From: James Smart <James.Smart@Emulex.Com>
To: linux-scsi@vger.kernel.org
Subject: [PATCH 2/15] lpfc 8.1.7 : Standardize the driver on a single define for the maximum supported targets
Date: Thu, 06 Jul 2006 15:49:25 -0400 [thread overview]
Message-ID: <1152215365.23158.19.camel@localhost.localdomain> (raw)
Standardize the driver on a single define for the maximum supported targets.
Signed-off-by: James Smart <James.Smart@emulex.com>
diff -upNr a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
--- a/drivers/scsi/lpfc/lpfc.h 2006-07-05 14:49:02.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc.h 2006-07-06 14:36:09.000000000 -0400
@@ -21,10 +21,12 @@
struct lpfc_sli2_slim;
-#define LPFC_MAX_TARGET 256 /* max targets supported */
-#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els req */
-#define LPFC_MAX_NS_RETRY 3 /* max NameServer retries */
+#define LPFC_MAX_TARGET 256 /* max number of targets supported */
+#define LPFC_MAX_DISC_THREADS 64 /* max outstanding discovery els
+ requests */
+#define LPFC_MAX_NS_RETRY 3 /* Number of retry attempts to contact
+ the NameServer before giving up. */
#define LPFC_DFT_HBA_Q_DEPTH 2048 /* max cmds per hba */
#define LPFC_LC_HBA_Q_DEPTH 1024 /* max cmds per low cost hba */
#define LPFC_LP101_HBA_Q_DEPTH 128 /* max cmds per low cost hba */
@@ -41,7 +43,6 @@ struct lpfc_sli2_slim;
(( (u64)(high)<<16 ) << 16)|( (u64)(low))))
/* Provide maximum configuration definitions. */
#define LPFC_DRVR_TIMEOUT 16 /* driver iocb timeout value in sec */
-#define MAX_FCP_TARGET 256 /* max num of FCP targets supported */
#define FC_MAX_ADPTMSG 64
#define MAX_HBAEVT 32
diff -upNr a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c 2006-07-05 14:49:02.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c 2006-07-06 14:36:09.000000000 -0400
@@ -1084,7 +1084,7 @@ lpfc_register_remote_port(struct lpfc_hb
fc_remote_port_rolechg(rport, rport_ids.roles);
if ((rport->scsi_target_id != -1) &&
- (rport->scsi_target_id < MAX_FCP_TARGET)) {
+ (rport->scsi_target_id < LPFC_MAX_TARGET)) {
ndlp->nlp_sid = rport->scsi_target_id;
}
@@ -1313,7 +1313,7 @@ lpfc_nlp_list(struct lpfc_hba * phba, st
if ((rport_add == mapped) &&
((!nlp->rport) ||
(nlp->rport->scsi_target_id == -1) ||
- (nlp->rport->scsi_target_id >= MAX_FCP_TARGET))) {
+ (nlp->rport->scsi_target_id >= LPFC_MAX_TARGET))) {
nlp->nlp_state = NLP_STE_UNMAPPED_NODE;
spin_lock_irq(phba->host->host_lock);
nlp->nlp_flag |= NLP_TGT_NO_SCSIID;
diff -upNr a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
--- a/drivers/scsi/lpfc/lpfc_scsi.c 2006-07-05 14:49:02.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_scsi.c 2006-07-06 14:36:09.000000000 -0400
@@ -1078,7 +1078,7 @@ lpfc_reset_bus_handler(struct scsi_cmnd
* targets known to the driver. Should any target reset
* fail, this routine returns failure to the midlayer.
*/
- for (i = 0; i < MAX_FCP_TARGET; i++) {
+ for (i = 0; i < LPFC_MAX_TARGET; i++) {
/* Search the mapped list for this target ID */
match = 0;
list_for_each_entry(ndlp, &phba->fc_nlpmap_list, nlp_listp) {
reply other threads:[~2006-07-06 19:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1152215365.23158.19.camel@localhost.localdomain \
--to=james.smart@emulex.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox