From: Sean Bruno <sean.bruno@dsl-only.net>
To: linux-scsi@vger.kernel.org
Subject: Re: Adaptec 29320 [aic79xx] fails on power cycle of LUN
Date: Thu, 19 Oct 2006 05:25:30 -0700 [thread overview]
Message-ID: <1161260730.3204.36.camel@home-desk> (raw)
In-Reply-To: <1161237121.15090.9.camel@max>
On Thu, 2006-10-19 at 01:52 -0400, Mike Christie wrote:
> On Wed, 2006-10-18 at 15:32 -0700, Sean Bruno wrote:
> > On Wed, 2006-10-18 at 15:24 -0700, Sean Bruno wrote:
> > > I have had a tough time tracking this one down, however I can say for
> > > certain that the 29320 is really having trouble if a LUN is power
> > > cycled.
> > >
> > > I don't have access to a BUS analyzer right now, but here is my
> > > regression.
> > >
> > > 1. Hook an external SCSI array/disk to a 29320.
> > > 2. Power up SCSI array/disk
> > > 3. Power up PC with 29320.
> > > 4. When PC has booted, login and test device by creating a file
> > > system, eg. mkfs /dev/sda (or whatever disk the array is called on
> > > ur machine).
> > > 5. Power cycle array/disk
> > > 6. Retest device with another 'mkfs /dev/sda' ... panic/crash/lock-up
> > > ensues.
> > >
> > >
> > >
> > > This did not happen in 2.6.15.7 but did appear in 2.6.16 and higher.
> > >
> Does this only occur with sg or is that the only way you got a trace? In
> the original bug report you mentioned it occurring with mkfs, but the
> bug oops is from a sg request. Is tdg_2 run while the mkfs is running?
Snippets from 'dmesg' during step 6:
scsi0: Someone reset channel A
sd 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x28 0x0 0x0 0x0
0x0 0x80 0x0 0x0 0x80 0x0
Infinite interrupt loop, INTSTAT = 8scsi0: At time of recovery, card was
paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x13 Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x4] SELID[0x40] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]
SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x2] SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x9]
KERNEL_QFREEZE_COUNT[0x9] MK_MESSAGE_SCB[0x0] MK_MESSAGE_SCSIID[0x47]
SSTAT0[0x0] SSTAT1[0x28] SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0]
LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
qinstart = 11319 qinfifonext = 11321
QINFIFO: 0x0 0x2
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47]
0 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47]
Total 2
Kernel Free SCB list: 1 3
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi0: FIFO1 Free, LONGJMP == 0x81f1, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff57
CDB 2a 0 0 80 9 e0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:4:0: Cmd aborted from QINFIFO
sd 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0
0x0 0x0
Infinite interrupt loop, INTSTAT = 8scsi0: At time of recovery, card was
paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x13 Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x4] SELID[0x40] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]
SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x2] SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x9]
KERNEL_QFREEZE_COUNT[0x9] MK_MESSAGE_SCB[0x0] MK_MESSAGE_SCSIID[0x47]
SSTAT0[0x0] SSTAT1[0x28] SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0]
LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
qinstart = 11319 qinfifonext = 11321
QINFIFO: 0x2 0x0
WAITING_TID_QUEUES:
Pending list:
0 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47]
2 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47]
Total 2
Kernel Free SCB list: 1 3
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi0: FIFO1 Free, LONGJMP == 0x81f1, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff57
CDB 2a 0 0 80 9 e0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:4:0: Cmd aborted from QINFIFO
sd 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x28 0x0 0x0 0x0
0x0 0x0 0x0 0x0 0x80 0x0
Infinite interrupt loop, INTSTAT = 8scsi0: At time of recovery, card was
paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x13 Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x4] SELID[0x40] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]
SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x2] SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x9]
KERNEL_QFREEZE_COUNT[0x9] MK_MESSAGE_SCB[0x0] MK_MESSAGE_SCSIID[0x47]
SSTAT0[0x0] SSTAT1[0x28] SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0]
LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
qinstart = 11319 qinfifonext = 11320
QINFIFO: 0x2
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47]
Total 1
Kernel Free SCB list: 0 1 3
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi0: FIFO1 Free, LONGJMP == 0x81f1, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff57
CDB 2a 0 0 80 9 e0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:4:0: Cmd aborted from QINFIFO
sd 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0
0x0 0x0
Infinite interrupt loop, INTSTAT = 8scsi0: At time of recovery, card was
paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x13 Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x4] SELID[0x40] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]
SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x2] SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x9]
KERNEL_QFREEZE_COUNT[0x9] MK_MESSAGE_SCB[0x0] MK_MESSAGE_SCSIID[0x47]
SSTAT0[0x0] SSTAT1[0x28] SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0]
LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
qinstart = 11319 qinfifonext = 11320
QINFIFO: 0x2
WAITING_TID_QUEUES:
Pending list:
2 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47]
Total 1
Kernel Free SCB list: 0 1 3
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi0: FIFO1 Free, LONGJMP == 0x81f1, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff57
CDB 2a 0 0 80 9 e0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:4:0: Cmd aborted from QINFIFO
sd 0:0:4:0: Attempting to queue a TARGET RESET message:CDB: 0x28 0x0 0x0
0x0 0x0 0x80 0x0 0x0 0x80 0x0
scsi0: Device reset code sleeping
scsi0: Device reset timer expired (active 1)
scsi0: Device reset returning 0x2003
scsi0: bus reset still active
sd 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0
0x0 0x0
Infinite interrupt loop, INTSTAT = 8scsi0: At time of recovery, card was
paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x13 Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x4] SELID[0x40] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]
SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x2] SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x9]
KERNEL_QFREEZE_COUNT[0x9] MK_MESSAGE_SCB[0x0] MK_MESSAGE_SCSIID[0x47]
SSTAT0[0x0] SSTAT1[0x28] SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0]
LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
qinstart = 11319 qinfifonext = 11321
QINFIFO: 0x2 0x0
WAITING_TID_QUEUES:
Pending list:
0 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47]
2 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47]
Total 2
Kernel Free SCB list: 1 3
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi0: FIFO1 Free, LONGJMP == 0x81f1, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff57
CDB 2a 0 0 80 9 e0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:4:0: Cmd aborted from QINFIFO
sd 0:0:4:0: Attempting to queue an ABORT message:CDB: 0x0 0x0 0x0 0x0
0x0 0x0
Infinite interrupt loop, INTSTAT = 8scsi0: At time of recovery, card was
paused
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
scsi0: Dumping Card State at program address 0x13 Mode 0x33
Card was paused
INTSTAT[0x8] SELOID[0x4] SELID[0x40] HS_MAILBOX[0x0]
INTCTL[0x80] SEQINTSTAT[0x0] SAVED_MODE[0x11] DFFSTAT[0x33]
SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] LASTPHASE[0x1]
SCSISEQ0[0x0] SCSISEQ1[0x2] SEQCTL0[0x0] SEQINTCTL[0x0]
SEQ_FLAGS[0xc0] SEQ_FLAGS2[0x4] QFREEZE_COUNT[0x9]
KERNEL_QFREEZE_COUNT[0x9] MK_MESSAGE_SCB[0x0] MK_MESSAGE_SCSIID[0x47]
SSTAT0[0x0] SSTAT1[0x28] SSTAT2[0x0] SSTAT3[0x0]
PERRDIAG[0xc0] SIMODE1[0xa4] LQISTAT0[0x0] LQISTAT1[0x0]
LQISTAT2[0x0] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0]
SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
qinstart = 11319 qinfifonext = 11321
QINFIFO: 0x2 0x0
WAITING_TID_QUEUES:
Pending list:
0 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47]
2 FIFO_USE[0x0] SCB_CONTROL[0x68] SCB_SCSIID[0x47]
Total 2
Kernel Free SCB list: 1 3
Sequencer Complete DMA-inprog list:
Sequencer Complete list:
Sequencer DMA-Up and Complete list:
Sequencer On QFreeze and Complete list:
scsi0: FIFO0 Free, LONGJMP == 0x80ff, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
scsi0: FIFO1 Free, LONGJMP == 0x81f1, SCB 0x0
SEQIMODE[0x3f] SEQINTSRC[0x0] DFCNTRL[0x4] DFSTATUS[0x89]
SG_CACHE_SHADOW[0x2] SG_STATE[0x0] DFFSXFRCTL[0x0]
SOFFCNT[0x0] MDFFSTAT[0x5] SHADDR = 0x00, SHCNT = 0x0
HADDR = 0x00, HCNT = 0x0 CCSGCTL[0x10]
LQIN: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
0x0 0x0 0x0 0x0
scsi0: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
scsi0: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x0
scsi0: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
SIMODE0[0xc]
CCSCBCTL[0x0]
scsi0: REG0 == 0xffff, SINDEX = 0x1e0, DINDEX = 0xe1
scsi0: SCBPTR == 0x0, SCB_NEXT == 0xff00, SCB_NEXT2 == 0xff57
CDB 2a 0 0 80 9 e0
STACK: 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
scsi0:0:4:0: Cmd aborted from QINFIFO
sd 0:0:4:0: scsi: Device offlined - not ready after error recovery
sd 0:0:4:0: scsi: Device offlined - not ready after error recovery
sd 0:0:4:0: SCSI error: return code = 0x00050000
end_request: I/O error, dev sda, sector 128
Buffer I/O error on device sda, logical block 128
Buffer I/O error on device sda, logical block 129
Buffer I/O error on device sda, logical block 130
Buffer I/O error on device sda, logical block 131
Buffer I/O error on device sda, logical block 132
Buffer I/O error on device sda, logical block 133
Buffer I/O error on device sda, logical block 134
Buffer I/O error on device sda, logical block 135
Buffer I/O error on device sda, logical block 136
Buffer I/O error on device sda, logical block 137
sd 0:0:4:0: SCSI error: return code = 0x00050000
end_request: I/O error, dev sda, sector 0
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
sd 0:0:4:0: rejecting I/O to offline device
Sean
next prev parent reply other threads:[~2006-10-19 12:25 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-18 22:24 Adaptec 29320 [aic79xx] fails on power cycle of LUN Sean Bruno
2006-10-18 22:27 ` James Bottomley
2006-10-18 22:32 ` Sean Bruno
2006-10-19 5:52 ` Mike Christie
2006-10-19 12:23 ` Sean Bruno
2006-10-19 12:25 ` Sean Bruno [this message]
2006-10-19 14:10 ` Hannes Reinecke
2006-10-19 16:18 ` Sean Bruno
2006-10-20 7:01 ` Hannes Reinecke
2006-10-21 20:48 ` Sean Bruno
2006-10-22 4:45 ` Sean Bruno
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1161260730.3204.36.camel@home-desk \
--to=sean.bruno@dsl-only.net \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox