* [PATCH 4/9] lpfc 8.1.11 : Adjust LOG_FCP logging
@ 2006-12-02 18:34 James Smart
0 siblings, 0 replies; only message in thread
From: James Smart @ 2006-12-02 18:34 UTC (permalink / raw)
To: linux-scsi
Adjust LOG_FCP logging to be more meaningful.
Signed-off-by: James Smart <James.Smart@emulex.com>
diff -upNr a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
--- a/drivers/scsi/lpfc/lpfc_attr.c 2006-12-02 11:57:07.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_attr.c 2006-12-02 12:06:36.000000000 -0500
@@ -806,7 +806,7 @@ static CLASS_DEVICE_ATTR(lpfc_devloss_tm
# LOG_NODE 0x80 Node table events
# LOG_MISC 0x400 Miscellaneous events
# LOG_SLI 0x800 SLI events
-# LOG_CHK_COND 0x1000 FCP Check condition flag
+# LOG_FCP_ERROR 0x1000 Only log FCP errors
# LOG_LIBDFC 0x2000 LIBDFC events
# LOG_ALL_MSG 0xffff LOG all messages
*/
diff -upNr a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
--- a/drivers/scsi/lpfc/lpfc_logmsg.h 2006-12-01 12:13:54.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h 2006-12-02 12:06:36.000000000 -0500
@@ -28,7 +28,7 @@
#define LOG_NODE 0x80 /* Node table events */
#define LOG_MISC 0x400 /* Miscellaneous events */
#define LOG_SLI 0x800 /* SLI events */
-#define LOG_CHK_COND 0x1000 /* FCP Check condition flag */
+#define LOG_FCP_ERROR 0x1000 /* log errors, not underruns */
#define LOG_LIBDFC 0x2000 /* Libdfc events */
#define LOG_ALL_MSG 0xffff /* LOG all messages */
diff -upNr a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
--- a/drivers/scsi/lpfc/lpfc_scsi.c 2006-12-01 12:13:54.000000000 -0500
+++ b/drivers/scsi/lpfc/lpfc_scsi.c 2006-12-02 12:06:36.000000000 -0500
@@ -297,8 +297,10 @@ lpfc_handle_fcp_err(struct lpfc_scsi_buf
uint32_t fcpi_parm = lpfc_cmd->cur_iocbq.iocb.un.fcpi.fcpi_parm;
uint32_t resp_info = fcprsp->rspStatus2;
uint32_t scsi_status = fcprsp->rspStatus3;
+ uint32_t *lp;
uint32_t host_status = DID_OK;
uint32_t rsplen = 0;
+ uint32_t logit = LOG_FCP | LOG_FCP_ERROR;
/*
* If this is a task management command, there is no
@@ -310,10 +312,25 @@ lpfc_handle_fcp_err(struct lpfc_scsi_buf
goto out;
}
- lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
- "%d:0730 FCP command failed: RSP "
- "Data: x%x x%x x%x x%x x%x x%x\n",
- phba->brd_no, resp_info, scsi_status,
+ if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
+ uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
+ if (snslen > SCSI_SENSE_BUFFERSIZE)
+ snslen = SCSI_SENSE_BUFFERSIZE;
+
+ if (resp_info & RSP_LEN_VALID)
+ rsplen = be32_to_cpu(fcprsp->rspRspLen);
+ memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
+ }
+ lp = (uint32_t *)cmnd->sense_buffer;
+
+ if (!scsi_status && (resp_info & RESID_UNDER))
+ logit = LOG_FCP;
+
+ lpfc_printf_log(phba, KERN_WARNING, logit,
+ "%d:0730 FCP command x%x failed: x%x SNS x%x x%x "
+ "Data: x%x x%x x%x x%x x%x\n",
+ phba->brd_no, cmnd->cmnd[0], scsi_status,
+ be32_to_cpu(*lp), be32_to_cpu(*(lp + 3)), resp_info,
be32_to_cpu(fcprsp->rspResId),
be32_to_cpu(fcprsp->rspSnsLen),
be32_to_cpu(fcprsp->rspRspLen),
@@ -328,14 +345,6 @@ lpfc_handle_fcp_err(struct lpfc_scsi_buf
}
}
- if ((resp_info & SNS_LEN_VALID) && fcprsp->rspSnsLen) {
- uint32_t snslen = be32_to_cpu(fcprsp->rspSnsLen);
- if (snslen > SCSI_SENSE_BUFFERSIZE)
- snslen = SCSI_SENSE_BUFFERSIZE;
-
- memcpy(cmnd->sense_buffer, &fcprsp->rspInfo0 + rsplen, snslen);
- }
-
cmnd->resid = 0;
if (resp_info & RESID_UNDER) {
cmnd->resid = be32_to_cpu(fcprsp->rspResId);
@@ -378,7 +387,7 @@ lpfc_handle_fcp_err(struct lpfc_scsi_buf
*/
} else if ((scsi_status == SAM_STAT_GOOD) && fcpi_parm &&
(cmnd->sc_data_direction == DMA_FROM_DEVICE)) {
- lpfc_printf_log(phba, KERN_WARNING, LOG_FCP,
+ lpfc_printf_log(phba, KERN_WARNING, LOG_FCP | LOG_FCP_ERROR,
"%d:0734 FCP Read Check Error Data: "
"x%x x%x x%x x%x\n", phba->brd_no,
be32_to_cpu(fcpcmd->fcpDl),
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2006-12-02 16:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2006-12-02 18:34 [PATCH 4/9] lpfc 8.1.11 : Adjust LOG_FCP logging James Smart
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).