From: Giuseppe Sacco <giuseppe.sacco@lixper.it>
To: G Shyam Sundar <callshyam@gmail.com>
Cc: linux-scsi@vger.kernel.org
Subject: Re: question about qlogic QLA2312
Date: Fri, 15 Sep 2006 16:12:17 +0200 [thread overview]
Message-ID: <1158329537.8103.57.camel@scarafaggio> (raw)
In-Reply-To: <19dce7c30609150656s4397bbfeyba53586cb2105ab7@mail.gmail.com>
Il giorno ven, 15/09/2006 alle 19.26 +0530, G Shyam Sundar ha scritto:
> Which version of the driver are you using ?
> Also, what is the version of the firmware ? You can get the version of
> fimware by
> # grep FW_VERSION_STRING in the source directory.
>
> It will be helpful if you could recompile the driver with
> QL_DEBUG_LEVEL_2 enabled (qla_dbg.h) and recreate the issue.
I used two versions of the driver. The first one is shipped with the
standard kernel from suse: 8.01.04-k (from modinfo). the second one is
from the latest driver I could download from sourceforge.net (project
linux-qla2xxx) and is version 8.01.06b2 (from modinfo).
The new version emit some more information:
qla2xxx_conf: module not supported by Novell, setting U taint flag.
qla2xxx: module not supported by Novell, setting U taint flag.
QLogic Fibre Channel HBA Driver
qla2300: module not supported by Novell, setting U taint flag.
ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 22 (level, low) -> IRQ 177
qla2300 0000:03:02.0: Found an ISP2312, irq 177, iobase
0xffffc20000f70000
qla2300 0000:03:02.0: Configuring PCI space...
qla2300 0000:03:02.0: Configure NVRAM parameters...
qla2300 0000:03:02.0: Verifying loaded RISC code...
qla2300 0000:03:02.0: Mailbox command timeout occured. Scheduling ISP
abort.
qla2300 0000:03:02.0: [ERROR] Failed to load segment 0 of firmware
Mailbox registers:
scsi(7): mbox 0 0x4000
scsi(7): mbox 1 0xaaaa
scsi(7): mbox 2 0x5555
scsi(7): mbox 3 0xaa55
scsi(7): mbox 4 0x55aa
scsi(7): mbox 5 0xa5a5
qla2300 0000:03:02.0: Failed to initialize adapter
qla2300: probe of 0000:03:02.0 failed with error -1
About FW_VERSION_STRING:
lnx01:/usr/src/linux/drivers/scsi/qla2xxx # grep FW_V *
ql2100_fw.c:#define FW_VERSION_STRING "1.19.25"
ql2200_fw.c:#define FW_VERSION_STRING "2.02.08"
ql2300_fw.c:#define FW_VERSION_STRING "3.03.18"
ql2322_fw.c:#define FW_VERSION_STRING "3.03.18"
ql2400_fw.c:#define FW_VERSION_STRING "4.00.16"
ql6312_fw.c:#define FW_VERSION_STRING "3.03.18"
lnx01:/usr/src/linux/drivers/scsi/qla2xxx #
Thanks,
Giuseppe
next prev parent reply other threads:[~2006-09-15 14:12 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-09-15 8:00 question about qlogic QLA2312 Giuseppe Sacco
2006-09-15 13:56 ` G Shyam Sundar
2006-09-15 14:12 ` Giuseppe Sacco [this message]
2006-09-15 15:54 ` Giuseppe Sacco
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1158329537.8103.57.camel@scarafaggio \
--to=giuseppe.sacco@lixper.it \
--cc=callshyam@gmail.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox