From: James Bottomley <jejb@steeleye.com>
To: bugme-daemon@bugzilla.kernel.org
Cc: Zajsoft2@Zajsoft.NET, SCSI Mailing List <linux-scsi@vger.kernel.org>
Subject: Re: [Bug 5808] aic7xxx - half speed/frequency
Date: Mon, 02 Jan 2006 10:28:29 -0600 [thread overview]
Message-ID: <1136219309.3531.36.camel@mulgrave> (raw)
In-Reply-To: <200601020041.k020fes2021946@fire-2.osdl.org>
On Sun, 2006-01-01 at 16:41 -0800, bugme-daemon@bugzilla.kernel.org
wrote:
> Most recent kernel where this bug did not occur: 2.6.12.6
> Distribution: Debian 3.1r1 - Sarge
Do you have the dmesg showing the domain validation commands for these, please?
And also could you tell me what's in
/sys/spi_transport/target<...>/min_period
Thanks,
James
> Hardware Environment: Dell PowerEdge 4200/300
>
> Software Environment:
> ver_linux:
> Linux GW 2.6.13 #1 SMP Sun Jan 1 21:13:01 CET 2006 i686 GNU/Linux
>
> Gnu C 3.3.5
> Gnu make 3.80
> binutils 2.15
> util-linux 2.12p
> mount 2.12p
> module-init-tools 3.2-pre1
> e2fsprogs 1.37
> jfsutils 1.1.7
> xfsprogs 2.6.20
> Linux C Library 2.3.2
> Dynamic linker (ldd) 2.3.2
> Procps 3.2.1
> Net-tools 1.60
> Console-tools 0.2.3
> Sh-utils 5.2.1
> Modules Loaded
>
>
> proc/cpuinfo:
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 6
> model : 3
> model name : Pentium II (Klamath)
> stepping : 4
> cpu MHz : 299.170
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov mmx
> bogomips : 599.32
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 6
> model : 3
> model name : Pentium II (Klamath)
> stepping : 3
> cpu MHz : 299.170
> cache size : 512 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca
> cmov mmx
> bogomips : 598.36
>
>
> /proc/modules:
>
>
> /proc/ioports:
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-006f : keyboard
> 0070-0077 : rtc
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0330-0333 : i2c-pca-isa
> 03c0-03df : vga+
> 0400-0407 : pnp 00:0f
> 040a-040c : pnp 00:0f
> 0410-043f : pnp 00:0f
> 0461-0462 : pnp 00:0f
> 0464-0465 : pnp 00:0f
> 0481-048b : pnp 00:0f
> 04c6-04c6 : pnp 00:0f
> 0c80-0c83 : Dell System PowerEdge 4200
> 0cf8-0cff : PCI conf1
> e000-efff : PCI Bus #01
> e000-e0ff : 0000:01:0d.0
> e000-e0ff : 8139too
> e400-e4ff : 0000:01:0b.0
> e800-e8ff : 0000:01:0a.0
> f4a0-f4bf : 0000:00:13.0
> f4a0-f4bf : ne2k-pci
> f800-f8ff : 0000:00:14.0
>
>
> /proc/iomem:
> 00000000-0009fbff : System RAM
> 0009fc00-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000c8000-000cc7ff : Adapter ROM
> 000f0000-000fffff : System ROM
> 00100000-0fffffff : System RAM
> 00100000-0049816c : Kernel code
> 0049816d-005b31c7 : Kernel data
> 10000000-100fffff : PCI Bus #01
> 10000000-1000ffff : 0000:01:0a.0
> 10100000-1010ffff : 0000:00:14.0
> 10110000-10113fff : 0000:00:13.0
> fc000000-fcffffff : 0000:00:14.0
> fde00000-fdffffff : PCI Bus #01
> fdefe000-fdefefff : 0000:01:0a.0
> fdefe000-fdefefff : aic7xxx
> fdffe000-fdffefff : 0000:01:0b.0
> fdffe000-fdffefff : aic7xxx
> fdfff800-fdfff8ff : 0000:01:0d.0
> fdfff800-fdfff8ff : 8139too
> fec00000-fec00fff : reserved
> fee00000-fee00fff : reserved
> fff80000-ffffffff : reserved
>
>
> lspci -vvv:
> 0000:00:00.0 Host bridge: Intel Corp. 440FX - 82441FX PMC [Natoma] (rev 02)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 32
>
> 0000:00:0d.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 02)
> (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 255, Cache Line Size: 0x08 (32 bytes)
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: fde00000-fdffffff
> Prefetchable memory behind bridge: 0000000010000000-0000000010000000
> BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
> 0000:00:0f.0 Non-VGA unclassified device: Intel Corp. 82375EB/SB PCI to EISA
> Bridge (rev 15)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 248
>
> 0000:00:13.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin A routed to IRQ 10
> Region 0: I/O ports at f4a0 [size=32]
> Expansion ROM at 10110000 [disabled] [size=16K]
>
> 0000:00:14.0 VGA compatible controller: ATI Technologies Inc 264VT [Mach64 VT]
> (rev 40) (prog-if 00 [VGA])
> Subsystem: ATI Technologies Inc Mach64VT Reference
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop+ ParErr-
> Stepping+ SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Region 0: Memory at fc000000 (32-bit, prefetchable) [size=16M]
> Region 1: I/O ports at f800 [size=256]
> Expansion ROM at 10100000 [disabled] [size=64K]
>
> 0000:01:0a.0 SCSI storage controller: Adaptec AIC-7880U
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (2000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes)
> Interrupt: pin A routed to IRQ 15
> Region 0: I/O ports at e800 [disabled] [size=256]
> Region 1: Memory at fdefe000 (32-bit, non-prefetchable) [size=4K]
> Expansion ROM at 10000000 [disabled] [size=64K]
>
> 0000:01:0b.0 SCSI storage controller: Adaptec AIC-7860 (rev 01)
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (1000ns min, 1000ns max), Cache Line Size: 0x08 (32 bytes)
> Interrupt: pin A routed to IRQ 15
> Region 0: I/O ports at e400 [disabled] [size=256]
> Region 1: Memory at fdffe000 (32-bit, non-prefetchable) [size=4K]
>
> 0000:01:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-
> 8139/8139C/8139C+ (rev 10)
> Subsystem: Realtek Semiconductor Co., Ltd. RT8139
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (8000ns min, 16000ns max)
> Interrupt: pin A routed to IRQ 9
> Region 0: I/O ports at e000 [size=256]
> Region 1: Memory at fdfff800 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-
> ,D1+,D2+,D3hot+,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>
> /proc/scsi/scsi:
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: SEAGATE Model: ST34573LC Rev: 5702
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 01 Lun: 00
> Vendor: SEAGATE Model: ST19171W Rev: 2219
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 02 Lun: 00
> Vendor: SEAGATE Model: ST19171W Rev: 2219
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 03 Lun: 00
> Vendor: SEAGATE Model: ST19171W Rev: 2224
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 04 Lun: 00
> Vendor: SEAGATE Model: ST39173LC Rev: 5702
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 05 Lun: 00
> Vendor: SEAGATE Model: ST19171W Rev: 2224
> Type: Direct-Access ANSI SCSI revision: 02
> Host: scsi0 Channel: 00 Id: 06 Lun: 00
> Vendor: DELL Model: 6UW BACKPLANE Rev: 7
> Type: Processor ANSI SCSI revision: 02
> Host: scsi1 Channel: 00 Id: 05 Lun: 00
> Vendor: NEC Model: CD-ROM DRIVE:464 Rev: 1.05
> Type: CD-ROM
>
>
> /proc/scsi/aic7xxx/0:
> Adaptec AIC7xxx driver version: 6.2.36
> Adaptec aic7880 Ultra SCSI adapter
> aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
> Allocated SCBs: 36, SG List Length: 128
>
> Serial EEPROM:
> 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338
> 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338
> 0x18b6 0x005e 0x2807 0x0010 0xff00 0xffff 0xffff 0xffff
> 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x00ff 0x74a1
>
> Target 0 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> Curr: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> Channel A Target 0 Lun 0 Settings
> Commands Queued 1283
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 1 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> Curr: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> Channel A Target 1 Lun 0 Settings
> Commands Queued 46
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 2 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> Curr: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> Channel A Target 2 Lun 0 Settings
> Commands Queued 37
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 3 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> Curr: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> Channel A Target 3 Lun 0 Settings
> Commands Queued 36
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 4 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> Curr: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> Channel A Target 4 Lun 0 Settings
> Commands Queued 36
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 5 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> Curr: 20.000MB/s transfers (10.000MHz, offset 8, 16bit)
> Channel A Target 5 Lun 0 Settings
> Commands Queued 45
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 6 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 3.300MB/s transfers
> Curr: 3.300MB/s transfers
> Channel A Target 6 Lun 0 Settings
> Commands Queued 6
> Commands Active 0
> Command Openings 1
> Max Tagged Openings 0
> Device Queue Frozen Count 0
> Target 7 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 8 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 9 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 10 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 11 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 12 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 13 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 14 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 15 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
>
>
> /proc/scsi/aic7xxx/1:
> Adaptec AIC7xxx driver version: 6.2.36
> Adaptec aic7860 Ultra SCSI adapter
> aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
> Allocated SCBs: 4, SG List Length: 128
>
> Serial EEPROM:
> 0x0318 0x0318 0x0318 0x0318 0x0318 0x0318 0x0318 0x0318
> 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338
> 0x18b5 0x005e 0x2807 0x5008 0xff00 0xffff 0xffff 0xffff
> 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x00ff 0xc398
>
> Target 0 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Target 1 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Target 2 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Target 3 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Target 4 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Target 5 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Goal: 10.000MB/s transfers (10.000MHz, offset 15)
> Curr: 10.000MB/s transfers (10.000MHz, offset 15)
> Channel A Target 5 Lun 0 Settings
> Commands Queued 16
> Commands Active 0
> Command Openings 1
> Max Tagged Openings 0
> Device Queue Frozen Count 0
> Target 6 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Target 7 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
>
>
> /proc/scsi/aic7xxx/0 - from kernel 2.6.12.6:
>
> Adaptec AIC7xxx driver version: 6.2.36
> Adaptec aic7880 Ultra SCSI adapter
> aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
> Allocated SCBs: 8, SG List Length: 128
>
> Serial EEPROM:
> 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338
> 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338
> 0x18b6 0x005e 0x2807 0x0010 0xff00 0xffff 0xffff 0xffff
> 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x00ff 0x74a1
>
> Target 0 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
> Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
> Channel A Target 0 Lun 0 Settings
> Commands Queued 1459
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 1 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
> Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
> Channel A Target 1 Lun 0 Settings
> Commands Queued 48
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 2 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
> Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
> Channel A Target 2 Lun 0 Settings
> Commands Queued 38
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 3 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
> Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
> Channel A Target 3 Lun 0 Settings
> Commands Queued 37
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 4 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
> Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
> Channel A Target 4 Lun 0 Settings
> Commands Queued 37
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 5 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
> Curr: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
> Channel A Target 5 Lun 0 Settings
> Commands Queued 47
> Commands Active 0
> Command Openings 32
> Max Tagged Openings 32
> Device Queue Frozen Count 0
> Target 6 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Goal: 3.300MB/s transfers
> Curr: 3.300MB/s transfers
> Channel A Target 6 Lun 0 Settings
> Commands Queued 6
> Commands Active 0
> Command Openings 1
> Max Tagged Openings 0
> Device Queue Frozen Count 0
> Target 7 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 8 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 9 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 10 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 11 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 12 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 13 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 14 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
> Target 15 Negotiation Settings
> User: 40.000MB/s transfers (20.000MHz, offset 127, 16bit)
>
>
> /proc/scsi/aic7xxx/1 - from kernel 2.6.12.6:
> Adaptec AIC7xxx driver version: 6.2.36
> Adaptec aic7860 Ultra SCSI adapter
> aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
> Allocated SCBs: 4, SG List Length: 128
>
> Serial EEPROM:
> 0x0318 0x0318 0x0318 0x0318 0x0318 0x0318 0x0318 0x0318
> 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338 0x0338
> 0x18b5 0x005e 0x2807 0x5008 0xff00 0xffff 0xffff 0xffff
> 0xffff 0xffff 0xffff 0xffff 0xffff 0xffff 0x00ff 0xc398
>
> Target 0 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Target 1 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Target 2 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Target 3 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Target 4 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Target 5 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Goal: 20.000MB/s transfers (20.000MHz, offset 15)
> Curr: 20.000MB/s transfers (20.000MHz, offset 15)
> Channel A Target 5 Lun 0 Settings
> Commands Queued 16
> Commands Active 0
> Command Openings 1
> Max Tagged Openings 0
> Device Queue Frozen Count 0
> Target 6 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
> Target 7 Negotiation Settings
> User: 20.000MB/s transfers (20.000MHz, offset 127)
>
> Problem Description:
> If use kernel 2.6.13 or newer, all SCSI discs/cdrom work only on half
> speed/frequency.
>
> Steps to reproduce:
> Only boot... cat /proc/scsi/aic7xxx/0
next parent reply other threads:[~2006-01-02 16:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <200601020041.k020fes2021946@fire-2.osdl.org>
2006-01-02 16:28 ` James Bottomley [this message]
[not found] ` <43B9C5A8.5090800@Zajsoft.NET>
2006-01-04 17:57 ` [Bug 5808] aic7xxx - half speed/frequency James Bottomley
[not found] <200601041758.k04Hw8Sf015281@fire-2.osdl.org>
2006-01-05 14:36 ` Miroslav Zajíc
2006-01-06 16:43 ` James Bottomley
2006-01-06 19:45 ` Miroslav Zajíc
2006-01-06 21:46 ` James Bottomley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1136219309.3531.36.camel@mulgrave \
--to=jejb@steeleye.com \
--cc=James.Bottomley@steeleye.com \
--cc=Zajsoft2@Zajsoft.NET \
--cc=bugme-daemon@bugzilla.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox