From: James Bottomley <James.Bottomley@SteelEye.com>
To: Linus Torvalds <torvalds@osdl.org>, Andrew Morton <akpm@osdl.org>
Cc: Linux Kernel <linux-kernel@vger.kernel.org>,
SCSI Mailing List <linux-scsi@vger.kernel.org>
Subject: [GIT PATCH] SCSI bug fixes for 2.6.16-rc1
Date: Tue, 31 Jan 2006 14:56:56 -0600 [thread overview]
Message-ID: <1138741016.3307.20.camel@mulgrave> (raw)
These are mainly driver bug fixes and updates.
The patch is available here:
master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
The short changelog is:
Andrew Vasquez:
o qla2xxx: Drop legacy 'bypass lun scan for tape device' code
o qla2xxx: Correct issue where the rport's upcall was not being made after relogin
o qla2xxx: Correct synchronization issues during rport addition/deletion
Brian King:
o Prevent scsi_execute_async from guessing cdb length
Christoph Hellwig:
o mptsas: don't complain on bogus slave_alloc calls
o fusion: add MSI support
o fusion: setting timeouts in eh threads appropiatley for fc/sas/spi
Dave Boutcher:
o ibmvscsi: handle re-enable firmware message
Eric Moore:
o fusion: add message sanity check
o fusion: unloading the driver - only set asyn narrow for configured devices
o fusion: unloading the driver results in panic - fix
o fusion: add task managment response code info
o fusion: overrun tape fix
o fusion: add verbose messages for RAID actions
o fusion: increase reply frame size from 0x40 to 0x50 bytes
o fusion: mptsas, increase discovery timout to 300 seconds
o fusion: spi bus reset when driver loads
o fusion: bump version
o fusion: move sas persistent event handling over to the mptsas module
o fusion: target reset when drive is being removed
o fusion: add support for raid hot add/del support
o scsi_transport_sas.c: display port identifier
Guennadi Liakhovetski:
o dc395x: "fix" virt_addr calculation on AUTO_REQSENSE
Hannes Reinecke:
o aic79xx: Fix timer handling
o aic7xxx: update documentation
o aic79xx: SLOWCRC fix
o aic79xx: sequencer fixes
o aic7xxx: Update aicasm
Jack Hammer:
o ServeRAID: prevent seeing DADSI devices
o ips soft lockup during reset/initialization
James Bottomley:
o fusion: fix compile
Jes Sorensen:
o qla1280: remove < 2.6.0 support
Michael Reed:
o fusion: FC rport code fixes
Sumant Patro:
o megaraid_sas: new template defined to represent each type of controllers
o megaraid_sas: cleanup queue command path
And the diffstat:
Documentation/scsi/ChangeLog.megaraid_sas | 24
Documentation/scsi/aic79xx.txt | 93 --
Documentation/scsi/aic7xxx.txt | 86 --
drivers/message/fusion/Makefile | 2
drivers/message/fusion/mptbase.c | 184 ++++
drivers/message/fusion/mptbase.h | 16
drivers/message/fusion/mptfc.c | 203 +++--
drivers/message/fusion/mptsas.c | 241 +++++-
drivers/message/fusion/mptscsih.c | 116 ++-
drivers/message/fusion/mptscsih.h | 1
drivers/message/fusion/mptspi.c | 10
drivers/scsi/aic7xxx/Kconfig.aic79xx | 4
drivers/scsi/aic7xxx/aic79xx.h | 3
drivers/scsi/aic7xxx/aic79xx.reg | 29
drivers/scsi/aic7xxx/aic79xx.seq | 143 +++
drivers/scsi/aic7xxx/aic79xx_core.c | 286 +++++--
drivers/scsi/aic7xxx/aic79xx_inline.h | 7
drivers/scsi/aic7xxx/aic79xx_osm.c | 43 -
drivers/scsi/aic7xxx/aic79xx_osm.h | 10
drivers/scsi/aic7xxx/aic79xx_osm_pci.c | 17
drivers/scsi/aic7xxx/aic79xx_pci.c | 11
drivers/scsi/aic7xxx/aic79xx_reg.h_shipped | 27
drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped | 21
drivers/scsi/aic7xxx/aic79xx_seq.h_shipped | 881 +++++++++++------------
drivers/scsi/aic7xxx/aicasm/aicasm.c | 23
drivers/scsi/aic7xxx/aicasm/aicasm_gram.y | 19
drivers/scsi/aic7xxx/aicasm/aicasm_insformat.h | 88 ++
drivers/scsi/aic7xxx/aicasm/aicasm_scan.l | 27
drivers/scsi/dc395x.c | 6
drivers/scsi/ibmvscsi/ibmvscsi.c | 67 -
drivers/scsi/ibmvscsi/ibmvscsi.h | 3
drivers/scsi/ibmvscsi/iseries_vscsi.c | 13
drivers/scsi/ibmvscsi/rpa_vscsi.c | 22
drivers/scsi/ips.c | 54 -
drivers/scsi/megaraid/megaraid_sas.c | 291 +++----
drivers/scsi/megaraid/megaraid_sas.h | 24
drivers/scsi/qla1280.c | 311 --------
drivers/scsi/qla2xxx/qla_def.h | 4
drivers/scsi/qla2xxx/qla_gbl.h | 6
drivers/scsi/qla2xxx/qla_init.c | 83 +-
drivers/scsi/qla2xxx/qla_isr.c | 16
drivers/scsi/qla2xxx/qla_os.c | 55 +
drivers/scsi/scsi_error.c | 2
drivers/scsi/scsi_lib.c | 5
drivers/scsi/scsi_transport_sas.c | 6
drivers/scsi/sg.c | 2
drivers/scsi/st.c | 2
include/scsi/scsi_device.h | 2
48 files changed, 2161 insertions(+), 1428 deletions(-)
James
next reply other threads:[~2006-01-31 20:56 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-31 20:56 James Bottomley [this message]
2006-01-31 21:13 ` [GIT PATCH] SCSI bug fixes for 2.6.16-rc1 Brian King
2006-01-31 23:09 ` James Bottomley
2006-01-31 23:18 ` Brian King
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1138741016.3307.20.camel@mulgrave \
--to=james.bottomley@steeleye.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox