/s transfers (10.000MHz, offset 127)
Goal: 10.000MB/s transfers (10.000MHz, offset 15)
Curr: 10.000MB/s transfers (10.000MHz, offset 15)
That for some reason the bus is tied to 10MHz (i.e. fast but not ultra).
The DV began at Ultra, but it should next drop down to FAST.
Also, when it finally boots up what does
/sys/class/spi_transport/target1:0:1/min_period
contain?
Thanks,
James
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2005-05-26 13:19 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20050516085832.GA9558@gmail.com>
[not found] ` <20050517071307.GA4794@in.ibm.com>
2005-05-17 7:29 ` What breaks aic7xxx in post 2.6.12-rc2 ? Andrew Morton
2005-05-17 8:34 ` Dinakar Guniguntala
2005-05-26 7:39 ` Andrew Morton
2005-05-26 10:37 ` K.R. Foley
2005-05-26 10:50 ` Dinakar Guniguntala
2005-05-26 12:59 ` James Bottomley
2005-05-17 14:34 ` James Bottomley
2005-05-17 15:57 ` Grégoire Favre
2005-05-17 16:38 ` James Bottomley
2005-05-17 16:52 ` Grégoire Favre
2005-05-17 18:16 ` James Bottomley
2005-05-17 17:08 ` Dinakar Guniguntala
2005-05-17 18:34 ` James Bottomley
2005-05-17 19:26 ` Grégoire Favre
2005-05-17 19:50 ` James Bottomley
2005-05-17 19:56 ` Grégoire Favre
2005-05-17 21:06 ` James Bottomley
2005-05-17 22:09 ` Grégoire Favre
2005-05-17 22:14 ` James Bottomley
2005-05-21 23:22 ` Grégoire Favre
2005-05-22 13:54 ` James Bottomley
2005-05-24 15:39 ` Grégoire Favre
2005-05-26 13:19 ` James Bottomley [this message]
2005-05-26 14:35 ` Grégoire Favre
2005-05-26 14:46 ` James Bottomley
2005-05-26 17:35 ` Grégoire Favre
2005-05-30 14:38 ` James Bottomley
2005-05-30 14:51 ` Michael Tokarev
2005-05-30 14:59 ` James Bottomley
2005-05-30 15:09 ` Grégoire Favre
2005-05-30 15:34 ` James Bottomley
2005-05-30 16:01 ` Grégoire Favre
2005-05-30 18:17 ` James Bottomley
2005-05-30 19:07 ` Grégoire Favre
2005-06-06 18:17 ` James Bottomley
2005-06-07 8:57 ` Grégoire Favre
2005-06-12 15:38 ` James Bottomley
2005-06-13 14:50 ` Grégoire Favre
2005-06-13 14:59 ` James Bottomley
2005-06-13 15:05 ` Christoph Hellwig
2005-06-13 15:17 ` Grégoire Favre
2005-06-13 18:37 ` Gr�goire Favre
2005-06-13 20:50 ` James Bottomley
2005-06-13 21:33 ` Gregoire Favre
2005-06-13 21:46 ` James Bottomley
2005-06-13 21:59 ` Gregoire Favre
2005-06-13 22:04 ` James Bottomley
2005-06-13 22:25 ` Gregoire Favre
2005-06-14 2:20 ` James Bottomley
2005-06-14 9:28 ` What breaks aic7xxx in post 2.6.12-rc2 ? (fixed in 2.6.12-rc6 with patches) Gregoire Favre
2005-06-13 21:42 ` What breaks aic7xxx in post 2.6.12-rc2 ? Frank van Maarseveen
2005-06-13 22:59 ` James Bottomley
2005-06-14 21:42 ` Frank van Maarseveen
2005-06-15 12:02 ` Frank van Maarseveen
2005-06-15 14:14 ` James Bottomley
2005-06-15 20:09 ` Frank van Maarseveen
2005-06-15 20:15 ` James Bottomley
2005-06-15 20:15 ` James Bottomley
2005-06-15 20:49 ` Frank van Maarseveen
2005-05-18 9:07 ` Dinakar Guniguntala
2005-05-18 14:12 ` James Bottomley
2005-05-18 14:40 ` Dinakar Guniguntala
2005-05-19 3:07 ` K.R. Foley
2005-05-19 4:23 ` James Bottomley
2005-05-19 9:51 ` Dinakar Guniguntala
2005-05-19 23:56 ` James Bottomley
2005-05-20 1:05 ` K.R. Foley
2005-05-20 1:17 ` James Bottomley
2005-05-20 1:32 ` K.R. Foley
2005-05-20 1:33 ` James Bottomley
2005-05-20 1:40 ` James Bottomley
2005-05-20 1:54 ` K.R. Foley
2005-05-20 2:30 ` James Bottomley
2005-05-20 3:06 ` K.R. Foley
2005-05-20 10:09 ` Dinakar Guniguntala
2005-05-19 11:27 ` K.R. Foley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1117113563.4967.17.camel@mulgrave \
--to=james.bottomley@steeleye.com \
--cc=akpm@osdl.org \
--cc=dino@in.ibm.com \
--cc=gregoire.favre@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox